Alfresco AWS-30C, AWS-36C, AWS-42C, AWS-56C Installation Manual

AWS-30C, 36C, 42C AND 56C

Alfresco Cart Model - Wind Shield Installaon

TOOLS & HARDWARE REQUIRED FOR INSTALLATION:

ITEM DESCRIPTION: PART # QTY:

A SCREW 10-32 x 1/2" - FLAT

HEAD 82° - PHILIPS - SS

B SCREW 10-32 x 1 1/2" - FLAT

HEAD 82° - PHILIPS - SS

C # 2 PHILIPS SCREWDRIVER N/A -

REMOVE: 8 PCS

· ITEM - A

ADD NEW: 8 PCS

· ITEM - B

NEED:

· ITEM - C

STEP 1:

Start by removing the SIDE SHELVES

of the cart (as shown on Figure 1)

NOTE: NO TOOL’S are REQUIRED

STEP 2:

Remove Item - A, using a Philips

200-0326 8

(exisng)

200-0397 8

A

C

B

REMOVE EXISTING
SCREWS AT FRONT
& REAR BRACKETS

REAR PANEL

LEFT PANEL

RIGHT

PANEL

Figure #1

SIDE SHELF

RT SIDE PANEL

screwdriver (as shown on Figure 2)

STEP 3:

Attaching the Wind Shield: Locate the

RT Side or the LT Side Panel first to BBQ,

using new screws described as item B

(as shown on Figure 3)

STEP 4:

Attaching the Rear Panel:

NOTE: NO TOOL’S are REQUIRED to attached the

rear panel.

Locate the Rear Panel by inserting the hook-shaped

tabs (see Figure 4) into the slots in each of

the Side Panels. Make sure the Rear Panel it’s pushed

all the way down, ensuring secure attachment.

STEP 5:

Re-attach side shelves.

A

Figure #2

rear panel

This view without side shelf

Figure #4

4 mounng
hook’s shape
tabs on each
side of rear
panel

B

B

Figure #3

NEW SCREWS

Side panel inside view

This view as shown with com-

pleted side shelf installaon