Allegri 027621038SE001, 027621038FR001, 027621010SE001, 027621010FR001 User Manual

esAs

mbly & Installati

ton Ins

ructions f

027621 6-Light Wall lamp

Customer Service :[phone],[phone],[e-mail]
WARNING - TO REDUCE THE RISK OF FIRE OR INJURY:

1.lf you are unfamiliar with electrical wiring, call a qualified electrician to install this unit .More than
one person may be necessary to install fixture ,make sure you have enough qualified help.

2.Turn off the power to the fixture's circuit at the service panel. Use a voltage detector to verify that
the power is off.

3.DO NOT install bulb which exceeds the maximum wattage specified on the socket label.

Fixture Assembly

Step 1. Place mount mounting and wiring steps before
crystal installation step

Step 2. Fix part crystal to part main body by using
flat screw .

r:o

Step 3. Install E12 bulbs ,do not use
bulbs that exceeds 40W

crystal

Flat screw

Main body

40W BULBS

esAs

mbly & Installati

027621 2-Light Wall lamp

Customer Service :[phone],[phone],[e-mail]

Fixtur

e Assembly

Step 4. Fasten 2 (state specification of screw )
into mounting plate so that they extend
away from wall when mounting plate is
installed

ELECTRICAL BOX

MOUNTING BLOCK

ton Ins

ructions f

r:o

Step 5. Attach the mounting plate to outlet box
with sorews

Step 6. Refer to wiring diagram.
Splice the ribbed side of fixture cord
to the white supply wire from outlet box
with wire connector. Splice the smooth
side of the fixture cord to black supply
wire from outlet box with wire connector

Step 7. Carefully tuck in all wires Attach the
backplate with the mounting screw on
the crossbar.Secure fixture with shell
hnobs.

SOC

KET

DECORATIVE NUTS

LAMP BODY

L

N

G

LAMP BODY

ANDE

NC (I

T) SCEN

Black & white supply wires

RESSE WIHOU

Fixture black and white wires

Change to black and white

UND

GRO

ERWI

S