ALK Technologies CoPilot Truck User Manual

Contents

Welcome to CoPilot Truck | Mobile!..............................1

Safety Warning................................................................2

Getting Started....................................................................3

Requirements ..................................................................3

Hardware Setup ..............................................................4

Connecting Your Smartphone ..........................................6

Installing CoPilot ..............................................................7

Software Activation ..........................................................8

Deactivation and License Upgrade ..................................8

Adding a Data Region ......................................................9

Region Selection ..............................................................10

Changing the Voice Option At Any Time..........................10

Map Download To Your Smartphone ............................11

Data Selection Options....................................................13

Data Download Options ..................................................19

CoPilot Quick Start Application Download ..........20

POI Download Options ....................................................21

Trip Transfer ....................................................................22

Importing Custom Places ................................................23

Using CoPilot for Guidance ..........................................27

Address Entry ..................................................................28

Stop Menu Options ..........................................................31

Entering a Home Address ................................................34

Entering a Work Address ................................................34

Favorites ..........................................................................35

Intersection ......................................................................36

Contact Integration ..........................................................36

Finding Points of Interest ................................................37

Picking Stops from the Map ............................................40

Start Driving! ....................................................................41

Safety View ..........................................................41

Map Views ............................................................42

Itinerary View ........................................................43

Trip Editing ......................................................................44

Taking a Detour ................................................................45

Selective Routing: Avoiding Roads ..................................46

Selective Routing: What Are Waypoints? ........................46

Getting ETA’s and Distances............................................47

Saving a Current Location................................................48

Optimizing Your Stop Order..............................................48

Options ............................................................................49

GPS Options ........................................................49

Routing Options ....................................................51

Guidance Options ................................................54

Map Options ........................................................54

Live Options..........................................................55

Upgrade License ..................................................55

Traffic Options ......................................................55

POI Alerts..............................................................56

CoPilot Modes ..................................................................58

Trip Planning On Your Smartphone ..............................59

Trip Planning On Your Desktop PC ..............................61

Reference: CoPilot on Your Desktop................................70

CoPilot Live Communications ......................................75

Real-Time Traffic Information ........................................78

CoPilot Technical Support ............................................81

Using Help Files ..............................................................82

Software Registration ....................................................82

Welcome to CoPilot Truck | Mobile!

CoPilot Truck | Mobile is changing the way truck drivers work, making it

possible for street-level directions to be generated on a mobile phone, anywhere, within seconds. CoPilot Truck | Mobile, the first navigation system specifically designed for company drivers, owner operators, and leased operators, is the only way to get truck-specific directions on Smartphones.

Stay on Truck-Legal Roads with CoPilot

CoPilot Truck | Mobile, now available for Windows Mobile -based Smartphones, provides turn-by-turn driving directions respecting commercial truck restrictions. CoPilot Truck | Mobile can be used in or out of the vehicle. There’s no need to look at a printed map — you just listen and go!

CoPilot Truck | Mobile Features

 Spoken dock-to-dock directions  Automatic route recalculation  Detour around traffic and avoid roads  Portable and easy to use  Easy to see display screen  Immediate access to up-to-date maps

CoPilot Truck | Mobile Includes...

 6 million miles of U.S. roadways  1 million kilometers of Canadian roadways  13’6” height and 80,000 lb weight restrictions  Hazmat and 53’/102” trailer restrictions  Over 100 million North American addresses  3 million points-of-interest including truck stops, weight stations,

and fuel locations

 31,000 exit numbers

How CoPilot Uses GPS Technology

The Global Positioning System (GPS), developed by the U.S. Department of Defense, is a constellation of 24 satellites that orbit the Earth twice daily. Each satellite contains an atomic clock that is accurate to the nanosecond, and constantly emitting radio waves toward Earth. GPS sensors (hardware devices for receiving data) can receive these signals from the satellites. GPS relies on the fact that radio waves travel at the speed of light to calculate distances, and the exact location of the sensor is figured by combining the data received from four satellites.

Using the data from these four satellites, GPS is able to give you the latitude, longitude and elevation of your present location, and also your road speed and direction of travel on a route. Given the right conditions, a GPS sensor can identify your geographic position anywhere in the world within a few meters.

CoPilot uses the GPS positional data that it receives from your hardware unit to display your current position on a map as you drive. This is called "tracking". CoPilot also uses GPS data to guide you along a planned route if you enter a destination on your Smartphone. CoPilot guides you with audible prompts as well as on-screen directions as you drive.

GPS Accuracy

The GPS signal CoPilot receives from the constellation of satellites has a rated accuracy of within 5 - 10 meters. This means that 95% of the time the reported location is within 15 - 30 feet of your exact position. If CoPilot initially places you on the wrong road (this happens only rarely), keep driving and CoPilot will automatically correct itself and find your proper position.

Occasionally, CoPilot's GPS tracking will be less accurate or fail to work at all because your GPS receiver is unable to receive satellite signals. Heavy foliage, tall buildings, or any other structures obstructing communications will interfere with CoPilot's ability to track your location. Like your car radio, GPS tracking can also be affected by weather conditions if severe. CoPilot will continue tracking as soon as adequate signals are available. Despite these limitations, you can expect CoPilot to provide you with useable and accurate information most of the time. CoPilot will alert you if accurate information is unavailable.

Safety Warning

Always keep your hands on the steering wheel and eyes on the road when driving!

Do not use this product in any way that interferes with safe and attentive operation of a vehicle. When used in a vehicle, do not place the GPS receiver, antenna, power supply, or your computer where it may strike the driver or passengers if the vehicle turns sharply or stops abruptly. This product is designed, manufactured, and intended as an aid to planning and navigating routes. The accuracy of the map data, driving directions, and GPS tracking system is insufficient for this product to be used for autoated navigation or in any situation in which the failure of the product could lead directly to death, personal injury, or physical or environmental damage. The driver must remain alert at all times to actual road conditions and obey all posted signs and traffic regulations.

ALK Technologies assumes no responsibility for any damage or injury resulting from the use of this product.

- 1 -

- 2 -

Getting Started

This User’s Guide includes complete instructions for installing your CoPilot Truck | Mobile software, downloading map data to the Smartphone, and using CoPilot on your Smartphone to guide you to your destination or to plan trips.

Here are the steps you need to take to get up and running with CoPilot Truck | Mobile:

Connect your Smartphone to your desktop/laptop.

Install CoPilot to your desktop and Smartphone using the Product Key found on the printed CoPilot Quick Start

or on

the supplied Product Key card

On your desktop, create a map data region and download it to your Smartphone.

Activate CoPilot on your Smartphone.

Enter an address and Start Driving!

Desktop PC Requirements

To install CoPilot Truck | Mobile on your desktop or laptop PC, you must have:

 Microsoft Windows 98, 2000, ME, XP, Windows NT

(4.0 or higher) or Windows Mobile 2003

 400 MHz processor or better  16X CD-ROM or better  128 MB of RAM and a hard drive with at least 225 MB

of available disk space

 Microsoft ActiveSync version 3.1 or later

Smartphone and GPS Requirements

 Smartphone 2002 or 2003  Bluetooth GPS receiver

Hardware Setup

WARNING: Never leave your Smartphone or GPS receiver in a closed vehicle that exceeds 140

Configuring the Bluetooth GPS Receiver:

1. Switch on your Bluetooth GPS receiver by flipping the switch to 1. The green and blue lights should turn on if the GPS receiver is properly charged.

Important: Please charge the receiver for several hours before set-up using the supplied in-car charger.

2. Launch CoPilot: From your home screen select Start > CoPilot.

The GPS Status screen will be displayed.

NOTE: On the MPx220 select Start > Settings > Bluetooth > Bluetooth.

3. If Bluetooth does not have a green checkmark next to it (see picture below), select Menu > Turn On Bluetooth.

4. Press Menu > Search for GPS to search for your Bluetooth GPS receiver. When your receiver appears in the list, press Select.

After a few seconds the system should display ‘GPS Signal: Found’. If after a few minutes the system has not found a GPS receiver, exit CoPilot, turn off the phone, turn off the GPS receiver, and then repeat steps 1 to 4.

Trouble-shooting: In the unlikely event that the system is still unable to find the GPS receiver, see GPS Trouble-shooting, p. 5.

5. Select Done. You are now ready to start navigating!

The small square on the bottom right of your screen in Guidance mode indicates your GPS ‘fix’ (see next page). Green is good, yellow is okay, and red means your GPS receiver does not have a fix.

- 3 -

- 4 -

GPS Trouble-shooting:

If you still can't get a GPS signal, follow these steps and check the GPS status after each step:

1. Go to Start > Settings > Bluetooth. Check that Bluetooth is set to "On" (not "Discoverable" or "Off"). Some Smartphones automatically turn off Bluetooth when memory resources are low. Bluetooth is usually turned back on when memory resources become available.

2. Go to Start > Configurations > BTSerialPortSetup and check that the Outbound COM port is checked.

3. Close CoPilot.

4. Turn the phone off.

5. Turn the phone on.

6. Go through the directions above from scratch.

- 5 -

Connecting Your Smartphone

In order to successfully transfer data from your desktop to your Smartphone, you must have Microsoft ActiveSync 3.1 (or later) installed. This software is necessary to connect the two machines and is provided by your Smartphone manufacturer. If you did not receive this software with your mobile device, contact the distributor immediately.

1. When connecting your Smartphone, if you have not set up a partnership between your Smartphone and your desktop, you will be prompted to do so. This is not required. If you choose not to set up a partnership select Guest

partnership, and you will be logged in as a Guest and ready to transfer data between machines.

NOTE: If your desktop/laptop computer does not seem to be recognizing the connection with your Smartphone, select Connection Settings... from the dropdown File menu, and make sure you're connected using the appropriate Port. Then click Get Connected... in the File menu and follow the on-screen instructions.

2. If you have set up a partnership in the past, or choose to do so at this point, be sure to allow your Smartphone to synchronize with your desktop or laptop prior to launching CoPilot.

- 6 -

To return to the GPS Status screen select

Menu > Options > GPS.

TIP: Your GPS receiver won’t function

properly inside a building. Please be sure that the receiver has a clear line of sight to the sky, for example by placing it on a vehicle dashboard.

Software Activation

You must activate your CoPilot software in order to use it. The first time you open CoPilot on your Smartphone, the Activate screen will appear and you will be asked to activate the software.

For Automatic Activation, follow the on-screen instructions:

1. Synchronize your Smartphone with your desktop/laptop computer via ActiveSync.

2. Connect your desktop/laptop to the Internet.

3. Press Done when ready and enter your e-mail address when prompted. CoPilot will be automatically activated within a few seconds. Press Done to begin using CoPilot.

If you are unable to synchronize your Smartphone with your desktop/laptop but have internet access, you can select Activate Manually. Follow the onscreen instructions.

Deactivation and License Upgrade

The CoPilot desktop software contains street-level maps for all of Europe and the United States, and CoPilot is offered with different licenses that allow you to use some or all of these maps on your mobile device. Licenses are available for the following:

(1) Single region - Detailed street-level maps for any of the following regions: Alps Ski Region, Benelux (Belgium, the Netherlands, and Luxembourg), France, Germany, Italy, Pyrenees, Scandinavia, and the United Kingdom.

(2) Pan-Europe - Complete street-level maps for all of Europe

(3) United States - Complete street-level maps for the entire U.S.

After purchasing the license, go to Menu > Options > Upgrade License. Press Menu > Activate/Upgrade, and input your upgrade Product Key. Proceed through the activation process. The CoPilot desktop software already contains complete European maps, which can now be downloaded to your mobile device for in-vehicle use. If you purchased CoPilot with a single region license and later want to use street maps from other regions, you will need to purchase an upgrade license from your dealer.

- 7 -

- 8 -

Installing CoPilot Truck | Mobile

Your desktop/laptop and Smartphone should both be turned on. The cradle/ cable for your mobile device must be connected to your desktop through either a USB or Serial port. Your Smartphone should be connected to your desktop via ActiveSync (see p. 6).

Installation Steps:

Step 1: Insert the CoPilot Truck | Mobile Install Disc into your CD-ROM

drive. After a few seconds, the Installation Wizard will open. Follow the instructions, entering your Installation Product Key when prompted. This Product Key can be found on the front cover of your printed Quick Start Guide or on the supplied Product Key card.

NOTE: When asked to choose a language, you may have to scroll up to find the language you want.

The CoPilot application will be installed to your desktop PC and to your Smartphone separately. The Smartphone installation will ask if the default location (the device’s storage memory) is where you want the application to be placed.

Step 2: When the installation is complete, a CoPilot icon will appear on

your desktop. Click Finish to close the Installation Wizard.

Step 3: The first time you open CoPilot Truck | Mobile on your

Smartphone, you will be asked to activate the product. You can open and use CoPilot’s desktop trip planning software without activating it.

Region Selection

If you purchased an additional data region, when downloading map data to your Smartphone you will need to make sure the proper region is active. To do this, on your desktop in Planning mode click the Map menu > Region > and check the desired region.

Changing the Voice Option at Any Time

CoPilot offers one or both of the following voice options, depending on your selected language:

 Male Pre-Recorded Sound Files

 Female Pre-Recorded Sound Files

To change the voice option:

1. Connect your Smartphone to your PC via Activesync.

2. Insert the Install Disc into your CD-ROM drive.

3. Select Modify from the InstallShield menu and click Next.

4. Enter your Installation Product Key (found on the front of your printed Quick Start Guide or on the supplied Product Key card) and click Next.

5. Make sure that ONLY Smartphone Installation is checked and click Next.

6. Select your voice option and click Next.

7. Click Yes to reinstall Pocket Speech.

8. Click No to reinstall CoPilot.

9. Press Ok on your Smartphone to reinstall.

10. Press Yes to All if prompted.

11. Click Ok on your desktop, then click Finish to complete the process.

Adding a Data Region

If you have purchased an additional data region after your initial purchase of CoPilot, you will need to modify the original (“Base”) installation and activate the new region.

IMPORTANT: You can only use your Expansion Product Key AFTER you have installed CoPilot with a Product Key for the Base product. If you have not yet installed CoPilot, please do so first and then follow the instructions below.

ON YOUR DESKTOP/LAPTOP:

1. Insert your CoPilot Install Disc into your CD-ROM drive.

2. Select Modify and click Next when the InstallShield Wizard appears.

3. Enter your Expansion Product Key when prompted to enter a Product Key.

4. Follow the on-screen instructions for installing to your desktop and Smartphone.

5. The Activation Wizard will appear at the end of installation. Activation occurs just as it did when you originally installed CoPilot.

ON YOUR SMARTPHONE:

IMPORTANT: You must install CoPilot to your Smartphone using your

Base Product Key AND you must have data downloaded to your Smartphone before using your Expansion Product Key.

1. Open CoPilot on your Smartphone.

2. Press the Menu softkey, then select Options > Upgrade License.

3. Enter your Expansion Product Key (found in your order confirmation e-

mail) when prompted to enter a Product Key.

4. Follow the on-screen instructions.

5. Activation occurs just as it did when you originally installed CoPilot.

If you have any questions about this process, please visit our Support Center at www.alk.eu.com or send an e-mail to support@alk.com.

- 9 -

- 10 -

- 12 -

Map Download to Your Smartphone

To use CoPilot Truck | Mobile on your Smartphone, you first need to download map data from your desktop or laptop computer to your mobile device. You select the data to download from one or more regions that you specify in the CoPilot application on your desktop. It’s a simple process.

To begin the data download process, open the CoPilot Truck | Mobile application on your desktop/laptop, then click the Data Download Wizard icon or pick Data Download Wizard from the File menu. CoPilot gives you two options for downloading data:

· Download directly to your Smartphone using a Storage Card Reader —

follow steps (1), (2), and (3a) below.

· Download to a hard drive on your computer, then manually copy the

data to your Smartphone using ActiveSync — follow steps (1), (2), and (3b) below.

(1) Choose a Storage Location:

1. Open the CoPilot application on your desktop/laptop, then click the Data Download Wizard icon in the sidebar on the left. Make sure your Smartphone is synchronized. CoPilot will scan your computer to detect which drive options are available.

2. Click on the Drive Name pick list that appears and select either the drive letter of your Storage Card Reader (if you are using one) or the drive letter of your Hard Drive (e.g. C). Click Next.

(2) Select a Data Area:

Select a data area using one of three methods (see Data Selection Options p. 13-18 for a description of each method):

City Radius to select an area around a town or city;

Map Area to select an area directly from the map;

Trip to select a corridor along a route between two places.

- 11 -

(3) Download the Data:

(3a) Using a Storage Card Reader:

1. Make sure the Storage Card for your Smartphone is inserted in the Storage Card Reader.

2. Clicking the Download icon will take you to a screen where Available Area(s) for download are displayed on the left. To designate an area to include in the download, highlight it and then click on the right arrow button to move it to the Data Included in This Download list on the right. To take an area off the list, highlight it and click the left arrow button.

3. After confirming that the area(s) you would like to download are in the Data Included in This Download list, click Download to complete the map data download process (see Data Download Options, p. 19-20).

4. Remove the Storage Card from the Storage Card Reader and insert it into the Smartphone. Your data is now ready to be used by CoPilot.

(3b) Using ActiveSync:

1. Ensure that your Smartphone is connected to the desktop/laptop via ActiveSync.

4. On the desktop, double click the My Computer icon. Navigate to the drive letter you downloaded the data to. The data you downloaded will be in a folder named "CoPilot". For example, if you had chosen Drive C, the data would be in the folder "C:\CoPilot\".

5. Copy the CoPilot folder by right clicking on it and selecting Copy.

6. Open ActiveSync and click on the Explore icon. Navigate to the Smartphone's Storage Card. Use the menu option Edit > Paste to copy the folder to your Smartphone's Storage Card.

Data Selection Options

After you specify a location where the data will be stored, you will be prompted to select a region on the map to download. CoPilot gives you a choice of three ways to select a data region, described p. 13-19 below.

City Radius Data Selection

This method allows you to quickly select data in the shape of a circle surrounding any city on the map. In the Data Download Wizard you type a city name and state abbreviation or ZIP code and enter the number of miles you would like the radius to extend around the city, then click Next.

The Wizard displays a map that shows the city and the radius you chose. At this point you can zoom the map in and out using zoom buttons and adjust the size of the data area by altering the radius of the circle.

Follow these steps to download City Radius data:

- 13 -

- 14 -

1. Click the City Radius icon in the Data Download Wizard.

2. Enter a City, State or ZIP code, and a mile radius around the area that you would like to download. Click Next to verify that the area is correct.

4. Name the selection, then click Next.

5. You will return to the Data Selection menu where you can select another data area if you like, using any method. When you finish selecting data areas, click the Download icon and you will be taken to the final screen where you can build your download.

Note: CoPilot’s available memory calculations subtract 15 MB from the available memory on your storage card (if you are using one) to account for support files.

3. Using the Data Download Wizard toolbar you can zoom in or out, change the radius, or go back to the previous screen. When you are satisfied with your selection, click Next.

- 15 -

- 16 -

Map Area Data Selection

This method of selecting data allows you to choose an area of data by drawing a box on the Data Download Wizard's map screen.

In the Wizard, you enter a city name near which you would like to select data, then click Next. The map will zoom to that location. Then you create a box around the desired area by clicking and dragging your mouse across the map. The street-level data within that box will be selected.

You can zoom the map in and out using the zoom buttons and adjust the size of the data area by redrawing the box.

Follow these steps to download Map Area data:

1. Click the Map Area icon in the Data Download Wizard.

Note: CoPilot’s available memory calculations subtract 15 MB from the available memory on your storage card (if you are using one) to account for support files.

2. Enter a City, State or ZIP

code (address optional) within the area that you would like to download. Click Next.

3. Click and hold the left

mouse button and drag the cursor to draw a box

around a desired area. The size of the area will be displayed in the toolbar. Click Next.

4. Name the selection, then click Next.

5. You will return to the Data

Selection menu where you can select another data area if you like, using any method. When you are finished selecting data areas, click the Download icon to go to the final screen where you can build your download.

- 17 -

- 18 -

Trip Data Selection

The Trip method of selecting data is by far the most customizable method. This option allows you to run a trip and select street-level data specific to that trip, thereby avoiding unneeded data and saving valuable memory space.

Once the trip is run, the Data Download Wizard automatically selects circles of data around your origin and destination, and a corridor of data along your route. You can then click Options to adjust the radius of the circles and the width of the corridor.

The Trip Itinerary for each trip you download will be stored on your Smartphone. Multiple trips can be downloaded to the Smartphone for later use (see Trip Transfer, p. 22).

Follow these steps to download Trip data:

1. Click the Trip icon.

3. To search for a POI, click the Points of Interest tab, enter a City, State or a ZIP Code and click the Find button.

You can speed up your search by selecting a POI Category and/or Type.

3a. Highlight a selection, click

Select, then Add Stop.

2. Enter at least a start and end place for your trip. In the Cities and Addresses tab, type a City, State or ZIP Code and press <Enter>. Optionally, you can enter an address in the same way. Click the Add Stop button to add this place to your trip.

You may enter one or multiple destinations. Use the buttons to the right of the Itinerary to zoom to a stop on the map, change the order of stops, or delete a stop.

Note: For a more detailed description of trip entry, open CoPilot Help from the desktop application (Help menu > Help Contents and Search).

4. When all your stops have been entered, click Select Data.

By default a 20 mile radius around all stops and a width of 4 miles along the corridor which connects them will be highlighted. Note: CoPilot’s available memory calculations subtract 15 MB from the available memory on your storage card (If you are using one) to account for support files.

5. To customize these distances for any trip, click Options and type a distance in the appropriate box.

- 19 -

- 20 -

6. You will return to the Data Selection menu where you can select another data area if you like, using any method. When you are finished selecting data areas, click Download. Trip itineraries that were created using the Trip download method will be transferred along with map data (see p. 22 for details).

Data Download Options

When you’re ready to execute a download, the Wizard will display a list of Available Area(s) for download on the left side of the window. To designate an area to include, click on it and then click on the right arrow button to move it to the Data Included in This Download list. If you need to move an area off the Included list, click on it and use the left arrow button.

To delete an area from memory, click on it and click Delete.

Notice that the amount of available map memory and the memory required for all the areas on the Included list is shown beneath the list. NOTE: CoPilot's available memory calculations subtract 15 MB from the your storage card (if you are using one) to account for support files.

IMPORTANT: Each data download overwrites the data that is already on your Smartphone. If any data areas are already loaded on your

Smartphone, they will be overwritten by the new download. Therefore, your download must include all areas that you wish to have available on your Smartphone.

Check Include US Highway Network to download CoPilot’s complete United States Highway Network along with your data. This additional download requires approximately 36 MB of space on your Smartphone. When this network is loaded, major roads, cities, and some points of interest outside your selected data region will be shown on the map and you’ll be able to receive guidance as you drive anywhere in the U. S.

Check Download Favorites to download your Favorites list from the Trip Planner window on your desktop along with map data. These addresses will then be available as Favorites for trip entry on the Smartphone.

RECOMMENDED OPTION: It is recommended that you leave Create QuickStart checked (see below for a description of this feature), but you

may uncheck it if you don’t want the QuickStart copied with your download.

CoPilot QuickStart

Application Download

Each time you download data, CoPilot gives you the option to download a complete, ready-to-use “QuickStart” version of CoPilot along with the data. Having the QuickStart version on your mobile device ensures that CoPilot will be available even if you experience technical problems with your Smartphone and need to perform a hard reset. (During a hard reset, all installed applications are deleted from the Smartphone.) The

QuickStart version will automatically install CoPilot after a hard reset, and your map data will already be there!

To run the QuickStart application on your mobile device after a hard

reset, simply turn on your Smartphone. CoPilot will automatically begin installation.

The QuickStart option can be turned on or off in the final step of the download process (see above). By default this option is active and

the QuickStart download will be executed each time you download map data.

The QuickStart needs 10 MB of space on your Storage Card. Once the QuickStart has been copied, you can save time the next time you download data by unchecking the Create QuickStart option in the final Data Download Wizard screen before proceeding to download. You will also want to uncheck this option if you do not have enough room on your Storage Card for it.

If the QuickStart is copied onto your Storage Card and you need to remove it, simply delete the folder that contains it. The folder will be named “2577”.

POI Download Options

When you download a data region, youl get all roads within that region. Also included are regional points of interest (POI) such as gas stations, hotels, restaurants, visitor attractions, etc.

CoPilot now lets you control the number and types of POI that get downloaded along with map data. You can save space on your Smartphone by eliminating categories of POI that you’re not interested in seeing.

To select which POI categories you want, choose POI Download Options from the Edit menu in the desktop application or, when you first open the Data Download Wizard, click the Options button in the Wizard. Check the categories you wish to select (click the plus sign next to each category to see the included sub-categories).

Click Save Settings to save the set of categories you create. Click Restore Default to return to CoPilot’s default categories.

- 21 -

- 22 -

Trip Transfer

When you use the Trip download option, CoPilot transfers whole trips to your Smartphone . The trip you create, including its Itinerary, is transferred along with the surrounding data corridor, and it becomes the current trip.

The Trip download option creates a .TRP file that is placed in the Save directory in the CoPilot installation folder on your Smartphone. Subsequent downloads will add more .TRP files to this folder. The number of trips that may be stored is limited only by the available memory on your Smartphone. If multiple trips are downloaded, the last one to be added will open as the current trip. Use the Saved Trip stop entry option on your Smartphone to open stored .TRP files.

+ 30 hidden pages

ALK Technologies CoPilot Truck User Manual

Specifications and Main Features

Frequently Asked Questions

User Manual