Allegion ECO-ETS73, ECO-ETS64-R Datasheet
ETS Series
Swing Door Operators
Features
The ECO ETS has a powerful electromotive drive that safely
and silently opens and closes door leaves up to 250kg in
weight, and up to 1600mm in width. This provides secure
automation for external doors that may experience strong
wind loads, and also for heavy fire protection doors.
Quiet and ecient
The ETS is extremely quiet and has a well engineered and
harmonious movement. It is these properties that make
the ETS such an effective all-rounder for public buildings,
hospitals, clinics and aged care facilities.
Fire and smoke protection
The ETS model ETS 64-R is approved as a hold-open device
for fire and smoke protection doors. In combination with a
lintel switch, it triggers the fire protection closer in the case
of a smoke activated alarm or power failure.
The Inverse function has been specially developed for
smoke extraction from buildings. The fire/smoke protection
function is reversed when the alarm is triggered, and the
door is opened by spring force to enable smoke extraction.
The feature will still be activated during a power cut, so an
emergency power supply is not necessary.
Simple assembly, operation and service
The ETS has a simple, user-friendly settings menu. This is
controlled via the LCD display panel and joystick function on
the control board.
Illuminated keys on the end caps allow easy access to
the Auto/Night/Manual/Hold Open/Exit functions so that
approved personnel can manage the device as required. The
operation of the device is also password protected.
Low Energy and Full Power settings
The ETS can be set for both Low Energy and Full Power
functions on site using the same drive - an additional
upgrade card is not necessary. The Full Power setting enables
automation for heavy doors that are used frequently and
require fast opening and closing sequences.
The Low Energy setting (only 4W on standby) has been
developed for private households, oces and work areas
where doors are used less frequently.
The starting power and closing power are also adjustable
for both Low Energy and Full Power settings, and there is an
adjustable start delay setting for the closing sequence.
Wind load compensation
The wind load control is there to smooth the operation of the
outer doors in different air pressure conditions right up to Wind
Force 9. A briefly occurring increased wind load (e.g. a strong
gust) is also recognised by the drive.
The control calculates the additional motor performance for
amplifying or reducing the drive, enabling the door to operate
effectively in a wide range of conditions.
Push + Go
Push + Go is a feature which if selected allows the door to
automatically open when it detects users pushing the door
manually.
April 2018
Specifications
ECO-ETS73 ECO-ETS64-R
Closing force Size according to EN, continuously adjustable 3-7 4-6
Door width Doors up to 1600mm Yes -
Size according to EN
Doors up to 1400mm - Yes
Dimensions Length (mm) 689 689
Including mounting plate
Depth (mm) 120 (130)* 120 (130)*
Height (mm) 95 95
Ambient temperature Celcius -15° to +50° -15° to +50°
Relative humidity Maximum 85% Maximum 85%
Maximum Power consumption 560W (4W standby) 560W (4W standby)
Non-handed Ye s Ye s
Maximum opening speed adjustable 40° per second 40° per second
Maximum closing speed Adjustable (fixed if there is a power failure) 40° per second 40° per second
Hold-open time adjustable 0-60 seconds 0-60 seconds
Max. door opening angle 105° 105°
Suitable for fire and smoke control doors Yes Yes**
* 130mm with mounting plate ** includes integrated smoke detector and three fire relays
Accreditations
Fire rated
Successfully tested on fire doorset to AS 1530.4
Electromagnetic compatibility
Meets EN 61000-6-1 (emission) EN 61000-6-2 (immunity) standards
Accessories
Slide Rail Arm (ECO-ETS-SLIDERAIL)
Provides an automated push action when
positioned opposite the hinge side of the door,
and an automated pull action when positioned
on the hinge side of the door.
Standard Arm (ECO-ETS-ARM)
Provides an automated push action when
positioned opposite the hinge side of the door.
Mounting Plate for ETS (ECO -ETS-MP
The mounting plate provides additional fire
protection and/or fixing strength when used on
walls or narrow frame facings.
Open Stop for ETS (ECO- ETS-ST OP)
Mounted on the power unit to provide additional
mechanical open stop where required.
Push Plate Actuator (LCP25136)
Mounted on the power unit to provide additional
mechanical open stop where required.
Activation Sensor (ECO-ETS-ACTIVATION)
A radar motion detector which provides an
opening impulse for the ETS.
Safety Sensor (ECO -ETS-SAFETY)
An active infrared safety sensor for automatic
doors. Secures the movement area and stops or
reverses when obstacles are detected.
Continuous Cladding for Double Leaf Doors
(ECO-ETS-DOUBLE)
Provides a seamless stainless steel look across
the top of the header frame when two power
operators are installed above double doors.
Suitable for openings up to 2.6m wide.
April 2018
Loading...