Allegri 026942010FR001 User Manual

esAs

mbly & Installati

026942-010-FR001 Ceiling Lamp

ton Ins

ructions f

Customer Service :[phone],[phone],[e-mail]
WARNING - TO REDUCE THE RISK OF FIRE OR INJURY:

1.lf you are unfamiliar with electrical wiring, call a qualified electrician to install this unit .More than
one person may be necessary to install fixture ,make sure you have enough qualified help.

2.Turn off the power to the fixture's circuit at the service panel. Use a voltage detector to verify that
the power is off.

3.DO NOT install bulb which exceeds the maximum wattage specified on the socket label.

e AssemblyFixtur

Step 1. Fasten 2 8-32 screws to mounting plate so that
they extend away from the wall when mounting

plate is installed

Step 2. Attach mounting plate to electrical box using
2 8-32 machine screws

Step 3. Fix metal shade to plate by using screws,then
raise this part to ceiling by nipple

J-BOX

Mounting bl ock
M4 Screw

8

32

r:o

" Screw

Step 4. Install E12 bulbs,do not use bulbs that

exceeds 60W

Step 5. Fix glass shade to main body by using

metal lathe

Canopy

Nipple

Main body

Canopy

Steeve

60W BULBS

Canopy

Steeve

Round tube

Metal lathe

Metal lathe

Metal lathe

Glass shad e

026942-010-FR001 Ceiling Lamp

Customer Service :[phone],[phone],[e-mail]

Fixtur

e Assembly

Step 6. Fasten 2 (state specification of screw )
into mounting plate so that they extend
away from wall when mounting plate is
installed

r:oructions fton Insmbly & InstallatiesAs

ELECTRICAL BOX

Step 7. Attach the mounting plate to outlet box
with screws

Step 8. Refer to wiring diagram.
Splice the ribbed side of fixture cord
to the white supply wire from outlet box
with wire connector. Splice the smooth
side of the fixture cord to black supply
wire from outlet box with wire connector

Step 9. Carefully tuck in all wires Attach the
back plate with the mounting screw on
the crossbar.Secure fixture with shell
knobs.

SOC RESSE WIHOU

Fixture black and white wires

Change to black and white

Ground wires

KET

MOUNTING PL AT E

8/32*L30mm
MACHINE SCREWS

CANOPY STEM

Nuts

ANDE

NC (I

T) SCEN

Black & white supply wires