Allegri 026941010FR001 User Manual

esAs
mbly & Installati
026941-010-FR001 Ceiling Lamp
ton Ins
ructions f
Customer Service :(702)361-4345,(800)525-2655,customer.service@kalco.com WARNING - TO REDUCE THE RISK OF FIRE OR INJURY:
1.lf you are unfamiliar with electrical wiring, call a qualified electrician to install this unit .More than one person may be necessary to install fixture ,make sure you have enough qualified help.
2.Turn off the power to the fixture's circuit at the service panel. Use a voltage detector to verify that the power is off.
3.DO NOT install bulb which exceeds the maximum wattage specified on the socket label.
e AssemblyFixtur
Step 1. Fasten 2 8-32 screws to mounting plate so that they extend away from the wall when mounting
plate is installed
Step 2. Attach mounting plate to electrical box using 2 8-32 machine screws
Step 3. Fix metal shade to plate by using screws,then raise this part to ceiling by nipple
J-BOX
Mounting block M4 Screw
8
32
r:o
" Screw
Step 4. Install E12 bulbs,do not use bulbs that
exceeds 60W
Step 5. Fix glass shade to main body by using
metal lathe
Canopy
Nipple
Main body
Canopy
Steeve
60W BULBS
Canopy
Steeve
Round tube
Metal lathe
Metal lathe
Metal lathe
Glass shade
esAs
mbly & Installati
026941-010-FR001 Ceiling Lamp
Customer Service :(702)361-4345,(800)525-2655,customer.service@kalco.com
Fixtur
e Assemb ly
Step 6. Fasten 2 (state specification of screw ) into mounting plate so that they extend away from wall when mounting plate is installed
ton Ins
ructions f
ELECTRICAL BOX
r:o
Step 7. Attach the mounting plate to outlet box with screws
Step 8. Refer to wiring diagram. Splice the ribbed side of fixture cord to the white supply wire from outlet box with wire connector. Splice the smooth side of the fixture cord to black supply wire from outlet box with wire connector
Step 9. Carefully tuck in all wires Attach the back plate with the mounting screw on the crossbar.Secure fixture with shell knobs.
Fixture black and white wires
Change to black and white
Ground wires
MOUNTING PLATE
8/32*L30mm MACHINE SCREWS
CAN OPY STEM
Nuts
T) SCENANDENC (IKETSOC RESSE WIHOU
Black & white supply wires
Loading...