30 MA881 - Electrified Fail Secure (EU) - 12 & 24V, with or
without RX
31 MA911 - Classroom Dead Lock
32 MA921 - Dead Lock
33 MA931 - Dead Lock
34 MA941 - Dead Lock
35 MA12 - Single Dummy
36 MA18 - Double Dummy
37 Parts and Accessories
37 Knob and Lever Designs
37 Screw Packs
39 Cams
40 Mortise, rim and cam lock for standard cylinders
40 Strikes
41 Cylinder collars
41 Escutcheon Trim Rings
41 Sectional Trim Rings
42 Trim Rings & Collars
43 Ordering Procedures
43 Finishes
43 Door Handing
Introduction
Introduction
This manual contains a complete listing of parts and assemblies for MA-Series mortise locks manufactured by Falcon Lock
Company. This edition lists components of MA-Series locks manufactured aer February, 2011. All lock case covers are
labeled with dates to identify year of manufacture. Example: 2311 = the 23rd week of 2011.
Exploded views of each lock function and trim assembly are provided with accompanying charts to identify parts for
replacement purposes. Exploded views of trim are shown with parts for standard size doors. In addition, this manual
provides lock trim ordering procedures, cylinder length charts by door range, and all auxiliary components of the MA-Series
mortise locks.
Standard Features*
CertificationsANSI A156 .13, Series 1000, Grade 1 Operation and Security, UL Listed for 3-hour fire door
Latch2-piece brass mechanical anti-friction bolt, ³⁄v” projection
Strike1Z⁄v” x 4M⁄,”, ANSI, Square corner, with dust box
Cylinder6-Pin solid brass, keyed 5-pin, Falcon G keyway, keyed different (KD)
Door Range1³⁄v” standard
KeysTwo, nickel silver cut keys per lock, Falcon G keyway
Backset2³⁄v”
* Locks are furnished with standard features unless otherwise specified.
Lock Case Dimensions
1” (25)
6”
(152)
3³⁹⁄₆₄”
(92)
2²⁷⁄₆₄”
(62)
1³⁄₁₆” (30)
Lock
1³⁄₁₆” (30)
2³⁄₄” (70)
4⁵⁄₃₂” (106)
¹⁄₄” (6)
1” (25)
1¹⁷⁄₆₄” (32)
3⁴⁹⁄₆₄”
(96)
³⁄₄” (19)
²³⁄₁₀₀”
(6)
8”
(203)
6³⁄₈”
(162)
3²¹⁄₃₂”
Faceplate
(93)
3²¹⁄₃₂”
(93)
1⁹⁄₆₄”
1¹⁄₃₂”
(26)
1²⁷⁄₃₂”
(29)
(47)
A
⁹⁄₁₆” (14)
⁴⁵⁄₆₄” (18)
¹¹⁄₃₂”
(9)
²⁵⁄₃₂” (20)
1¹⁄₄” (32)
¹⁄₄” (6)
4⁷⁄₈”
(124)
1¹⁄₄”
(32)
Strike
Strike
(A) Door ThicknessLip Size
1³⁄v” - 1M⁄,”1Z⁄v” (32 mm)
2” - 2Z⁄,”1M⁄zn” (37 mm)
2Z⁄v” - 2³⁄,”1>⁄zn” (40 mm)
2Z⁄x” - 2B⁄,”1ZZ⁄zn” (43 mm)
4¹⁄₈”
(105)
4 • Falcon • MA-Series service manual
Introduction
rn
Lock assembly drawing index
The Lock Assembly Drawing Index provides visual representations and textual
descriptions of available functions. Page numbers for full trim and chassis
drawings are referenced.
To order Falcon MA Series locksets, please consult page 5 for ordering
information and assistance.
Catalog Number Prefixes: Add the following prefix for the appropriate trim
style.
Î Note: If a special function is required and not listed here, please contact the
factory for assistance.
FunctionANSI A156.13, 2005Page
Falcon ANSIDescriptionFunction
MA101 F01 Passage/Closet LatchsetLatch bolt by knob/levers at all times.9
Rigid Knob
Key
Blank Plate
Knob
T-Tu
Key
Lever
MA161 F31 Connecting Room/Exit LatchLatch bolt operated by knob/lever from inside. No trim outside. Auxiliary dead latch.10
MA301 F02 Privacy LockLatch bolt by knobs/levers either side, dead bolt by turn inside or emergency release
outside.
MA311 F19 Privacy, Bedroom or Bath LockLatch bolt by knobs/levers. Deadbolt by turn from inside and emergency release
outside. Rotating inside knob/lever retracts both bolts.
MA321 F22 Privacy LockLatch bolt operated by knob/lever from either side except when outside knob/lever
is locked by inside T-turn. Operating inside knob/lever, closing door or operating
outside emergency release unlocks outside knob/lever.
MA371 F14 Store Door LockLatch bolt by knobs/levers. Deadbolt by key from either side.14
11
12
13
MA381 F09 Apartment, Exit LockLatch bolt operated by knob/lever from either side, except when outside knob/lever
is locked by key from inside. When outside knob/lever is locked, latch bolt is
15
retracted by key from outside or by operating inside lever. Auxiliary dead latch.
Falcon • MA-Series service manual • 5
Introduction
MA411 F30 Asylum LockLatch bolt operated by key from either side. Both knobs/levers always inoperative.
MA431 F34 Classroom Security Lock with
Deadbolt
MA441 F32 Classroom Security LockLatch bolt operated by knob/lever from either side except when outside knob/lever
MA451 F15 Hotel/Guest LockLatch bolt operated by key from outside or by operating inside knob/lever. Outside
MA521 F04 Entry/Oce LockLatch bolt operated by knob/lever from either side except when outside knob/lever
Auxiliary dead latch.
Latch bolt operated by knob/lever from either side except when outside knob/lever
is locked from inside or outside by key. Dead bolt retracted by key from inside or
outside. Operating inside knob/lever retracts both bolts and unlocks outside. Latch
bolt dead locked when dead bolt is thrown.
is locked from inside or outside by key. When outside knob/lever is locked, latch bolt
is retracted by key from inside or outside or by operating inside knob/lever. Auxiliary
dead latch.
knob/lever is always inoperative. Dead bolt projected by turn from inside and all
keys except emergency key are shut out. Operating inside knob/lever retracts both
bolts. Auxiliary dead latch.
is made inoperative by buttons in face. When outside knob/lever is locked, latch bolt
is retracted by key from outside or by operating inside knob/lever. Auxiliary dead
latch.
When dead bolt is retracted, knob/lever is unlocked by buttons in face.
16
17
18
19
20
MA531 F20 Apartment Corridor Door LockLatch bolt operated by knob/lever from either side, except when outside knob/lever
is made inoperative by buttons in face. Dead bolt operated by key outside or turn
inside. Key outside operates both bolts. Operating inside knob/lever retracts both
bolts and outside remains locked. Latch bolt is deadlocked when outside knob/
lever is made inoperative or when the dead bolt is projected. When dead bolt is
retracted, knob/lever is unlocked by buttons in face.
MA541 F21 Entry/Oce LockLatch bolt by knobs/levers either side. Deadbolt by key outside or turn inside.22
MA551 F06 Holdback LockLatch bolt operated by lever from either side except when outside lever is locked
from outside by key. Latch bolt can be locked in a retracted position by key. When
outside lever is locked, latch bolt is retracted by key from outside or by operating
inside lever unless latch bolt has been locked in a retracted position. Auxiliary dead
latch.
Note: Chassis is handed.
MA561 F05 Classroom LockLatch bolt operated by knob/lever from either side except when outside knob/lever
is locked by key. WHen outside knob/lever is locked, latchbolt is retracted by key
from outside or by operating inside knob/lever. Auxiliary latch deadlocks latch bolt
when door is closed. Inside knob/lever always free for immediate use.
MA571 F13 Dormitory or Exit LockLatch bolt operated by knob/lever from either side. Dead bolt projected by key from
outside and turn from inside. Operating inside knob/lever retracts both bolts and
unlocks outside.
21
23
24
25
MA581 F07 Storeroom LockLatch bolt operated by key from outside or by operating inside knob/lever. Otuside
6 • Falcon • MA-Series service manual
knob/lever is always inoperative. Auxiliary dead latch.
26
Introduction
MA621 F08/F10 Front Door/Apartment
Corridor
MA641 - Dormitory LockLatch bolt by knob/lever inside and key outside. Inside knob/lever free. Outside
MA851 - Storeroom - Fail Safe (EL),
with or without RX
MA881 - Storeroom - Fail Secure (EU),
with or without RX
MA911 F29 Classroom DeadlockKey from outside operates deadbolt. Turn from inside retracts but does not project
Latch bolt is operated by knob/lever from either side except when outside knob/
lever is made inoperative by buttons in face. Dead bolt is operated by turn inside.
Key outside operates both bolts.
knob/lever rigid. Dead bolt by key outside or T-turn inside. Rotating inside knob/
lever retracts both bolts. Deadlocking latch.
Latch bolt operated by knob/lever from either side except when outer knob/lever is
electrically locked. When outer knob/lever is locked latch bolt retracted by key in
cylinder outside. Deadlocking latch.
Latch bolt operated by knob/lever from either side except when outer knob/lever is
electrically unlocked, then latch bolt from either side. When locked key in cylinder
outside retracts latch bolt. Deadlocking latch.
dead bolt.
27
28
29
30
31
MA921 F18 DeadlockDeadbolt by key outside only.32
MA931 F16 DeadlockDeadbolt by key from either side.33
MA941 F17 DeadlockDeadbolt by key outside or turn inside.34
S76300#8-32 x Z⁄v” L Machine Screw1³⁄,”-1M⁄,” door
#12-12/ #12-24 x 1Z⁄x” L Wood/machine
Combination Screw
#12-12/ #12-24 x 1Z⁄v” L Wood/machine
Combination Screw
#8-32 x 1Z⁄v” L Mounting Screw
ø Z⁄v” x 1ZZ⁄zn” L Post
B⁄zn” x 1>⁄zn” L x 2 pcs STD Sindle Assembly
³⁄cx” Allen Wrench
thickness,
sectional trim
with levers
Part No.DescriptionUse
S76301#8-32 x Z⁄v” L Machine ScrewOver 1M⁄,”-2Z⁄x”
#12-12/ #12-24 x 1Z⁄x” L Wood/machine
Combination Screw
#12-12/ #12-24 x 1Z⁄v” L Wood/machine
Combination Screw
#8-32 x 1Z⁄x” L Mounting Screw
ø Z⁄v” x 2Z⁄v” L Post
B⁄zn” x 1M⁄,” L x 2 pcs EXT Sindle Assembly
³⁄cx” Allen Wrench
door thickness,
sectional trim
with levers
Falcon • MA-Series service manual • 37
Parts and Accessories
Part No.DescriptionUse
S76302#8-32 x Z⁄v” L Machine Screw1³⁄,”-1M⁄,” door
#12-12/ #12-24 x 1Z⁄x” L Wood/machine
Combination Screw
#12-12/ #12-24 x 1Z⁄v” L Wood/machine
Combination Screw
#8-32 x 1Z⁄v” L Mounting Screw
ø Z⁄v” x 1ZZ⁄zn” L Post
B⁄zn” x 1Z⁄v” L x 2 pcs STD Sindle Assembly
³⁄cx” Allen Wrench
S76303#8-32 x Z⁄v” L Machine ScrewOver 1M⁄,”-2Z⁄x”
#12-12/ #12-24 x 1Z⁄x” L Wood/machine
Combination Screw
#12-12/ #12-24 x 1Z⁄v” L Wood/machine
Combination Screw
#8-32 x 1Z⁄x” L Mounting Screw
ø Z⁄v” x 2Z⁄v” L Post
B⁄zn” x 1>⁄zn” L x 2 pcs EXT Sindle Assembly
³⁄cx” Allen Wrench
S76306#8-32 x Z⁄v” L Torx Head Machine ScrewTorx screw
#12-12/ #12-24 x 1Z⁄x” L Torx Head Wood/
machine Combination Screw
S76307#8-32 x Z⁄v” L Torx Head Machine ScrewTorx screw
#12-12/ #12-24 x 1Z⁄x” L Torx Head Wood/
machine Combination Screw
#6 x Z⁄x” Torx Head Sheet Metal Screw
S76331#8-32 x Z⁄v” L Machine ScrewSingle Dummy
#12-12/ #12-24 x 1Z⁄x” L Wood/machine
Combination Screw
#12-12/ #12-24 x 1Z⁄v” L Wood/machine
Combination Screw
#8-32 x 1Z⁄v” L Mounting Screw
B⁄zn” x 1>⁄zn” L STD Spindle
ø 0.027” Wire, OD; ø B⁄zn” x 1³⁄,” L Spring
³⁄cx” Allen Wrench
E77300#8-32 x Z⁄v” L Machine Screw1³⁄,”-1M⁄,” door
#12-12/ #12-24 x 1Z⁄x” Wood/machine
Combination Screw
#12-12/ #12-24 x 1Z⁄v” L Wood/machine
Combination Screw
#8-32 x 1Z⁄v” L Mounting Screw
ø Z⁄v” x 1ZZ⁄zn” L Post
B⁄zn” x 1>⁄zn” L x 2 pcs STD Sindle Assembly
#10-24 x 1Z⁄v” Machine Screw
³⁄cx” Allen Wrench
E77301#8-32 x Z⁄v” L Machine ScrewOver 1M⁄,”-2Z⁄x”
#12-12/ #12-24 x 1Z⁄x” L Wood/machine
Combination Screw
#12-12/ #12-24 x 1Z⁄v” L Wood/machine
Combination Screw
#8-32 x 1Z⁄x” L Mounting Screw
ø Z⁄v” x 2Z⁄v” L Post
B⁄zn” x 1M⁄,” L x 2 pcs EXT Sindle Assembly
#10-24 x 2” Machine Screw
³⁄cx” Allen Wrench
thickness,
sectional trim
with knobs
door thickness,
sectional trim
with knobs
pack, sectional
trim, no turn
pack, sectional
trim, with turn
Screw Pack
thickness,
escutcheon
trim with levers
door thickness,
escutcheon
trim with levers
Part No.DescriptionUse
E77302#8-32 x Z⁄v” L Machine Screw1³⁄,”-1M⁄,” door
#12-12/#12-24 x 1Z⁄x” L Wood/machine
Combination Screw
#12-12/#12-24 x 1Z⁄v” L Wood/machine
Combination Screw
#8-32 x 1Z⁄v” L Mounting Screw
ø Z⁄v” x 1ZZ⁄zn” L Post
B⁄zn” x 1Z⁄v” L x 2 pcs STD Knob Spindle
Assembly
#10-24 x 1Z⁄v” L Machine Screw
³⁄cx” Allen Wrench
E77303#8-32 x Z⁄v” L Machine ScrewOver 1M⁄,”-2Z⁄x”
#12-12/#12-24 x 1Z⁄x” L Wood/machine
Combination Screw
#12-12/#12-24 x 1Z⁄v” L Wood/machine
Combination Screw
#8-32 x 1Z⁄x” L Trim Screw
ø Z⁄v” x 1ZZ⁄zn” L Post
B⁄zn” x 1>⁄zn” L x 2 pcs EXT Spindle Assembly
#10-24 x 2” L Machine Screw
³⁄cx” Allen Wrench
E77306#8-32 x Z⁄v” L Torx Head Machine Screw1³⁄,”-1M⁄,” Thick
#12-12/#12-24 x 1Z⁄x” L Torx Head Wood/
machine Combination Screw
#10-24 x 1Z⁄v” L Torx Head, Machine Screw
E77307#8-32 x Z⁄v” L Torx Head Machine ScrewOver 1M⁄,”-2Z⁄x”
#12-12/#12-24 x 1Z⁄x” L Torx Head Wood/
machine Combination Screw
#10-24 x 2” L Torx Head Machine Screw
E77308#8-32 x Z⁄v” L Torx Head Machine ScrewTorx screw
#12-12/#12-24 x 1Z⁄x” L Torx Head Wood/
machine Screw
#10-24/#10 x 1Z⁄v” L Torx Head Wood/
machine Screw
E77331#8-32 x Z⁄v” LMachine ScrewScrew pack,
#12-12/#12-24 x 1Z⁄x” L Wood/machine
Combination Screw
#12-12/#12-24 x 1Z⁄v” L Wood/machine
Combination Screw
#8-32 x 1Z⁄v” L Mounting Screw
B⁄zn” x 1>⁄zn” L STD Spindle
#10-24/#10 x 1Z⁄v” L Wood/machine
Combination Screw
ø 0.027 Wire, ø B⁄zn” O.D. x 1³⁄,” L Spring
³⁄cx” Allen Wrench
Available in finishes 606, 613, 630
Non torx screw packs contain armor front screws, strike screws, trim
screws, mortise screws, spindle, mounting posts
Torx screw packs contain armor front, strike, and trim screws only
thickness,
escutcheon
trim with knobs
door thickness,
escutcheon
trim with knobs
Torx screw
pack,
escutcheon
trim, standard
door thickness
Thick Torx
screw pack,
escutcheon
trim, extended
door thickness
pack, rose
escutcheon
connection
door
escutcheon
connecting
door
38 • Falcon • MA-Series service manual
Parts and Accessories
Cams
Cams for Falcon cylinders
The Falcon MA Series requires a different cam for keyed functions than its predecessor, the Falcon M Series. For all keyed
functions except the MA381 function, the MA Series uses a single cam for all standard mortise cylinders and a single cam for
all interchangeable core mortise cylinders. The chart below lists the cam required.
Door handing Cam part numberOutsideInsideFor cylinder
The new Falcon MA Series MA381 function uses unique cams to operate the lock.
Different cams are required, depending on the handing of the lock. The charts on the
next page indicate which cams are to be used for each configuration.
Cams for Schlage cylinders
The Schlage Classic cylinders (C, E, and CE keyways) will also operate the Falcon MA
Series locks using the 5622-STD cam.
MA371, MA411, MA431,
MA441, MA931
MA371, MA411, MA431,
MA441, MA931
5622-STD
Standard
Interchangeable
core
5622-IC
Falcon MA381 cylinder cam configuration chart
Door handinside cyl. camOutisde cyl. cam
RH/RHR5620-STD (R3)5621-STD (R4)
LH/LHR5620-STD (L3)5621-STD (L4)
Falcon MA381 cylinder cam configuration chart
(interchangeable core)
Door handinside cyl. camOutisde cyl. cam
RH/RHR5620-IC (R3)5621-IC (R4)
LH/LHR5620-IC (L3)5621-IC (L4)
LH/LHRLH/LHR IC
Inside (L3)
Outside (L4)
Inside (L3)
Outside (L4)
RH/RHRRH/RHR IC
Inside (R3)
Outside (R4)
Inside (R3)
Outside (R4)
Complete cylinders can also be ordered for the MA381 function that will include the correct cam (the door hand must be
specified when ordering cylinders for the MA381).
Falcon • MA-Series service manual • 39
Parts and Accessories
Mortise, rim and cam lock for standard cylinders
Mortise Cylinder
900 Series Cylinders are furnished
with #4 straight cam and 250
Series with #1 cloverleaf cam
unless otherwise specified.
See table for product numbers.
See page page 39 for optional
cams and page 42 for collars.
Specify part number and finish when ordering. (e.g. A08790-000-626)
Function985
1Z\,”
986
1Z\v”
(C) 987
1C\,”
(C) 988
1Z\x”
Falcon • MA-Series service manual • 41
Parts and Accessories
Trim Rings & Collars
Dim. ADim. BPart No.
³⁄cx”>⁄cx”A08790-000
A
B
B
A
Blocking Rings
M⁄cx”1³⁄cx”A08790-001
ZZ⁄cx”1M⁄cx”A08790-002
ZB⁄cx”XZ⁄cx”A08790-003
V³⁄nv”BB⁄nv”A08790-004
³⁄cx”>⁄cx”A08794-000
M⁄cx”1³⁄cx”A08794-001
A
ZZ⁄cx”1M⁄cx”A08794-002
ZB⁄cx”XZ⁄cx”A08794-003
Z⁄,”-008876-000
³⁄zn”-008876-005
Z⁄v”-008876-001
³⁄,”-008876-002
Z⁄x”-008876-003
B⁄,”-008876-004
Wave washer included.
To order separately,
specify 008789-001-60.
Specify part number and finish when ordering. (e.g. A08790-000-626)
42 • Falcon • MA-Series service manual
Ordering Procedures
Ordering Procedures
For correct ordering, and to ensure no delays in shipment of your order, the following descriptive data must be listed in the
sequence shown. Necessary information can be found in other parts of this manual. The example below shows an order for
16 each MA locksets in the 521 Entry function, DG (Dane-Gala) trim design in a 626 (satin chrome) finish, 8 RH (right hand)
and 8 LH (le hand) to accommodate doors 1³⁄v” thick with AA1-AA16 keying.
Quantity: Indicate the quantity required.
Catalog Number: Select catalog number.
Trim Design: Indicate letter of knob or lever design followed
by letter of rose or escutcheon design.
Example: DG-D for Dane lever followed by G for Gala rose.
Finish: When the finish is the same for the outside and
inside trim, it is shown once (626). For split finishes, the
outside is designated first, then the inside (626 x 625).
Latch: Two-piece mechanical anti-friction standard. All
catalog numbers shown in this manual indicated 2³⁄v”
backset.
Strike: 4M⁄,” x 1Z⁄v” x 1Z⁄v” lip-to-center with curved lip
standard. Optional strikes with shorter or longer lip lengths
available.
Cylinder Type: For 6-Pin, add 6-Pin. For 7-Pin, add 7-Pin.
Door Hand: See chart.
Keying Detail: We suggest using the standard terms
Interchangeable Core: To order product capable of
accepting an interchangeable core, add “B” less SFIC (for
interchangeable core). To order product with an
interchangeable core, add “SFIC” (with interchangeable
core). Ex: “G” with Falcon SFIC core.
Keyway: “G” is standard on regular cylinders, “A” is standard
on interchangeable cores. Other keyways available. See
price book.
Additional Keys: Note the total number of keys required.
Large Bow Keys: Add - “with large bow keys”.
Example
Qty.Catalog
Number
8MA521PDG626STDSTD6-PINXAA1-AA8 1³⁄v” DR
8MA521PDG626STDSTD6-PINXAA9-AA16 1³⁄v” DR
Finishes
Falcon offers several finish choices to compliment the
design elements of most any project. Falcon applies the
best available protective plating or coating to the surface of
our products to minimize the exposure to weather, pollution,
perspiration, extremes of climate, frequency of us and other
factors. Please consult with us if your building is subjected
to chemical or corrosive conditions, as some finishes would
not be recommended for these areas. Falcon recommends
chrome plated or stainless steel finishes for high corrosive
environments.
Trim Finishes
DescriptionANSI No.Available on
Bright Brass605US 3All trim
Satin Brass606US 4All trim
Satin Bronze Oil Rubbed613US 10BAll trim
Bright Chrome625US 26All trim
Satin Chrome626US 26DAll trim
Satin Stainless Steel630US 32DAll trim
Trim
Design
FinishLatchStrikeCylinderDoor HandDetail
RHLHRHRLHR
Door Handing
Falcon • MA-Series service manual • 43
About Allegion
Allegion (NYSE: ALLE) creates peace of mind by pioneering safety and security.
As a $2 billion provider of security solutions for homes and businesses, Allegion
employs more than 7,800 people and sells products in more than 120 countries
across the world. Allegion comprises 23 global brands, including strategic
brands CISA®, Interflex®, LCN®, Schlage® and Von Duprin®.