Allegri 026921010FR001 User Manual

026921 3-Light Wall lamp

Customer Service :[phone],[phone],[e-mail]
WARMING - TO REDUCE THE RISK OF FIRE OR INJURY:

1.lf you are unfamiliar with electricalwiring, call a qualified electrician to install this unit .More than
one person may be necessary to install fixture ,make sure you have enough qualified help.

2.Turn off the power to the fixture's circuit at the service panel. Use a coltage detector to verify that
the power is off.

3.DO NOT install bulb which exxeeds the maximum wattge specified on the socket label.

e AssemblyFixtur

Step 1. Place mount mounting and wiring steps before
crystal installation step

r:oructions fton Insmbly & InstallatiesAs

Step 2. Assemble

as shown,Align holes in glass tray with holes in
fixture and secure glass tray to fixture using
headless screw

Step 3.

Lnstall candelabra bulbs bulb,do not use
bulbs that exceeds 40W

glass tray to the lamp body

GLASS TRAY

LAMP BOD Y

40W BULBS

LAMP BODY

esAs

mbly & Installati

Customer Service :[phone],[phone],[e-mail]

Fixtur

e Assembly

ton Ins

308421 3-Light Wall Sconce

ructions f

r:o

Step 4. Fasten 2 (state specification of screw )
into mounting plate so that they extend
away from wall when mounting plate is
installed

Step 5. Attach the mounting plate to outlet box
with screws

Step 6. Refer to wiring diagram.
Splice the ribbed side of fixture cord
to the white supply wire from outlet box
with wire connector. Splice the smooth
side of the fixture cord to black supply
wire from outlet box with wire connector

Step 7. Carefully tuck in all wires Attach the
back plate with the mounting screw on
the crossbar.Secure fixture with shell
knobs.

SOC

KET

ELECTRICAL BOX

MOUNTING BLOCK

FLAT SCREW

L

N

G

LAMP BODY

ANDE

NC (I

T) SCEN

Black & white supply wires

RESSE WIHOU

Fixture bl ack and whit e wire s

Change to black and white

UND

GRO

ERWI

S