Alfresco AWS-30, AWS-36, AWS-42 Installation Manual

AWS-30, AWS-36, AWS-42 & AWS-56

WIND SHI ELD IN STALLATION

NOTES:

 WOOD BLOCKS MAY BE USE TO ASSIST IN

LIFTING AND SUPPORTING THE BBQ WHILE
PLACING WIND SHIELD UNDER THE BBQ
PERIMETER RING (SEE PIC. 2)

 WIND SHIELD USES 90 DEG UP FLANGE’S
ON 3 LOCATIONS TO LOCK UNDER THE BBQ.
(ONLY 2 LOCATIONS FOR THE AWS-30)

 OUTER FLANGE’S MUST FIT ON THE OUTSIDE

OF BBQ PERIMETER RING (SEE PIC.4)

 INSIDE FLANGE’S MUST FIT ON THE INSIDE

AND UNDER THE BBQ PERIMETER RING

(SEE PIC.3)

WIND SHIELD

UP 90 FLANGE TO FIT
INSIDE OF BBQ PERIMETER
RING (SEE PIC 3)

ALFRESCO WIND SHIELD

UP 90 FLANGE TO FIT OUTSIDE

OF BBQ PERIMETER RING

(SEE PIC 4)

LIFT BBQ FROM ONE SIDE AT A TIME AND PLACE WIND
SHIELD UNDER THE BBQ PERIMETER RING

INSERTING OUTER UP 90
FLANGE INSIDE OF BBQ
PERIMETER RING

PIC. 1

BBQ PERIMETER

RING

WOODEN BLOCK MAY BE USE

TO SUPPORT BBQ

PIC. 2

REAR

BOTTOM

VIEW

PIC. 3

OUTER UP 90 FLANGE IS OUTSIDE AND
AGAINST BBQ PERIMETER RING AS SHOWN

Last revised: MARCH 16, 2015

PIC. 4