Allegri 023520010FR001, 023520010SE001 User Manual

esAs

mbly & Installati

ton Ins

ructions f

023520-010-FR001

Customer Service :[phone],[phone],[e-mail]
WARMING - TO REDUCE THE RISK OF FIRE OR INJURY:

1.lf you are unfamiliar with electricalwiring, call a qualified electrician to install this unit .More than
one person may be necessary to install fixture ,make sure you have enough qualified help.

2.Turn off the power to the fixture's circuit at the service panel. Use a coltage detector to verify that
the power is off.

3.DO NOT install bulb which exxeeds the maximum wattge specified on the socket label.

Fixture Assembly

Step 1. Place mount mounting and wiring steps before
glass installation step

CRYSTAL BOWL

Step 2. Assemble crystal to the lamp body
as shown,Align holes in crystal with holes in fixture
and secure crystal to fixture using headless screw

r:o

Step 3.

Lnstall candelabra bulbs,do not use
bulbs that exceeds 40W

LAMP BODY

40W BULBS

2

LAMP BODY

1

esAs

mbly & Installati

023520-010-FR001 2-Light Socnce

Customer Service :[phone],[phone],[e-mail]

Fixtur

e Assembly

ton Ins

ructions f

r:o

Step 4. Fasten 2 (state specification of screw )
into mounting plate so that they extend
away from wall when mounting plate is
installed

Step 5. Attach the mounting plate to outlet box
with sorews

Step 6. Refer to wiring diagram.
Splice the ribbed side of fixture cord
to the white supply wire from outlet box
with wire connector. Splice the smooth
side of the fixture cord to black supply
wire from outlet box with wire connector

Step 7. Carefully tuck in all wires Attach the
backplate with the mounting screw on
the crossbar.Secure fixture with shell
hnobs.

SOC

KET

ELECTRICAL BOX

MOUNTING BLOCK

N

L

G

ANDE

SCEN

T)

Black & white supply wires

(I

NC

LAMP BODY

FLAT SCREW

RESSE WIHOU

Fixture black and white wires

Change to black and white

UND

GRO

ERWI

S