Allegri 034320010FR001 User Manual

esAs

mbly & Installati

ton Ins

ructions f

034320-010-FR001 Wall lamp

Customer Service :[phone],[phone],[e-mail]
WARMING - TO REDUCE THE RISK OF FIRE OR INJURY:

1.lf you are unfamiliar with electricalwiring, call a qualified electrician to install this unit .More than
one person may be necessary to install fixture ,make sure you have enough qualified help.

2.Turn off the power to the fixture's circuit at the service panel. Use a coltage detector to verify that
the power is off.

3.DO NOT install bulb which exxeeds the maximum wattge specified on the socket label.

Fixture Assembly

Step 1. Place mount mounting and wiring steps before
crystal installation step

r:o

Step 2. Install GE/LED candelabra,do not use
bulbs that exceeds 22W

Lamp body

esAs

mbly & Installati

034320-010-FR001 Wall lamp

Customer Service :[phone],[phone],[e-mail]

Fixtur

e Assembly

ton Ins

ructions f

r:o

Step 5. Fasten 2 (state specification of screw )
into mounting plate so that they extend
away from wall when mounting plate is
installed

Step 6. Attach the mounting plate to outlet box
with sorews

Step 7. Refer to wiring diagram.
Splice the ribbed side of fixture cord
to the white supply wire from outlet box
with wire connector. Splice the smooth
side of the fixture cord to black supply
wire from outlet box with wire connector

Step 8. Carefully tuck in all wires Attach the
backplate with the mounting screw on
the crossbar.Secure fixture with shell
hnobs.

Electrical box

Mounting block

FLAT SCREW

L

8

" screw

32

N

G

LAMP BODY

SOC

Fixture black and white wires

Change to black and white

UND

GRO

ERWI

S

KET

ANDE

NC (I

T) SCEN

Black & white supply wires

RESSE WIHOU