Allegri 026920010FR001 User Manual

026920 2-Light Wall lamp

Customer Service :[phone],[phone],[e-mail]
WARMING - TO REDUCE THE RISK OF FIRE OR INJURY:

1.lf you are unfamiliar with electricalwiring, call a qualified electrician to install this unit .More than
one person may be necessary to install fixture ,make sure you have enough qualified help.

2.Turn off the power to the fixture's circuit at the service panel. Use a coltage detector to verify that
the power is off.

3.DO NOT install bulb which exxeeds the maximum wattge specified on the socket label.

e AssemblyFixtur

Step 1. Place mount mounting and wiring steps before
crystal installation step

r:oructions fton Insmbly & InstallatiesAs

Step 2. Assemble

as shown,Align holes in glass tray with holes in
fixture and secure glass tray to fixture using
headless screw

Step 3.

Lnstall candelabra bulbs bulb,do not use
bulbs that exceeds 40W

glass tray to the lamp body

GLASS TRAY

LAMP B O DY

40W BULBS

LAMP BODY

Customer Service :[phone],[phone],[e-mail]

Fixtur

e Assembly

308420 1-Light Wall Sconce

r:oructions fton Insmbly & InstallatiesAs

Step 4. Fasten 2 (state specification of screw )
into mounting plate so that they extend
away from wall when mounting plate is
installed

Step 5. Attach the mounting plate to outlet box
with screws

Step 6. Refer to wiring diagram.
Splice the ribbed side of fixture cord
to the white supply wire from outlet box
with wire connector. Splice the smooth
side of the fixture cord to black supply
wire from outlet box with wire connector

Step 7. Carefully tuck in all wires Attach the
back plate with the mounting screw on
the crossbar.Secure fixture with shell
knobs.

ELECTRICAL BOX

MOUNTING BLOCK

L

N

G

T) SCENANDENC (IKETSOC

FLAT SCREW

LAMP B ODY

RESSE WIHOU

Black & white supply wires

Fixture black and white wires

Change to black and white

UNDGRO

SERWI