Allegri 032520041FR001 User Manual

r:o

ructions f

ton Ins

mbly & Installati

esAs

032520-041-FR001

Light Sconce

Customer Service :[phone],[phone],[e-mail]

WARMING - TO REDUCE THE RISK OF FIRE OR INJURY:

1.lf you are unfamiliar with electricalwiring, call a qualified electrician to install this unit .More than
one person may be necessary to install fixture ,make sure you have enough qualified help.

2.Turn off the power to the fixture's circuit at the service panel. Use a coltage detector to verify that
the power is off.

3.DO NOT install bulb which exxeeds the maximum wattge specified on the socket label.

Step 1. Place mount mounting and wiring steps before
crystal installation step

40W BULBS

Step 2.

Install candelabra bulb,do not use
bulbs that exceeds 40W.

MAIN FIXTURE

C20-16-06-01C20-16-06-01

Main fixture

Frame for hanging crystal bead

Assemble frame for hanging crystal bead
to the lamp body as shown,Align holes in
frame for hanging crystal bead with holes
in fixture,and secure frame for hanging crystal
bead to fixture using headiess screw

Step 3.

screw

Fixture Assembly

T)

SCEN

ANDE

NC

(I

KET

SOC

S

ERWI

UND

GRO

RESSE WIHOU

r:o

ructions f

ton Ins

mbly & Installati

esAs

Customer Service :[phone],[phone],[e-mail]

Step 4. Fasten 2 (state specification of screw )
into mounting plate so that they extend
away from wall when mounting plate is
installed

Step 5. Attach the mounting plate to outlet box
with sorews

Black & white supply wires

Fixture black and white wires

Change to black and white

Step 6. Refer to wiring diagram.
Splice the ribbed side of fixture cord
to the white supply wire from outlet box
with wire connector. Splice the smooth
side of the fixture cord to black supply
wire from outlet box with wire connector

Step 7. Carefully tuck in all wires Attach the
backplate with the mounting screw on
the crossbar.Secure fixture with shell
hnobs.

032520-041-FR001

Light Sconce

N

L

G

ELECTRICAL BOX

MOUNTING BLOCK

LAMP BODY

screw

Fixtur

e Assembly