ALK Technologies PC5 User Manual

Contents

Quick Start .......................................................................... i-xii

CoPilot Overview ..............................................................1

Safety Warning ................................................................... 2

What’s New in Version 5.0? .......................................... 2

Getting Started ................................................................. 3

Getting Started - Hardware........................................... 3

Getting Started - Get Connected ................................ 4

Uninstalling a Previous Version ..................................... 5

Installing CoPilot ............................................................... 6

Adding a Data Region....................................................... 9

Region Selection ............................................................... 10

Changing the Voice Option At Any Time...................... 10

Software Activation ..................................................... 11

Deactivation and License Update ........................ 12

Speech V olume ............................................................... 12

Data Download To Your Pocket PC

....................... 13

Step 1:Specify Where Data Is Stored ........................ 13

CoPilot QuickStart ........................................... 14

Step 2:Choose a Data Selection Method ................. 15

Step 3:Select Your Data ................................................. 17

City Radius .......................................................... 17

Map Area .............................................................. 19

Trip ........................................................................ 21

Step 4:Download the Data .......................................... 23

POI Download Options ................................................ 24

T rip T ransfer ..................................................................... 24

Importing Custom Places ............................................. 25

Using Your Pocket PC for Guidance ..................... 29

Address Entry ................................................................... 30

Start Driving! .................................................................... 32

Entering a Home Address .............................................. 33

Entering a Work Address ............................................... 33

Favorites ............................................................................. 34

Finding Points of Interest ............................................... 35

Intersection ....................................................................... 37

Contact Integration ......................................................... 38

Latitude/Longitude ........................................................... 39

Saved Trip ........................................................................... 40

Closing CoPilot ................................................................ 40

Driver Safety/Map/Itinerary Screens ........................... 41

Navigating Through CoPilot Screens ........................... 43

Customizing the Guidance Screens ............................. 43

Map Modes ........................................................................ 44

Trip Editing and Waypoints ............................................ 45

Getting ETA’s and Distances ......................................... 45

Picking Stops From the Map .......................................... 46

Optimizing Stops .............................................................. 46

Detour Feature ................................................................. 47

Selective Routing .............................................................. 48

Tools Menu Options ........................................................ 49

Modes Menu ...................................................................... 52

The GPS Menu .................................................................. 53

Open and Play GPS Tracks ............................................. 53

Save Current Location .................................................... 54

Options in the GPS Menu .............................................. 55

Reference:Screens & Toolbars on Your Pocket PC .. 58

Trip Planning

on Y our P ocket PC ............................. 63

Saving and Loading Trip Itineraries ............................... 64

Trip Planning on Your Desktop ................................ 65

Reference:CoPilot on Your Desktop .......................... 74

CoPilot Live Communications .................................... 79

CoPilot Live Web Page..................................................... 79

Live Mode Overview ........................................................80

Live Mode - Automatic Vehicle Location (AVL) ......... 81

Live Mode - Send/Receive Messages ............................ 81

Live Mode - Send Trip Itinerar y Updates .................... 83

Driving with Live - Pocket PC Setup ........................... 84

Driving with Live - Receive/Respond to Messages ... 87
Driving with Live - Receive Trip Itinerary Updates ... 88

About GPS Technology .................................................... 89

Data Corrections ................................................................ 90

Trouble-shooting ................................................................. 91

Using Help Files .................................................................. 92

Software Registration........................................................ 92

Technical Support .............................................................. 93

Return Policy ........................................................................ 94

License Agreement ............................................................ 95

1. Check the package contents

Your CoPilot package includes the following:

 Install/Data Discs
 Quick Start Guide and GPS Receiver Guide
 GPS Receiver (not in software-only packages)
 In-Vehicle Power Adapter (not in software-only packages)
 Vent Mount (not in software-only packages)

2. Uninstall any previous version

If you have a previous version of CoPilot installed on your Pocket PC and/or
desktop computer, you must uninstall it before updating. Make sure your
GPS receiver is NOT attached, then follow these steps:

(1) On your Pocket PC:

1. Tap the Start menu and select Settings > System > Remove Programs

2. Select the CoPilot application and tap Remove.

3. Select Pocket Speech and tap Remove.
4a.If you stored map data on a storage card:

i. Delete the CoPilot folder on the storage card. Tap Start, then Programs

> File Explorer > My Device > SD Card,then tap and hold on the CoPilot
folder and select Delete from the menu.

4b.If you stored map data on your device memory:

i. Delete the CoPilot folder on My Device.Tap Start, then Programs >

File Explorer > My Device,then tap and hold on the CoPilot folder and
select Delete from the menu.

(2) On your Desktop/Laptop computer:

1. Select Start menu > Settings > Control Panel.

2. Double-click Add/Remove Programs.

3. Select the CoPilot application and click on the Remove button.

4. If asked to confirm the removal of CoPilot and all of its
components,selectYes.

5. If asked to remove shared files during the uninstall process,select
No T o All.

6. Select Start > Searc h > Files or Folders and find the CoPilot folder.

7. Right-click the CoPilot folder and select Delete.

NOTE: Make sure no previous version of CoPilot is installed (see above).
Your desktop/laptop and Pocket PC should both be turned on. The cradle/cable

for your mobile device must be connected to your desktop through either a USB
or Serial port. Your Pocket PC should be connected to your desktop via
ActiveSync. If it is not, see the instructions that came with your Pocket PC.

If you plan to use a Storage Card Reader, it must be installed and connected to
your desktop. You can also use a PCMCIA adapter for the Storage Card if you
have a laptop

3. Install CoPilot

- ii -

- i -

Thank you for purchasing CoPilot! This Quick Start Guide details how to get
up and running. Here’s an overview of the process:

Uninstall previous versions of CoPilot.
Connect your Pocket PC to your desktop/laptop.
Install CoPilot to your desktop and Pocket PC using the

Product Key below.
On your desktop,create a map data region and download it

to your Pocket PC.
Activate CoPilot on your Pocket PC.
Enter an address and Start Driving!

Installation Steps:

Step 1: Insert the CoPilot Install Disc into your CD-ROM drive. Enter your

Product Key Code when prompted (you can find it on the cover of
your printed Quick Start). Click Next and follow the Installation
Wizard’s on-screen instructions.

When prompted,make sure Pocket PC Installation and Desktop
Installation are checked on the installation menu.

When prompted,choose a voice option. Text-to-speech provides
more detailed voice instructions,including road names.Pre-recorded
sound files are louder and crisper, but provide less detailed driving
instructions. The pre-recorded option saves space on your Pocket PC.

As CoPilot prepares to install to your mobile device, you will be asked
if the default location (the device’s main memor y) is where you want
the application to be placed. Recommended Option: To install to
a storage card,click No, then choose Storage card from the drop­down pick list. (To install to main memory,click Yes.)

Step 2: When CoPilot has been installed to your Pocket PC (this will take a

few minutes),you will be prompted to begin the desktop/laptop
installation. Click Next and follow the on-screen instructions.

Step 3: When the installation is complete,a CoPilot icon will appear on your

desktop. See Step 5, Activate the software,for software activation.
Navman GPS Jacket users: also see p.xi.

NOTE: CoPilot won’t open on your Pocket PC unless map data has
been downloaded first.

(1) Choose a Storage Location:

1.Open the CoPilot application on your desktop/laptop,then
click the Data Download Wizard icon in the sidebar on the left.
Make sure your Pocket PC is synchronized.

2. Choose where you would like data stored on the Pocket PC.
CoPilot will scan your computer to detect which options are
available. If you choose an option other than the device memory,

- iii - - iv -

4. Download map data

click the pick list that appears and select a storage card name or the
drive letter of your storage card reader. Click Next.

NOTE: If data is stored on the device's memory and also on a Storage
Card in the device,CoPilot will use the Storage Card by default. To have it
use map data on device memory,you must remove the Storage Card.

(2) Select a Data Area:

Select City Radius to create a data region of a specified radius around
a city of your choice:

1. In the City,State or ZIP Code box,type a City,State (e .g. new
york,ny) and press <Enter>.

2. Specify the Distance Around City to Download (e.g. 60) and
press <Enter>. Click Next.

3. Your selected data region will be displayed. A window will appear
showing how much space you have available on your selected
destination (see Choose a Storage Location above) and how much
memory this data region will take up. If necessary,adjust the radius
to make sure your data region will fit on your selected destination.
Click Next.

4. Give your data region a name and click Next.

5. You will then be given the option to either select additional map data
or download selected areas to your Pocket PC. Click Download.

(3) Download the Data:

1. Clicking the Download icon will take you to a screen where
Available Area(s) for download are displayed on the left.

2. To designate an area to include in the download,highlight it and then click
on the right arrow button to move it to the Data Included in This
Download list on the right. To take an area off the list,highlight it and
click the left arrow button.

3. After confirming that the area(s) you would like to download are in the
Data Included in This Download list, click Download to complete the
map data download process.

- v - - vi -

You will be asked to activate your new software when you open CoPilot on your
Pocket PC. Note that, unlike in previous versions,desktop activation is no
longer required. You can now open and use CoPilot’s desktop trip planning
software without activating it.

Keep your Pocket PC connected to your desktop and open CoPilot on your
Pocket PC. Follow the steps below to activate on your Pocket PC:

Automatic Activation

If your desktop is connected to the Internet you can automatically activate
CoPilot on your Pocket PC as follows:

1. Connect your Pocket PC to your desktop via ActiveSync.

2. Make sure your desktop has an active connection to the Internet

3. On your Pocket PC go to Start > Programs > CoPilot.

4. An activation screen will appear. Follow the on-screen instructions
and tap Next.

5. In the next screen, enter your e-mail address and tap Next. You will see
the message “License activated successfully” when the
process is finished. Tap Next to begin using CoPilot.

Manual Activation

1. Connect your Pocket PC to your desktop via ActiveSync.

2. Make sure your desktop has an active connection to the Internet

3. On your Pocket PC go to Start > Programs > CoPilot.

4. An activation screen will appear. Check Activate Manually and
tap Next.

5. The next screen is the Activation Code screen where you'll see your
Product Key and License ID. You'll need this information to manually
activate CoPilot as follows:

a. On your desktop visit ALK's activation web page

(http://activate

.alk.com)

i. On the ALK activation page enter your Product Key,

License ID and e-mail address,then tap Submit. Your
Activation Code will appear on-screen and an e-mail that
contains your Activation Code will be sent to you.

ii. Enter your Activation Code in the blank field in the

Activation Code screen and click Activate.

5. Activate the software

b. If you do not have internet access you can call,fax or e-mail ALK.

Technical support is available to registered users during standard busi­ness hours. See Contact Information, p.xi.

NOTE: Software activation does NOT register your software,they are two
different processes. See Software Registration,p.xii.

7. In-vehicle hardware setup

6. Adjust the speech volume

To hear CoPilot’s voice prompts,the volume on your Pocket PC must be
turned all the way up. In the Pocket PC Start menu,go to Settings and tap
on Sounds and Notifications. Under System Volume,move the slide
bar all the way to the right. Or use your Pocket PC’s keypad when CoPilot
is open:tap up until you reach the maximum volume.

WARNING: Never leave GPS receiver in closed vehicle that exceeds 140o F.
(For complete instructions,see the GPS Receiver Guide that came with the

product,or tap Tutorial in the Welcome screen on the Pocket PC.) First turn
on your Pocket PC, then make sure that the GPS receiver is attached and
powered and your engine is running before using CoPilot.

If you have a CoPilot vent mount and in-vehicle power adapter:

1. With engine running: Attach cable to Pocket PC and insert it into your
vehicle’s cigarette lighter socket. Make sure it’s firmly seated (red light on).

2. Attach vent mount clips to the vent in your vehicle,in a position that will
allow you to be comfortable as you view and operate CoPilot.

3. Slide the Pocket PC into the vent mount,and make sure it is turned on.

GPS Receiver Setup:

Open CoPilot and tap the GPS button in the Welcome screen to set up your
GPS receiver. For more details on connecting your GPS receiver, please refer
to the printed GPS Receiver Guide that came with your CoPilot product. It is
particularly helpful for Bluetooth receiver setup.

- vii - - viii -

8. Enter an address

7.

If an exact database match
was not found,you’ll see the
available address options.
Select a Nearby Address,a
Cross Street,or one of
several Streets in Nearby
Cities. Tap your choice,then
tap Next.

8.(Optional) Enter a name for
the place you entered,then tap
Finish.

9. You will be taken back to

the Going T o screen, where you
can either add another stop or
tap Start Driving to receive
guidance to the destination
you entered.

Step 7

Step 9

Step 8

9. Start driving!

Start driving! A text-only Driver Safety Screen will replace the Map Screen when
your road speed exceeds 10 m.p.h. Tap the top or bottom of either screen

to see the toolbar and menus.

Map Screen

Screen changes

above 10 m.p.h.

Driver Safety Screen

NOTE:There is no need to enter a starting point. CoPilot uses GPS positioning

to determine your location automatically.

1. In the Welcome screen,
tap Going T o.

2. In the Going To screen,

tapAdd Stop.

3. In the Select Stop screen,

tap Address.

4. Using the keyboard,

enter a ZIP Code and
tap Next, or start typing
the name of a state —
as you type,the scroll
list will move to that
state. Tap it on the list,
then tap Next

.

5. Type a city name or pick

one from the list and tap
Next.

6. Enter a house number

if you like (it’s optional),
then enter a street
name. As you type,
database matches will
appear below. If no
exact match is found,
highlight one of the
possible matches and
tap Next.

Step 1

Step 2

Step 3

Step 5 Step 6

Step 4

- ix -

- x -

Pocket PC Guidance Screens Quick Reference

Pocket PC Toolbar Buttons

Distance to
Next T urn

Next T urn
Instruction

GPS Status:

Green = 3D Fix
Yellow = 2D Fix
Red = No fix

Live Network

Connection

Message Queue

ETA and Distance

to Next Stop

Current Speed

(customizable)

Next T urn

Directional

Arrow

Nearest T o wn

(customizable)

Tap at the top or bottom of the Driver Safety or Map Screen

to display the toolbar and menus:

Detour button

gives you an

alternate route,

Cancel Detour

button puts you
back on original

route.

Going T o button takes

you to the Going T o

screen where you can

change your trip or start

a new one.

View button opens a

menu of screen options:

Driver Safety,

Map (three views),

3D View , or Itinerary.

Going T o - Takes you
to the Going T o screen.

Zoom In - Zooms in
for a closer map view.

Zoom Out - Zooms
the map view out.

Scroll Up - In the Itinerary
screen,scrolls the driving
directions up.

Detour - Generates an
alternate route from
your current position.

Cancel Detour - Returns
to the original route after a
detour has been created.

Avoid Road - In the
Itinerary screen, generates an
alternate route that does not
include the highlighted road.

Cancel Avoid - In the
Itinerary screen, restores the
original route after the Avoid
Road button has been used.

Scroll Down - In the
Itinerary screen, scrolls the
driving directions down.

(Tap top or bottom of Driver Safety or Map screen to see toolbar and menus.)

View:To switch views, tap the View button (second from left

on the toolbar — its appearance will reflect the current view)
and choose a view from the drop-down menu.

Destination - Map screen,frames the
view from your current position to
your final destination.

Trip Itinerary Screen - Basic text
overview of all your upcoming screens.

3D View - Map screen in 3D.

Next T urn - Map screen, frames your

current position to the next turn.

Where Am I - Map screen,frames a
close-up view of your current position.

Driver Safety Screen - Text only ,
switches to Map screen below 10 m.p.h.

- xi - - xii -

Contact Information

User’s Guide and Help files

Software Registration

Important Note, Please Read:

For NavMan GPS Jacket Users

Technical support is available to registered users during standard business hours —
Monday-Friday,9:00am-5:00pm.

North America - W eb:www.alk.com,E-mail:[e-mail],

Fax:[phone],Phone: [phone]

Europe - Web: www.alk.eu.com,E-mail: [e-mail],

Postal: Suite 8,4 Bloomsbury Square, London WC1A 2RP,UK

Phone:[phone]

Australia - Web: www.travroute.com.au/support.html,

E-mail: [e-mail],Phone: [phone]

ALK's 30-DAY MONEY BACK GUARANTEE and Return Policy:

We know you'll love our products. If,however, you are not satisfied with any
CoPilot product you purchase directly from ALK, you may return it within 30 days
for a refund of the price paid (excludes shipping and handling).Complete shipping
instructions can be found in the CoPilot User’s Guide and desktop Help, or go to
ALK’s web site at www.alk.com.instructions can be found in the CoPilot User’s Guide
and desktop Help,or go to ALK’s web site at www.alk.com.

NOTE: This policy does not include additional map data regions or product
bundles that include Pocket PCs.

For more detailed instructions,on your desktop go to the Windows Start menu >
Programs > CoPilot > User Manual to open and print the CoPilot User’s Guide in .PDF
format. Or refer to the CoPilot Help Files in your desktop application (Help menu
> Help Contents and Search) or on your Pocket PC (Tools menu > Help).

Registered users are entitled to technical support,discounts on new versions of
CoPilot,new product information,and software enhancements.

· North America: Go to www.alk.com (click "Support Center") or
call ALK® Technologies at 609-252-8191 (M-F, 9:00 AM - 5:00 PM EST).

· Europe: Go to www.alk.eu.com and click "Support Center".

· Australia: Go to www.travroute.com.au and click "Support".

ALK Technologies has a one-per-licensing non-transferable registration.
Unauthorized purchases from private owners are not supported or under
warranty,and special pricing does not apply.

If you are using this software with the NavMan GPS Jacket (the jacket will have
the word NAVMAN molded into the back of it and has a conical antenna), you
must install drivers for the jacket separately. For the NavMan drivers and
installation instructions visit our Support Center on http://www.alk.com or
follow this direct link to the FAQs:

http://www.alk.com/support/copilotlive_pocketpc5/faqs.asp

The NavMan FAQ is under the GPS Receiver and Tracking section.

Do not use this product in any way that interferes with safe and attentive
operation of a vehicle. The driver must remain alert at all times to actual road
conditions and obey all posted signs and traffic regulations. Always keep your
hands on the steering wheel and eyes on the road when driving! While
driving,either ask a passenger to operate CoPilot or pull over to the side of the
road when operating CoPilot on your Pocket PC .

CoPilot Overview

Your CoPilot | Pocket PC 5 Includes:

 Install/Data Discs
 Quick Start Guide
 GPS Receiver Guide
 GPSReceiver (not in software-only packages)
 In-Vehicle Power Adapter (not in software-only packages)
 Vent Mount (not in software-only packages)

Desktop PC Requirements

 Microsoft Windows 98, 2000, ME, XP, Windows NT

®

(4.0 or higher) or Windows Mobile 2003

 400 MHz processor or better
 16X CD-ROM or better
 128 MB of RAM and a hard drive with at least 225 MB

of available disk space

 Microsoft ActiveSync version 3.1 or later

Pocket PC Requirements

With Map Data on Storage Card

 Pocket PC running Pocket PC 2002 or WinMobile 2003 (first

or second edition)

 5-7 MB of storage RAM
 6-15 MB of program RAM (available for running programs)
 Storage Card recommended

(minimum 32MB,64MB recommended)

Third Party GPS Requirements

 Standard NMEA GPS receiver* including:

 CF GPS receivers
 iPAQ GPS Jacket
 Cabled GPS receivers
 Wireless Bluetooth GPS receivers

* For information on purchasing a GPS receiver from

ALK Technologies, go to www.alk.com.

A Safety Warning

Always keep your hands on the steering wheel and eyes on the road
when driving!

Do not use this product in any way that interferes with safe and attentive operation
of a vehicle. When used in a vehicle, do not place the GPS receiver,antenna, power
supply,or your computer where it may strike the driver or passengers if the vehicle
turns sharply or stops abruptly. This product is designed,manufactured,and
intended as an aid to planning and navigating routes. The accuracy of the map data,
driving directions,and GPS tracking system is insufficient for this product to be
used for automated navigation or in any situation in which the failure of the prod­uct could lead directly to death,personal injury,or physical or environmental dam­age. The driver must remain alert at all times to actual road conditions and obey all
posted signs and traffic regulations.

ALK Technologies assumes no responsibility for any damage or injury
resulting from the use of this product.

What’s New in Version 5.0?

 Redesigned Interface - The user interface has been redesigned to include

step-by-step address entry,more options for entering stops (including
Intersection and Latitude/Longitude) and more labels on buttons to better
convey their functionality.

 3D Map Display - Provides a realistic view of the road ahead.
 Enhanced 2d Map Display - Combines a larger map display with concise turn

instructions. The path ahead is easy to see now with Route Over Highlighting
and en-route turn arrows.

 Night Mode - Reduces glare from the Pocket PC and uses low-contrast map

colors.

 Expanded Voice Options - Four options are now available:Male and Female

Text-to-Speech, Male and Female pre-recorded sound files. Turn instruction
warnings at pre-set distance can now be toggled on or off depending on your
preference for a detailed vs.concise voice option.

 Map Updates - Map data for all regions has been updated and refined to

ensure that addresses can be found and correct routes can be calculated.

- 1 - - 2 -

Getting Started - Hardware

(For complete instructions,see the GPS Receiver Guide that came with the
product,or tap Tutorial in the Welcome screen on your Pocket PC.)

Both your desktop/laptop and your Pocket PC must be turned on. The
cradle/cable for your mobile device must be connected to your desktop/laptop
computer through either the USB or Serial port.

If you plan to transfer the map data to your mobile device's main memory,or to
a Storage Card in the device,there are no more connections needed.

If you plan to transfer data to a Storage Card through a Storage Card Reader,
you must also have the reader installed and connected to your desktop/laptop.
You can also use a PCMCIA adapter for your Storage Card if you have a laptop.

In-vehicle Hardware Setup:

WARNING: Never leave GPS receiver in closed vehicle that exceeds 140o F.

First turn on your Pocket PC, then make sure that the GPS receiver is attached
and powered and your engine is running before using CoPilot.

If you have a vent mount and in-vehicle power adapter:

1. After turning your engine on, attach the cable to the Pocket PC and
insert it into your vehicle’s cigarette lighter socket. Make sure it is firmly
seated (the red light should be on).

2. Attach the vent mount clips to the vent in your vehicle,in a position that
will allow you to be comfortable as you view and operate CoPilot.

3. Slide the Pocket PC into the vent mount,and make sure it is turned on.

- 3 -

Getting Started - Get Connected

In order to successfully transfer data from your desktop to your Pocket PC,
you must have Microsoft ActiveSync 3.1 (or later) installed. This software is
necessary to connect the two machines and is provided by your Pocket PC
manufacturer. If you did not receive this software with your mobile device,
contact the distributor immediately.

1. When connecting your Pocket
PC, if you have not set up a
partnership between your Pocket
PC and your desktop,you will be
prompted to do so. This is not
required. If you choose not to set
up a partnership select Guest

partnership, and
you will be logged
in as a Guest and
ready to transfer
data between
machines.

2. If you have set up a partnership
in the past,or choose to do so at

this point,be sure to allow your
Pocket PC to synchronize with
your desktop/laptop prior to
launching CoPilot.

NOTE:If your desktop/laptop
computer does not seem to be
recognizing the connection with your
Pocket PC,select Connection

Settings... from the drop-down
File menu, and make sure you're

connected using the appropriate
Port. Then click Get Connected...
in the File menu and follow the on­screen instructions.

- 4 -

Uninstalling a Previous Version

If you have been using an earlier version of Pocket CoPilot,you must uninstall the
application and its data before installing CoPilot. If you’re uninstalling CoPilot
from a Pocket device and installing the same version on another device,you must
deactivate the software on the first device before installing it again — see p. 12.

NOTE: When uninstalling CoPilot, your GPS receiver cannot be
attached. Before uninstalling, you must disconnect the receiver and perform a

soft restart. Then follow the steps outlined below:

(1) On your Pocket PC:

1. Tap the Start menu and select Settings>System>Remove Programs

2. Select the CoPilot application and tap Remove.

3. Select Pocket Speech and tap Remove.
4a.If you stored map data on a storage card:

i. Delete the CoPilot folder on the storage card. Tap Start, then Programs

> File Explorer > My Device > SD Card,then tap and hold on the CoPilot
folder and select Delete from the menu.

4b.If you stored map data on your device memory:

i. Delete the CoPilot folder on My Device.Tap Start, then Programs > File

Explorer > My Device,then tap and hold on CoPilot and select Delete
from the menu.

(2) On your Desktop/Laptop computer:

1. Select Start menu > Settings > Control Panel.

2. Double-click Add/Remove Programs.

3. Select the CoPilot application and click on the Remove button.

4. If asked to confirm the removal of CoPilot and all of its
components,selectYes.

5. If asked to remove shared files during the uninstall process,select
No T o All.

6. Select Start > Searc h > Files or Folders and find the CoPilot folder.

7. Right-click the CoPilot folder and select Delete.

Installing CoPilot

NOTE: You must uninstall any previous version of CoPilot from your
desktop/laptop and Pocket PC before proceeding (see above).

To install CoPilot, first turn on your computer and set up your Pocket PC.

Do NOT attach the GPS receiver yet,the application should not be
installed with the GPS receiver attached. Your Pocket PC should be

connected via ActiveSync, as described on p.4.
Follow the steps below to install:

3. After accepting the License
Agreement,make sure there are
check marks next to Pocket PC

Installation and Desktop
Installation in the Installation

menu screen. Click Next.

2. Enter your Product Key Code
when prompted,then click Next.

1. Inser t the CoPilot Install Disc in
your CD-ROM drive.Have your
Product Key Code ready (you
can find it on your printed Quick
Start). Click Next in the
Welcome screen and follow the
Installation Wizard’ s on-screen
instructions.

- 6 -- 5 -

- 7 -

6. The installation to your Pocket PC will
take a few minutes. Check your Pocket
PC screen to determine when the
installation is complete.

For NavMan GPS Jacket Users

If you are using this software with the NavMan GPS Jacket (the jacket will have
the word NAVMAN molded into the back of it and has a conical antenna), you
must also install drivers for the jacket separately.

For the NavMan drivers and installation instructions visit our Support Center on

http://www.alk.com or follow this direct link to the FAQs:
http://www.alk.com/support/copilotlive_pocketpc5/faqs.asp

The NavMan FAQ is under the GPS Receiver and Tracking section.

9. When the installation is complete,a CoPilot icon
will appear on your desktop or laptop. You are
now ready to start using CoPilot! For software
activation,see p.11.

8. As the desktop installation
proceeds,you will be given the
choice to install the CoPilot map

data to your hard drive. This is
the recommended option and

requires 700 MB of available space.
If you choose None,you will need
to insert the CoPilot Data Disc each
time you download data to your
Pocket PC or use CoPilot for trip
planning on your desktop.

- 8 -

7. When CoPilot has been installed
to your Pocket PC, you will be
prompted to begin the desktop/
laptop installation. Click Next and
follow the on-screen instructions.

5. Next, you will be prompted to choose
an installation location on the Pocket
PC. RECOMMENDED: To install
to a storage card,click No, then
choose Storage card from the drop-
down pick list. (To install to your
Pocket PC’s main memory,click Yes.)

4. The Installation Wizard will then
start installing to your Pocket PC,
beginning with the text-to-speech
software that delivers CoPilot’s
spoken driving instructions.

You’ll
be prompted to choose a voice
option. Text-to-speech provides
more detailed voice instructions,
including road names.Pre­recorded sound files are louder
and crisper, but provide less
detailed driving instructions. The
pre-recorded option saves space
on your Pocket PC.

Click Next to continue.

Adding a Data Region

If you have purchased an additional data region after your initial purchase of
CoPilot,you will need to modify the original (“Base”) installation and activate the
new region.

IMPORTANT: You can only use your Expansion Product Key AFTER you have
installed CoPilot with a Base Product Key. If you have not yet installed CoPilot,
please do so first and then follow the instructions below. The Base Product Key
can be found on the printed Quick Start Guide that comes with CoPilot.

ON Y OUR DESKTOP/LAPTOP:

1.Insert your CoPilot Install Disc into your CD-ROM drive.

2.Select Modify and click Next when the InstallShield Wizard appears.

3.Enter your Expansion Product Key when prompted to enter a Product Key.

4.Follow the on-screen instructions.

5. The Activation Wizard will appear at the end of installation. Activation occurs
just as it did when you originally installed CoPilot.

ON YOUR POCKET PC:
IMPORTANT: You must install CoPilot to your Pocket PC using your Base

Product Key AND you must have data downloaded to your Pocket PC before
using your Expansion Product Key.

1.Open CoPilot on your Pocket PC.

2.If your GPS receiver is attached,CoPilot will ask you to confirm your
destination or to enter a new one.Enter any destination to proceed.If your GPS
receiver is not attached,go to Step 3.

3.Tap Tools > Upgrade License from the menu on the bottom of the screen.

4.Enter your Expansion Product Key (found in your order confirmation e-mail)
when prompted to enter a Product Key.

5.Follow the on-screen instructions.

6.Activation occurs just as it did when you originally installed CoPilot.
If you have any questions,please visit our Support Center at www.alk.eu.com

or send an e-mail to [e-mail].

Region Selection

If you purchased an additional data region, when downloading map data to your
Pocket PC you will need to make sure the proper region is active. To do this,on
your desktop in Planning mode click the Map menu > Region > and check the
desired region.

Changing the Voice Option at Any Time

CoPilot offers the following voice options:

 Male T ext-to-Speech
 Female T ext-to-Speech
 Male Pre-Recorded Sound Files
 Female Pre-Recorded Sound Files

To change the voice option:

1. Connect your Pocket PC to your PC via Activesync.

2. Insert the Install Disc into your CD-ROM drive.

3. Select Modify from the InstallShield menu and click Next.

4. Enter your Product Key (see the front of the printed Quick Start that came
with the product) and click Next.

5. Make sure that ONLY PocketPC-Installation is checked and click Next.

6. Select your voice option and click Next.

7. ClickYes to reinstall Pocket Speech.

8. Click No to reinstall CoPilot.

9. Click Yes to install in the default directory if that’s where you originally
installed. If you installed CoPilot elsewhere, click No and choose the
appropriate location.

10. Tap Ok on your Pocket PC to reinstall.

11. Tap Y es to All if prompted.

12. Click Ok on your desktop,then click Finish to complete the process.

- 9 - - 10 -

Software Activation

You will be asked to activate your new software when you open CoPilot on your
Pocket PC. Note that, unlike in previous versions,desktop activation is no
longer required. You can now open and use CoPilot’s desktop trip planning
software without activating it.

Keep your Pocket PC connected to your desktop and open CoPilot on your
Pocket PC. Follow the steps below to activate on your Pocket PC:

Automatic Activation

If your desktop is connected to the Internet

1. Connect your Pocket PC to your desktop via ActiveSync.

2. On your Pocket PC go to Start > Programs > CoPilot.

3. An activation screen will appear. Follow the on-screen instructions and
click Next.

4. In the next screen, enter your e-mail address and click Next. You will
see the message “License activated successfully” when the process is
finished. Click Next to begin using CoPilot.

Manual Activation

1. Connect your Pocket PC to your desktop via ActiveSync.

2. Make sure your desktop has an active connection to the Internet

3. On your Pocket PC go to Start > Programs > CoPilot.

4. An activation screen will appear. Check Activate Manually and tap
Next.

5. The next screen is the Activation Code screen where you'll see your
Product Key and License ID. You'll need this information to manually
activate CoPilot as follows:

a. On your desktop visit ALK's activation web page

(http://activate

.alk.com)

i. On the ALK activation page enter your Product Key,License

ID and e-mail address,then click Submit. Your Activation
Code will appear on-screen and an e-mail that contains your
Activation Code will be sent to you.

ii. Enter your Activation Code in the blank field in the Activation

Code screen and click Activate.

b. If you do not have internet access you can call,fax or e-mail ALK.

Technical support is available to registered users during standard
business hours. See Technical Support,p.93.

NOTE: Software activation does NOT register your software,they are two
different processes. See Software Registration,p.92.

Deactivation and License Update

If you’re planning to uninstall CoPilot from one
Pocket device and install the same version on
another device,you need to deactivate the software
on the first device before installing it again. To do
this,open CoPilot on your Pocket PC. If you can’t
see the menus and toolbar, tap at the top or bottom
of the screen. Tap the Tools menu,select Update
License,then tap Deactivate in the License
Manager. Your Pocket PC must be synchronized for
the deactivation process to take effect. When you
re-install CoPilot on another device,you will be
asked to activate it again.

Speech V olume

To hear CoPilot’s voice prompts,the volume on your Pocket PC must be turned all
the way up. In the Pocket PC Start menu,go to Settings and tap on Sounds and
Notifications. Under System V olume, move the slide bar all the way to the right.
Or use your Pocket PC’s keypad when CoPilot is open:tap up until you reach the
maximum volume.

If you installed the TTS (text to speech) voice option,you may also want to
make sure the “Amplify Speech Volume” option is on — tap the Tools menu
(if you don’t see it,tap at the top or bottom of the screen), select Options,and
tap the Guidance tab. This option should be checked.

- 12 -- 11 -

Data Download to Your Pocket PC

To use CoPilot on your Pocket PC,you first need to download map data from
your desktop or laptop computer to your Pocket device. You select the data to
download from one or more regions (“data areas”) that you specify in the CoPilot
application on your desktop. It’s a simple 4-step process.

Step 1:

Specify Where Data Will Be Stored

To begin the data download process,open the CoPilot application on your desk­top/laptop,then click the Data Download Wizard icon or pick Data Download
Wizard from the File menu.

CoPilot gives you three options for downloading data:

1) directly to the Pocket device's memory,

2) to a Storage Card in the device,or

3) to a Storage Card through a Storage Card Reader.

You will be prompted to enter one of these choices before you can download.
CoPilot will detect which options are available to you.

NOTE: If there is data stored on the device's memory and also on a
Storage Card in the device, CoPilot will use the map data on the
Storage Card by default. To have it use the device's memory,you must
remove the Storage Card.

- 14 -

1.To download to Pocket PC

Device Memory:

(In this example, CoPilot has
detected that there is no Storage
Card in the device.) Click Next
to go to the Data Selection window.
See CoPilot QuickStar t, p.14, for a
description of software included in
downloads. See p. 24 for Options.

2.To download to a Storage

Card in the device:

(In this example, CoPilot has
detected that all options are
available.) Select a storage card
name from the drop-down pick
list,then click Next to go to the

Data Selection window. See CoPilot
QuickStart, p.14, for a description

of software included in downloads.
See p.24 for Options.

- 13 -

3.To download to a Storage

Card through a Card Reader:

(In this example, again all options
are available.) Pick the drive letter
associated with your Storage Card
Reader, then click Next to go to
the Data Selection window. See
CoPilot QuickStart below for a
description of software included in
downloads. See p. 24 for Options.

NOTE: You can also download to a Storage Card through a PCMCIA
adapter. Simply identify the drive letter associated with the adapter under the

Storage Card Reader option.

CoPilot QuickStart

Storage Card Application Download

If you are downloading map data to a Storage Card or Storage Card
Reader, you have the option to download a complete, ready-to-use
“QuickStart” version of CoPilot along with the data. Having the
QuickStart version on your Storage Card ensures that CoPilot will be
available even if you experience technical problems with your Pocket PC
and need to perform a hard reset. (During a hard reset, all installed
applications are deleted from the P ocket PC.) Inserting a storage card

with the QuickStart version on it will automatically install
CoPilot, and your map data will already be there!

The QuickStart option can be turned on or off in the final step of the
download process (see p. 23). By default this option is active and

the QuickStart download will be executed each time you
download map data.

The QuickStart needs 10 MB of space on your Storage Card. Once the
QuickStart has been copied, you can save time the next time you
download data by unchecking the Create QuickStart option in the final
Data Download Wizard screen before proceeding to download. You will
also want to uncheck this option if you do not hav e enough room on y our
Storage Card for it.

If the QuickStart is copied onto your Storage Card and you need to
remove it, simply delete the folder that contains it. The folder will be
named “2577”.

Data Download

Step 2:

Choose a Data Selection Method

After you specify a location where the data will be stored,you will be prompted
to select a region on the map to download. CoPilot allows you to download
data using one of the three methods described below.

See Data Download Step 3 beginning on p.17 for step-by-step instructions for
downloading data to your Pocket PC using each of these three methods.

City Radius - This method allows you to quickly select data in the shape of a

circle surrounding any city on the map. In the Data Download Wizard you type a
city name and state abbreviation or ZIP code and enter the number of miles you

would like the radius to extend
around the city, then click Next.

The Wizard displays a map that
shows the city and the radius
you chose. At this point you can
zoom the map in and out using
zoom buttons and adjust the size
of the data area by altering the
radius of the circle.

Map Area - This method of selecting data allows you to choose an area of data

by drawing a box on the Data Download Wizard's map screen.
In the Wizard, you enter a city name near which you would like to select data,then

click Next. The map will zoom to that

location. Then you create a
box around the desired area by
clicking and dragging your mouse
across the map. The street-level
data within that box will be
selected.

You can zoom the map in and
out using the zoom buttons and
adjust the size of the data area
by redrawing the box.

Trip - The Trip method of selecting data is by far the most customizable method.

This option allows you to run a trip and select street-level data specific to that trip,
thereby avoiding unneeded data and saving valuable memory space.

Once the trip is run,the Data Download Wizard automatically selects circles of data

around your origin and destina­tion,and a corridor of data along
your route. You can then click
Options to adjust the radius of
the circles and the width of the
corridor.

The Trip Itinerary for each trip
you download will be stored on
your Pocket PC (see T rip Tr ansfer,
p.24).Multiple trips can be
downloaded to the Pocket PC
for later use.

- 15 - - 16 -

City Radius

Map Area

Trip

Data Download

Step 3:

Select Your Data

Use any of the three methods covered on the following pages (City Radius,
Map Area,or Trip) to select one or more regions and then download your data.

City Radius

- 18 -

Note: CoPilot’s available
memory calculations subtract
15 MB from the available
memory on your storage
card (if you are using one)
to account for support files.

1. Click the City Radius icon.

4. Name the selection, then
click Next.

5. You will return to the Data
Selection menu where you can
select another data area if you
like,using any method. When
you finish selecting data areas,
click the Download icon and
you will be taken to the final
screen where you can build
your download.

2. Enter a City,State or ZIP
code, and a mile radius
around the area that you
would like to download. Click
Next to verify that the area is
correct.

3. Using the Data Download
Wizard toolbar you can zoom
in or out,change the radius, or
go back to the previous screen.
When you are satisfied with
your selection,click Next.

- 17 -

Map Area

- 19 - - 20 -

Note: CoPilot’s available
memory calculations subtract
15 MB from the available
memory on your storage card
(if you are using one) to
account for support files.

4. Name the selection, then
click Next.

2. Enter a City,State or ZIP
code (address optional) within
the area that you would like to
download. Click Next.

5. You will return to the Data
Selection menu where you can
select another data area if you
like,using any method. When
you are finished selecting data
areas,click the Download icon
to go to the final screen where
you can build your download.

3. Click and hold the left

mouse button and drag the
cursor to draw a box around

a desired area. The size of the
area will be displayed in the
toolbar. Click Next.

1. Click the Map Area icon.

Trip

- 21 -

3. If you choose the Points of
Interest tab, enter a City,State
or a ZIP Code and click the
Find button.

You can specify search
parameters by selecting a POI
Category and/or Type (this
will speed up the search).

3a. Highlight a selection, click

Select,then Add Stop.
When all your stops have
been entered,click Select
Data.

4. By default a 20 mile radius
around all stops and a width of
4 miles along the corridor
which connects them will be
highlighted. Note: CoPilot’s
available memory calculations
subtract 15 MB from the avail­able memory on your storage
card (If you are using one) to
account for support files.

5. To customize these
distances for any trip,click
Options and type a distance
in the appropriate box.

6. You will return to the Data
Selection menu where you can
select another data area if you
like,using any method. When
you are finished selecting data
areas,click Download. Trip
itineraries that were created
using the Trip download
method will be transferred
along with map data (see p.24
for details).

1. Click the Trip icon.

2. You now have three options for
entering stops on your trip. If
you choose the Cities and
Addresses tab you will need to
enter a City, State or ZIP
code, press <Enter>,and click
the Add Stop button.

You may enter one or multiple
destinations. Use the buttons
to the right of the Itinerary to
zoom to a stop on the map,
change the order of stops,or
delete a stop.

- 22 -