Allegri 026220018FR001, 026220010FR001 User Manual

026220 6-Light wall Sconce

Customer Service :[phone],[phone],[e-mail]
WARNING - TO REDUCE THE RISK OF FIRE OR INJURY:

1.lf you are unfamiliar with electrical wiring, call a qualified electrician to install this unit .More than
one person may be necessary to install fixture ,make sure you have enough qualified help.

2.Turn off the power to the fixture's circuit at the service panel. Use a voltage detector to verify that
the power is off.

3.DO NOT install bulb which exceeds the maximum wattage specified on the socket label.

Step 1. Install cross bar as shown with outlet box
original screws. Make sure cross bar studs points
away from wall.

Step 2. Get fixture frame few inches close to wall
and make wire connections as follows:
Refer to wiring diagram. Splice the ribbed side of
fixture cord to the white supply wire from outlet
box with wire connector. Splice the smooth side
of the fixture cord to black supply wire from outlet
box with wire connector

Step 3. Carefully tuck in all wires Attach the back
plate with the mounting screw on the crossbar.
Secure fixture with decorative Nuts

Step 4. Install light bulbs and test wire
connections.

ELECTRICAL BOX

MOUNTING BLOCK

DECORATIVE NUTS

L

N

Fixture Frame

G

Tapping sc rew

Wall plugs

Proceed to install crystal strands as shown in
page 2.

P1

Fixture bla c k an d white wires

Change to black and white

UNDGRO

ERWI

S

T)SCENANDENC (IKETSOC

Black & white supply wires

RESSE WIHOU

026220 6-Light wall Sconce

Customer Service :[phone],[phone],[e-mail]

1. Please Note the 26 (B) crystals comes factory
assembled on frame.

Crystal A 26 pcs.

2. Install 32 (A) crystals to the side slots of frame. as
shown in fig.1

1. Install 32 (A) crystals to the side slots of frame. as shown
in fig.1

Crystal B 32 pcs.

1.Instertcrystal
toframeslot
sidewaysatthis
height.

fig1

2.Onceinside
ofslottwistand
release.

P2