Allegion LCN 4040 Super Smooth Flexible Heavy Duty Closer User Manual

DESIGNER METAL

PLASTIC

METAL

HINGE (PULL) SIDE

TOP JAMB (PULL)

TOP JAMB (PUSH)

PAR

ALLEL ARM

STOP FACE

MOUNTING

COVER

120° 120°

180°

110°

110°

STANDARD (

SINGLE)

REGULAR (DOUBL

E)

HOLD-OPEN

FUSIBLE LINK

EDA/HEDA

CUSH/HCUSH

SCUSH/SHCU

SH

**ARM FUNCTION

FINISH

CYLINDER

NON-HANDED

NON-SIZED

ACCESSIBILITY

DELAYED A

CTION

AVB

***

XP

POWDER COAT

PLATED

CLOSER MOUNTS

For

XP

See

P.

40

*HINGE (PULL) SIDE

TOP JAMB (PUSH SIDE)

PARALLEL ARM (PUSH SIDE)

LCN 4040 SERIES

The 4040 SUPER SMOOTHEE® is

LCN’s most flexible heavy duty

closer designed for institutional

and other rugged high traffic

applications.

Ten Million Cycles

Cast Iron

Forged Steel Arm

Double Heat Treated Steel

Pinion

All Weather Fluid

Non-Handed

FEATURES

*HINGE (pull) side mount shown

Standard 4040 series closer shipped with regular arm, standard plastic

cover, and self reaming and tapping screws. See 4040 Series pages
45-47 for options.

Non-sized cylinder is adjustable for interior doors to 5’0” and exterior

doors to 4’0”.

Closer mounts hinge side, top jamb, and parallel arm w/PA Shoe on

either right or left swinging doors.
Closers to meet ADA requirements. See 4040 Series page 48.
Standard or optional custom powder coat finish.
Optional plated finish on cover, arm, and fasteners.
Optional SRI primer for installations in corrosive conditions.
Optional designer series metal cover
UL and cUL listed for self-closing doors without hold-open.

ested and certified under ANSI Standard A156.4, grade one.

T

® Fast™ Power Adjust

LCN

Fast & Accurate Installation

UL & cUL Listed

The 4040 Series includes the

LCN® FAST™ Power Adjust,

a revolutionary visual indicator

for Spring Power Adjustment.

Available
Not available

Closer available with less than 5.0 lbs. opening force on 36" door.

**Maximum opening/hold-open point with standard template.

*** Advanced Variable Backcheck

39

LCN CLOSERS
121 W. RAILROAD AVE.
P.O. BOX 100
PRINCETON, IL, USA 61356-0100

PHONE [phone]
FAX [phone]
www.lcn.ingersollrand.com
3/07

LCN 4040 SERIES

DESIGNER METAL

PLASTIC

METAL

HINGE (PULL) SIDE

TOP JAMB (PULL)

TOP JAMB (PUSH)

PAR

ALLEL ARM

STOP FACE

MOUNTING

COVER

120° 120°

180°

110°

110°

STANDARD (

SINGLE)

REGULAR (DOUBL

E)

HOLD-OPEN

FUSIBLE LINK

EDA/HEDA

CUSH/HCUSH

SCUSH/SHCU

SH

**ARM FUNCTION

FINISH

CYLINDER

NON-HANDED

NON-SIZED

ACCESSIBILITY

DELAYED A

CTION

AVB

***

XP

POWDER COAT

PLATED

New 4040XP

The new 4040XP is LCN’s most durable heavy duty
closer designed for the most demanding, high use

FEATURES

NEW 4040XP closer shipped with EDA arm, standard

plastic cover, and self reaming and tapping screws.
Non-sized cylinder is adjustable for interior doors to 5’0” and

exterior doors to 4’0”.
Closer mounts parallel arm (EDA arm) on either right or left

swinging doors.

Optional hinge side and top jamb mount with optional regular arm.

Closers to meet ADA requirements. See 4040XP Series page 49.
Standard or optional custom powder coat finish.

Optional plated finish on metal cover, arm and fasteners.
Optional SRI primer for installations in corrosive conditions is

available with powder coat only.
Optional designer series metal cover
UL and cUL listed for self-closing doors without hold-open.

4040XP can be used with all 4041 accessories. See pages 45-

47 for options.

and abuse applications.

44% increased bearing load capacity
Strongest pinion ever- at 3/4” journal diameter
Widest bearing ever- at 5/8”
Stronger pinion teeth
New V-shield™ seal with 20% longer life
XP = eXtra Protection in real world applications

Cast Iron
Forged Steel Arm
Double Heat Treated Steel Pinion
All Weather Fluid
Non-Handed
LCN

®

Fast™ Power Adjust
Fast & Accurate Installation
UL & cUL Listed
Tested and certified under ANSI Standard A156.4,

grade one

The 4040 Series includes the

LCN® FAST™ Power Adjust,

a revolutionary visual indicator

for Spring Power Adjustment.

Available
Not available

Closer available with less than 5.0 lbs. opening force on 36" door.

**Maximum opening/hold-open point with standard template.

*** Advanced Variable Backcheck

40

LCN CLOSERS
121 W. RAILROAD AVE.
P.O. BOX 100
PRINCETON, IL, USA 61356-0100

PHONE [phone]
FAX [phone]
www.lcn.ingersollrand.com
3/07

LCN 4040 SERIES

HINGE (PULL) SIDE
MOUNTING

MAXIMUM OPENING

Templating allows up to 120°.

Hold-open points 90° up to 120° with
hold-open arm.

Optional, Non-handed

Designer Series

Metal Cover

MOUNTING DETAILS

Options

4040XP cylinder
4041 Delayed action cylinder.
Hold-open arm.
Metal or lead lined cover.
Corner bracket.
Designer Series metal cover.

Special Templates

Customized installation templates
or products may be available to
solve unusual applications.
Contact LCN for assistance.

Butt Hinges should not exceed 5” (127 mm) in width.

Auxiliary Stop is recommended at hold-open point or where a door

cannot swing beyond 120

Reveal should not exceed 3/4” (19 mm) for regular arm or hold-open arm.

Top Rail less than 3 3/4” (95 mm) requires PLATE, 4040-18.

Plate requires 2” (51 mm) minimum. With Designer Series metal cover,
use PLATE, 4040-18DS1

Clearance of 2 3/8” (60 mm) behind door required for 90° installation.
2 7/8” (73 mm) for Designer Series metal covers

Delayed Action (not available on 4040XP) Add suffix “DEL” to selected
cylinder (eg. 4041 DEL). Delays closing from 120° to 70°.
Delay time adjustable up to approximately 1 minute.

Bull Nose Trim requires SOFFIT SHOE, 4040-65.

Corner Bracket available for doors where top jamb or parallel arm

mounting can not be used.
4040-16 allows 110° opening. Projects 5” (127 mm) from stop, 12 13/16”
(325 mm) from frame.
4040-17 allows 100° opening with certain auxiliary door holders (consult
factory). Projects 6 3/8” (162 mm) from stop, 13 11/16” (348 mm)
from frame.

41

°.

LCN CLOSERS
121 W. RAILROAD AVE.
P.O. BOX 100
PRINCETON, IL, USA 61356-0100

PHONE [phone]
FAX [phone]
www.lcn.ingersollrand.com
3/07

LCN 4040 SERIES

TOP JAMB (PUSH SIDE)
MOUNTING

MAXIMUM OPENING

Templating allows up to 120°.

Hold-open points 85° up to 120° with

MOUNTING DETAILS

hold-open arm.

Optional, Non-handed

Designer Series

Metal Cover

Butt Hinges should not exceed 5” (127 mm) in width.

Auxiliary Stop is recommended at hold-open point or where the

door cannot swing 120

Reveal of 2 9/16” (65 mm) allows 120
standard HOLD-OPEN ARM. 4 13/16” (122 mm) allows up to 120°
opening with LONG ARM where standard rod and shoe is replaced
with optional LONG ROD AND SHOE 4040-79LR. Use H-LONG ARM
with LONG HEAD AND TUBE, 4040-78HL for hold-open. 8” (203 mm)
allows up to 120° opening with EXTRA LONG ARM where standard
rod and shoe is replaced with optional EXTRA LONG ROD AND SHOE,
4040-79ELR.

Top Rail requires 1 1/4" (32 mm) minimum.
2 1/4" (57 mm) minimum with closer on PLA
3" (76 mm) minimum with closer on PLATE, 4040-18G. With Designer
Series metal cover

Head Frame less than 3 1/2” (89 mm) requires PLA
With flush ceiling, use PLATE, 4040-18G.
Either plate requires 1 3/4” (44 mm) minimum.

Delayed Action (not available on 4040XP) Add suffix “DEL” to
selected cylinder (eg. 4041 DEL). Delays closing from 120
Delay time adjustable up to approximately 1 minute.

°.

, use PLA

opening for REGULAR ARM or

°

TE, 4040-18TJ.

TE, 4040-18TJDS1

TE, 4040-18TJ.

°.

to 80

°

42

Options

4040XP cylinder
4041Delayed action cylinder.
Long arm, extra long arm, hold­open arm, long hold-open arm.
Metal or lead lined cover.
Designer Series metal cover.

Special Templates

Customized installation templates
or products may be available to
solve unusual applications.
Contact LCN for assistance.

LCN CLOSERS
121 W. RAILROAD AVE.
P.O. BOX 100
PRINCETON, IL, USA 61356-0100

PHONE [phone]
FAX [phone]
www.lcn.ingersollrand.com
3/07