Allegri 027421047FR001 User Manual

r:o

ructions f

ton Ins

mbly & Installati

esAs

027421-047-FR001 2-Light Wall lamp

Customer Service :[phone],[phone],[e-mail]

WARMING - TO REDUCE THE RISK OF FIRE OR INJURY:

1.lf you are unfamiliar with electricalwiring, call a qualified electrician to install this unit .More than
one person may be necessary to install fixture ,make sure you have enough qualified help.

2.Turn off the power to the fixture's circuit at the service panel. Use a coltage detector to verify that
the power is off.

3.DO NOT install bulb which exxeeds the maximum wattge specified on the socket label.

Step 1. Place mount mounting and wiring steps before
crystal installation step

Step 3. Part sleeve barrel to part Lamp body.

Step 4. Install E12 candelabra,do not use

bulbs that exceeds 60W

crystal bunch

Lamp body

bulb 60W

sleeve barrel

Fixture Assembly

r:o

ructions f

ton Ins

mbly & Installati

esAs

Customer Service :[phone],[phone],[e-mail]

Step 5. Fasten 2 (state specification of screw )
into mounting plate so that they extend
away from wall when mounting plate is
installed

Step 6. Attach the mounting plate to outlet box
with sorews

Step 7. Refer to wiring diagram.
Splice the ribbed side of fixture cord
to the white supply wire from outlet box
with wire connector. Splice the smooth
side of the fixture cord to black supply
wire from outlet box with wire connector

Step 8. Carefully tuck in all wires Attach the
backplate with the mounting screw on
the crossbar.Secure fixture with shell
hnobs.

T)

SCEN

ANDE

NC

(I

KET

SOC

S

ERWI

UND

GRO

RESSE WIHOU

N

L

G

Electrical box

Mounting block

LAMP BODY

Black & white supply wires

Fixture black and white wires

Change to black and white

Wall plugs

Tapping screw

8

32

" screw

FLAT SCREW

027421-047-FR001 2-Light Wall lamp

Fixtur

e Assembly