Allegri 027720010FR001 User Manual

esAs

mbly & Installati

ton Ins

ructions f

027720-010-FR001

Customer Service: [phone], [phone], [e-mail]
WARNING - TO REDUCE THE RISK OF FIRE OR INJURY:

1.lf you are unfamiliar with electrical wiring, call a qualified electrician to install this unit .More than
one person may be necessary to install fixture ,make sure you have enough qualified help.

2.Turn off the power to the fixture's circuit at the service panel. Use a voltage detector to verify that
the power is off.

3.DO NOT install bulb which exceeds the maximum wattage specified on the socket label.

e AssemblyFixtur

Step 1. Connect the inner wire , then fixing the backplate ,
after that we can install the bulb and crystal tray

Step 2. Assemble crystal tray to the lamp body
as shown,Align holes in crystal tray with holes in
fixture .

r:o

Step 3.

Install E12 bulbs,do not use bulbs that
exceeds 40W

D3112-000-10

单支架85mm，总高102mm

40W BULBS

Cannula

Crystal tray

Main body

esAs

mbly & Installati

027720-010-FR001

Customer Service: [phone], [phone], [e-mail]

Fixtur

e Assembly

ton Ins

ructions f

r:o

Step 4. Fasten 2 (state specification of screw )
into mounting plate so that they extend
away from wall when mounting plate is
installed

Step 5. Attach the mounting plate to outlet box
with screws

Step 6. Refer to wiring diagram.
Splice the ribbed side of fixture cord
to the white supply wire from outlet box
with wire connector. Splice the smooth
side of the fixture cord to black supply
wire from outlet box with wire connector

Step 7. Carefully tuck in all wires Attach the
back plate with the mounting screw on
the crossbar.Secure fixture with shell
knobs.

SOC

KET

ELECTRICAL BOX

MOUNTING BLOCK

FLAT SCREW

L

N

G

LAMP BODY

ANDE

NC (I

T) SCEN

Black & white supply wires

RESSE WIHOU

Fixture black and white wires

Change to black and white

UND

GRO

ERWI

S