Allegri 026222010FR001, 026222018FR001 User Manual

esAs

mbly & Installati

ton Ins

ructions f

026222-010-FR001 10-Light wall Sconce

Customer Service :[phone],[phone],[e-mail]
WARNING - TO REDUCE THE RISK OF FIRE OR INJURY:

1.lf you are unfamiliar with electrical wiring, call a qualified electrician to install this unit .More than
one person may be necessary to install fixture ,make sure you have enough qualified help.

2.Turn off the power to the fixture's circuit at the service panel. Use a voltage detector to verify that
the power is off.

3.DO NOT install bulb which exceeds the maximum wattage specified on the socket label.

e AssemblyFixtur

Step 1. Place mount mounting and wiring steps before
crystal installation step

Step 2. Assemble crystal strand to the lamp body
as shown,Align holes in crystal strand with holes in
fixture and secure crystal strand to fixture using
headless screw

Step 3.

Medium base bulb,do not use
bulbs that exceeds 60W

Crystal strand

Lamp body

r:o

60W Bulbs

esAs

026222-010-FR001 10-Light wall Sconce

mbly & Installati

Customer Service :[phone],[phone],[e-mail]

Fixtur

e Assembly

ton Ins

ructions f

r:o

Step 4. Fasten 2 (state specification of screw )
into mounting plate so that they extend
away from wall when mounting plate is
installed

Step 5. Attach the mounting plate to outlet box
with screws

Step 6. Refer to wiring diagram.
Splice the ribbed side of fixture cord
to the white supply wire from outlet box
with wire connector. Splice the smooth
side of the fixture cord to black supply
wire from outlet box with wire connector

Step 7. Carefully tuck in all wires Attach the
back plate with the mounting screw on
the crossbar.Secure fixture with shell
knobs.

ELECTRICAL BOX

MOUNTING BLOCK

DECORATIVE NUT S

L

N

LAMP BODY

G

Tappi ng scre w

Wall plugs

SOC

Fixture black and white wires

Change to black and white

UND

GRO

SERWI

KET

ANDE

NC (I

T) SCEN

Black & white supply wires

RESSE WIHOU