Allegri 025720018FR001, 025720010FR001 User Manual

esAs

mbly & Installati

ton Ins

ructions f

025720

Customer Service: [phone], [phone], [e-mail]
WARNING - TO REDUCE THE RISK OF FIRE OR INJURY:

1.lf you are unfamiliar with electrical wiring, call a qualified electrician to install this unit .More than
one person may be necessary to install fixture ,make sure you have enough qualified help.

2.Turn off the power to the fixture's circuit at the service panel. Use a voltage detector to verify that
the power is off.

3.DO NOT install bulb which exceeds the maximum wattage specified on the socket label.

e AssemblyFixtur

Step 1. Place mount mounting and wiring steps before
marble installation step

Step 2. Assemble crystal bowl to the lamp body
as shown,Align holes in crystal with holes in fixture
Fix part main body to part base plate to using
flat screw .
Fix part crystal dish to part main body to using
fmetal lathe.

metal lathe

crystal dish

r:o

C20-16-06-01

Step 3.

flat screw

Install candelabra,do not use
bulbs that exceeds 40W

60W bulb

base plate

main body

C20-16-06-01

flat screw

crystal dish

metal lathe

esAs

mbly & Installati

025720

Customer Service: [phone], [phone], [e-mail]

Fixtur

e Assembly

ton Ins

ructions f

r:o

Step 4. Fasten 2 (state specification of screw )
into mounting plate so that they extend
away from wall when mounting plate is
installed

Step 5. Attach the mounting plate to outlet box
with screws

Step 6. Refer to wiring diagram.
Splice the ribbed side of fixture cord
to the white supply wire from outlet box
with wire connector. Splice the smooth
side of the fixture cord to black supply
wire from outlet box wi th wire co nnector

Step 7. Carefully tuck in all wires Attach the
back plate with the mounting screw on
the crossbar.Secure fixture with shell
knobs.

SOC

Fixture black and white wires

Change to black and white

KET

ELECTRICAL BOX

MOUNTING BLOCK

FLAT SCREW

L

N

LAMP BODY

G

ANDE

NC (I

T) SCEN

Black & white supply wires

RESSE WIHOU

GRO

UND

ERWI

S