Alfresco AXE-36E User Manual

FOR ISLAND CUTOUT DIMENSIONS,

SHELF AND SHELF
SUPPORT BRACKETS
(INCLUDED WITH
ENCLOSURE)

FASTENERS TO BE
SUPPLIED BY
INSTALLER

AXE-36E

INSTALLATION

SEE AXE DOOR - SPEC SHEET

21 1/2”

AXE-36 DOOR

AXE-36E ENCLOSURE ISLAND BY OTHERS

ASSEMBLY

INSTRUCTIONS:

1. REMOVE THE SHELF AND THE SHELF BRACKETS FROM INSIDE THE ENCLOSURE (BRACKETS CAN ONLY
BE INSERTED OR REMOVED FROM WITHIN THE ENCLOSURE).

2. INSERT THE DOOR ASSEMBLY INTO THE ENCLOSURE SO THAT THE FRONT OF THE ENCLOSURE FITS
FLUSH TO THE BACK OF THE VERTICAL FACE OF THE DOOR FRAME.

3. INSERT THE ENCLOSURE INTO THE ISLAND UNTIL THE BACK EDGE OF THE DOOR FRAME BUTTS UP TO
THE FRONT FACE OF THE ISLAND (IT MAY BE NECESSARY TO BUILD SOME RAILS TO SUPPORT THE
ENCLOSURE, PREVENTING IT FROM ROTATING DOWNWARD AT THE BACK).

4. SECURE ENCLOSURE IN PLACE WITH SUITABLE FASTENERS THROUGH THE PROVIDED HOLES OR
SLOTS (HOLES AND SLOTS WILL ALIGN IF THE DOOR HAS BEEN INSTALLED CORRECTLY).

5. INSERT THE SHELF SUPPORT BRACKETS AT THE PREFERRED HEIGHT, AND THEN INSERT THE SHELF.