When installing the
Alfresco
™ Pizza Oven as a built-in unit, careful consideration to the materials
used must be made. As a general rule, the materials and construction methods should be the same
as the requirements for an outdoor fireplace while maintaining all local building codes.
Dimensions shown below should be used as a reference for design and planning only.
TOP SECTION MUST BE
VENT CAP
6"Ø TYPE B
(INCLUDED)
AXE-PZA-BI WITH
BUILT-IN CONFIGURATION
WALL THICKNESS
VARIABLE DEPENDING
ON MATERIALS USED
DOUBLE
WALLED
TYPE-B
GAS VENT
6"Ø x 12" L
(INCLUDED)
30 1/4"
RAIN-PROOF AND ALLOW
FREE EXHAUST VENT
AIRFLOW
1/2" ~ 3/4" MAX.
TO EXPOSE
FRONT FASCIA
FRONT COVER
MATERIALS
PROVIDED BY
CUSTOMER
CUTOUT
TEMPLATE
ON PAGE 3
AXE-30 ACCESS
DOOR
(OPTIONAL)
FOR SERVICE
AND STORAGE
EXISTING
GAS LINE
VALVE AND FLEX HOSE
(OR RIGID) PIPING BY
CUSTOMER)
27"
MIN.
DEPTH
2"
LEDGE
18 1/2"
27 1/4"
115 VAC POWER
REQUIRED
GFCI RECOMMENDED
33"
MININUM
HEIGHT
2"
LEDGE
27 1/16"
MINIMUM HEIGHT FOR A
HEARTH LEVEL OF 36"
FROM FINISHED FLOOR
HEIGHT
VARIABLE
PER
CUSTOMER
DESIGN
SPECIFICATIONS:
BTUH = 35,600
FUEL NG @ 5 W.C. / LP @ 10 W.C.
ELECTRICAL POWER: 115 VAC / 0.3 A / 60 Hz.
GAS CONNECTION = 1/2" NPT (NG) OR 3/8" ODF (LP)
THE INFORMATION CONTAINED IN THIS DRAWING IS THE
SOLE PROPERTY OF SUPERIOR EQUIPMENT SOLUTIONS
INC. ANY REPRODUCTION IN PART OR AS A WHOLE
WITHOUT WRITTEN PERMISSION FROM SUPERIOR
EQUIPMENT SOLUTIONS, INC. IS PROHIBITED.
SUPERIOR EQUIPMENT SOLUTIONS
1085 BIXBY DRIVE
CITY OF INDUSTRY, CA. 91745
LAST SAVED BY: »» Adrian «« Thursday, October 17, 2019 8:33:36 AM
DRAWN BY:
CREATED:
5/17/2013 10:28:15 AM
ADRIAN CRISCI
ACCESS OPENING TO SERVICE
THE UNIT FROM BELOW IS REQUIRED
(DIMENSIONS SHOWN FOR AB-30 DOOR INSTALLED AS OPTIONAL EQUIPMENT)
PROJECT TITLE:
AXE-PZA-BI
DRAWING TITLE:
DRAWING NO.:
SHEET 2 OF 3
AXE-PZA-BI SPEC SHEET
AXE-PZA-BI BUILT-IN UNIT - INSTALLATION GUIDELINES
30 1/4"
28 1/8"
TYPICAL ENCLOSURE
CONSTRUCTION
NOTE: THESE CUTOUT DIMENSIONS
ARE GIVEN FOR A TIGHT 1/16" GAP
AROUND THE FRONT OF THE OVEN.
ADJUST ACCORDINGLY DEPENDING
ON MATERIALS USED.
TYPICAL OPENING FOR
AXE-30 ACCESS DOOR
(SEE PAGE 2)
3 1/16" 3 1/16"
18 1/2"
2" 2"
2 5/8"
MINIMUM OPENING
TO SLIDE IN OVEN
33"
AND TO ALLOW
8 7/8"
ROOM TO ATTACH
FLUE COMPONENTS
9"
MINIMUM HEIGHT
27 1/16"
REQUIRED FOR A
HEARTH LEVEL OF
36" FROM FINISHED
FLOOR.
SUPERIOR EQUIPMENT SOLUTIONS
1085 BIXBY DRIVE
CITY OF INDUSTRY, CA. 91745
LAST SAVED BY: »» Adrian «« Thursday, October 17, 2019 8:33:36 AM
27 1/4"
THE INFORMATION CONTAINED IN THIS DRAWING IS THE
SOLE PROPERTY OF SUPERIOR EQUIPMENT SOLUTIONS
INC. ANY REPRODUCTION IN PART OR AS A WHOLE
WITHOUT WRITTEN PERMISSION FROM SUPERIOR
EQUIPMENT SOLUTIONS, INC. IS PROHIBITED.
DRAWN BY:
CREATED:
ADRIAN CRISCI
5/17/2013 10:28:15 AM
3"
GROUND OR FINISHED
FLOOR
PROJECT TITLE:
AXE-PZA-BI
DRAWING NO.:
SHEET 3 OF 3
AXE-PZA-BI SPEC SHEET
DRAWING TITLE:
AXE-PZA-BI BUILT-IN UNIT - INSTALLATION GUIDELINES
Loading...