Allegri 023821010FR001 User Manual

023821-010-FR001 2-Light Wall lamp

Customer Service :[phone],[phone],[e-mail]
WARNING - TO REDUCE THE RISK OF FIRE OR INJURY:

1.lf you are unfamiliar with electrical wiring, call a qualified electrician to install this unit .More than
one person may be necessary to install fixture ,make sure you have enough qualified help.

2.Turn off the power to the fixture's circuit at the service panel. Use a voltage detector to verify that
the power is off.

3.DO NOT install bulb which exceeds the maximum wattage specified on the socket label.

e AssemblyFixtur

Step 1. Connect the inner wire , then fixing the backplate ,
after that we can install the bulb and crystal tray

Step 2. Assemble crystal tray to the lamp body
as shown,Align holes in crystal tray with holes in
fixture .

CRYSTAL TRAY

r:oructions fton Insmbly & InstallatiesAs

Step 3.

Install E12 bulbs,do not use bulbs that
exceeds 40W

ROUND TUBE

LAMP BODY

40W BULBS

LAMP BODY

esAs

023821-010-FR001 2-Light Wall lamp

mbly & Installati

Customer Service :[phone],[phone],[e-mail]

Fixtur

e Assembly

ton Ins

ructions f

r:o

Step 4. Fasten 2 (state specification of screw )
into mounting plate so that they extend
away from wall when mounting plate is
installed

Step 5. Attach the mounting plate to outlet box
with screws

Step 6. Refer to wiring diagram.
Splice the ribbed side of fixture cord
to the white supply wire from outlet box
with wire connector. Splice the smooth
side of the fixture cord to black supply
wire from outlet box with wire connector

Step 7. Carefully tuck in all wires Attach the
back plate with the mounting screw on
the crossbar.Secure fixture with shell
knobs.

ELECTRICAL BOX

MOUNTING BLOCK

L

N

G

T) SCENANDENC (IKETSOC

METAL LATHE

LAMP BODY

RESSE WIHOU

Black & white supply wires

Fixture black and white wires

Change to black and white

UND

GRO

SERWI