Cordless Hand Blender / Licuadora de inmersión inalámbrica
Owner’s Guide / Guía del usuario - KZ800D51
Read and save these instructions - Lea y conserve estas instrucciones
www.allclad.com
EN
ES
TABLE OF CONTENTS
IMPORTANT SAFEGUARDS....................................................................................................................... pg. 3
DISPOSING OF YOUR APPLIANCE ......................................................................................................... pg. 6
DESCRIPTION OF PARTS ............................................................................................................................ pg. 8
USING YOUR IMMERSION BLENDER ................................................................................................... pg. 9
When using electrical appliances, basic safety precautions should always be followed, including the following:
1. Read all instructions.
2. is appliance complies with applicable technical rules and standards at time of manufacture.
3. is appliance is designed to run only on alternating current. To avoid injury, damage to the appliance, and
voiding of the warranty, always check before rst use that the power supply corresponds to that indicated on the
appliance’s rating plate.
CAUTION: BLADES ARE EXTREMELY SHARP. Avoid contact with moving parts during use.
Neverhandle the blender shaft blades when the appliance is plugged in, even if the power is not on.
4. To protect against risk of electrical shock, do not immerse the blender body or charger base into water or any
other liquid.
5. Always unplug the charger base:
- if it is not working correctly,
- before assembly, disassembly, cleaning or maintenance,
- after each use.
6. Do not place or use this appliance on a hot plate or close to a ame (gas cooktop).
7. Never use the appliance if:
- it has been dropped,
- it shows signs of damage or is missing parts,
- the power cord shows signs of damage.
8. Do not operate any appliance with a damaged cord or plug or after the appliance malfunctions or is dropped or
damaged in any manner. Return appliance to the nearest authorized service facility for examination, repair or
electrical or mechanical adjustment.
9. To unplug, grasp the plug and pull from the outlet. Never pull from the power cord.
10. Do not let the power cord hang over edge of table or counter.
EN
3
11. Do not let the power cord contact hot surface, including the stove.
12. is appliance has a polarized plug (one blade is wider than the other). To reduce the risk of electric shock, this
plug is intended to t into a polarized outlet only one way. If the plug does not t fully into the outlet, reverse
the plug. If it still does not t, contact a qualied electrician. Do not attempt to modify the plug in any way.
13. Turn the appliance OFF, then unplug from the outlet when not in use, before assembling or disassembling parts
and before cleaning.
14. Do not disassemble the appliance except for cleaning and ordinary maintenance.
15. For all other repairs, contact an authorized service center.
16. e use of attachments not recommended or sold by the manufacturer may cause re, electric shock or injury.
17. is appliance has been designed for household use only. In case of any commercial use, inappropriate use or failure to
comply with the instructions, the manufacturer accepts no responsibility and the guarantee will not apply.
18. is appliance should not be used by children and care should be taken when used near children.
19. Be sure to watch over children to ensure that they do not play with the appliance.
20. Do not use outdoors.
21. When mixing liquids, use a tall container or blend smaller quantities to avoid splashing.
22. Use care when blending hot liquids.
23. Keep hands and utensils out of containers while blending to avoid severe injury or damage to the appliance. A
spatula may be used to scrape down the sides, but only after the blender is removed from the container.
24. Blades are sharp. Handle carefully.
25. Do not use an extension cord. Plug charger directly into an electrical outlet.
26. Do not charge batteries with charger plugged into an outdoor outlet.
27. Unplug the charger from the outlet before attempting any routine cleaning of the charger.
28. Do not operate a damaged charger. Have damaged charger replaced immediately.
29. Do not incinerate the hand blender, even if it is severely damaged. e batteries can explode in a re.
30. is appliance contains lithium-ion batteries which must be recycled at the end of the life of the hand blender
and disposed of properly. (See Disposal/Recycling of Batteries, page 6.) Do not incinerate or compost batteries,
as they will explode at high temperature.
4
31. Prevent unintentional starting. Never Unlock the safety switch on the blender body unless you are ready to use
your blender.
32. Recharge only with the charger specied by the manufacturer. A charger that is suitable for one type of battery
pack may create a risk of re when used with another battery pack.
33. Under abusive conditions, liquid may be ejected from the battery. Avoid contact with such liquid. If contact
accidentally occurs, ush with water. If liquid contacts eyes, seek medical help. Liquid ejected from the battery
may cause irritation or burns.
34. Do not replace a battery pack or appliance that is damaged or modied. Damaged or modied batteries may
exhibit unpredictable behavior resulting in re, explosion or risk of injury.
35. Do not expose a battery pack or appliance to re or excessive heat. Exposure to re or temperatures above
265°F/130°C may cause an explosion.
36. Have service performed by a qualied repair person using only identical replacement parts. is will ensure that
the safety of the appliance is maintained.
37. Recommended ambient charging temperature 50°F−104°F (10°C− 40°C).
38. Recommended storage temperature 50°F− 104°F (10°C− 40°C).
39. Use only the power adapter supplied with this appliance.
FOR HOUSEHOLD USE ONLY
SAVE THESE INSTRUCTIONS
EN
5
DISPOSING OF YOUR APPLIANCE
Your appliance contains many materials which can be recycled.
Consult your local waste collection agency for information on how to properly dispose of your
appliance.
Always dispose of your battery pack according to federal, state, and local regulations. Contact a
recycling agency in your area for recycling locations.
Even discharged battery packs contain some energy. Before disposing, use electrical tape to cover
the terminals to prevent the battery pack from shorting, which could cause a re or explosion.
6
CONGRATULATIONS ON YOUR
PURCHASE
All-Clad Metalcrafters created the original collection of professional cookware made with a patented metal bonding
process which eliminates uneven heating, an accomplishment that led to All-Clad becoming the product chosen
for the kitchens of more four-star restaurants than any other. Still the only complete line of cookware made by an
American company with materials produced in its own mill, All-Clad has revolutionized the art of cooking since its
introduction.
With ve professional cookware collections featuring a variety of bonded metals and nishes, from high grade
aluminum and stainless steel to copper, All-Clad combines professional design with high performance for all tastes
and cooking styles.
e All-Clad cooking experience now extends to a focused selection of small electrical appliances, each designed
without compromise to make a noticeable dierence in both use and performance. Cooking connoisseurs now have
a wonderful opportunity to complete their kitchen with electrics by All-Clad, the undisputed original.
All-Clad Metalcrafters has an ongoing policy of research and development and may modify its products without
prior notice.
EN
7
DESCRIPTION OF PARTS
a. SAFETY LOCK Button
b. Indicator Light
c. Speed Selection Dial
d. Blender Body
ab
e
e. POWER Button
f. Detachable Shaft
g. Charging Base
c
d
f
g
8
USING YOUR IMMERSION BLENDER
Before rst use, carefully wipe clean and dry all parts. Refer to the CLEANING section.
Charging your blender/ Battery Life
1. e battery in your All CLAD Cordless Hand Blender has not been fully charged. Before the rst use of this
appliance, the battery must be charged until the BLUE battery indicator light illuminates. With a full charge, your
stick blender will run for approximately 6-9 minutes, depending on load. Your stick blender will be fully charged in
approximately 2-2.5 hours. You can “quick charge” your stick blender for 3 minutes of run time in 30 minutes of charge.
2. Charging: When ashing RED, battery is in charging status; when BLUE Indicator light is on, your battery is
fully charged.
3. In operation mode: BLUE Indicator lights up.
4. When ashing slowly in BLUE, battery level between 24-10%. When ashing fast, battery level will go down to
9-1%, the unit does not operate when the light turns o.
5. Running out of battery: When no indication at all, you have zero battery power and need to charge.
When using the blender
1. Insert the blending shaft into the blender body and turn counter clock-wise to lock in
place. Use the line on the blender body and the icons on the blender shaft as a guide.
2. Set the desired speed from 1 to 5 by turning the speed selection dial. It is
recommended to set speed from the lowest power setting and gradually increase
it to the desired speed.
3. Immerse the blending shaft into the ingredients and cover the blade.
4. Press SAFETY LOCK button followed by holding on the POWER button
to begin blending, as illustrated. Only allow the blender shaft to be immersed in
food or liquid.
5. Slowly move the blender shaft up and down or in a circular motion to process
food evenly.
EN
9
Loading...
+ 19 hidden pages
You need points to download manuals.
1 point = 1 manual.
You can buy points or you can get point for every manual you upload.