Allegri 023423010FR006, 023423010FR001 User Manual

023423-010-FR006 Bedford 3-Light Socnce

Customer Service :[phone],[phone],[e-mail]
WARMING - TO REDUCE THE RISK OF FIRE OR INJURY:

1.lf you are unfamiliar with electricalwiring, call a qualified electrician to install this unit .More than
one person may be necessary to install fixture ,make sure you have enough qualified help.

2.Turn off the power to the fixture's circuit at the service panel. Use a coltage detector to verify that
the power is off.

3.DO NOT install bulb which exxeeds the maximum wattge specified on the socket label.

e AssemblyFixtur

Step 1. Place mount mounting and wiring steps before
crystal installation step

Step 2. Assemble crystal bowl to the lamp body
as shown,Align holes in crystal bowl with holes in
fixture and secure crystal bowl to fixture using
headless screw

CRYSTAL BOWL

r:oructions fton Insmbly & InstallatiesAs

Step 3.

Lnstall candelabra bulbs bulb,do not use
bulbs that exceeds 60W

60W BULBS

2
5

25

30

LAMP BODY

25 25

25

2
5

25

30

25 25

25

MAIN FIXTURE

023423-010-FR006 Bedford 3-Light Socnce

Customer Service :[phone],[phone],[e-mail]

Fixtur

e Assembly

r:oructions fton Insmbly & InstallatiesAs

Step 4. Fasten 2 (state specification of screw )
into mounting plate so that they extend
away from wall when mounting plate is
installed

Step 5. Attach the mounting plate to outlet box
with sorews

Step 6. Refer to wiring diagram.
Splice the ribbed side of fixture cord
to the white supply wire from outlet box
with wire connector. Splice the smooth
side of the fixture cord to black supply
wire from outlet box with wire connector

Step 7. Carefully tuck in all wires Attach the
backplate with the mounting screw on
the crossbar.Secure fixture with shell
hnobs.

T) SCENANDENC (IKETSOC

ELECTRICAL BOX

MOUNTING BLOCK

LAMP BODY

L

DECORATIVE NUTS

N

G

RESSE WIHOU

Black & white supply wires

Fixture black and white wires

Change to black and white

UNDGRO

ERWI

S