Allegri 026221010FR001, 026221018FR001 User Manual

026221-010-FR001 8-Light wall Sconce

Customer Service :[phone],[phone],[e-mail]
WARNING - TO REDUCE THE RISK OF FIRE OR I NJ URY:

1.lf you are unfamiliar with electrical wiring, call a qualified electrician to install this unit .More than
one person may be necessary to install fixture ,make sure you have enough qualified help.

2.Turn off the power to the fixture's circuit at the service panel. Use a voltage detector to verify that
the power is off.

3.DO NOT install bulb which exceeds the maximum wattage specified on the socket label.

Step 1. Place mount mounting and wiring steps before
crystal installation step

Step 2. Assemble crystal strand to the lamp body
as shown.

Step 3.

Install candelabra bulbs, do
not use bulbs that exceeds

40W

Crystal strand

Lamp body

40W Bulbs

026221-010-FR001 8-Light wall Sconce

Customer Service :[phone],[phone],[e-mail]

Step 4. Fasten 2 (state specification of screw )
into mounting plate so that they extend
away from wall when mounting plate is
installed

Step 5. Attach the mounting plate to outlet box
with screws

Step 6. Refer to wiring diagram.
Splice the ribbed side of fixture cord
to the white supply wire from outlet box
with wire connector. Splice the smooth
side of the fixture cord to black supply
wire from outlet box with wire connector

Step 7. Carefully tuck in all wires Attach the
back plate with the mounting screw on
the crossbar.Secure fixture with shell
knobs.

ELECTRICAL BOX

MOUNTING BLOCK

DECORATIVE NUTS

L

N

LAMP BODY

G

Tapping screw

Fixture black and white wires

Change to black and white

UNDGRO

ERWI

S

Wall plugs

T)SCENANDENC (IKETSOC

Black & white supply wires

RESSE WIHOU