Alfa V71 User Manual

Catalog #V71

welcomes you...

… to our growing family of Foodservice & Hospitality Professionals. Since 1938, ALFA International’s name has been synonymous with a wide and unique selection of high quality foodservice products, competitive prices and prompt delivery services. Our commitment

is supported by a professional staff and our Corporate Mission Statement. “We are dedicated

to providing Quality Products to our customers with the highest level of knowledgeable, courteous & efficient Customer Service possible”. We trust that this product catalog will prove to be an informative resource in helping you meet your customer’s needs. We look forward to each and every opportunity to be of service to you and we sincerely appreciate your patronage.

ALFA InternatIonal Headquarters

Visit ALFA International on the web at www.alfaco.com or contact us with

your foodservice inquiries by writing to salesandservice@alfaco.com

Supports and is a proud member of these industry organizations...

Supplier to the following Foodservice associations

4 Kaysal Court Armonk, NY 10504

www.alfaco.com salesandservice@alfaco.com

800.327.ALFA

914.273.2222

800.328.ALFA Fax

914.273.3666 Fax

NEW EQUIPMENT for 2009

Meat Slicerss page 1

Food Processor page 6

MC12 Meat Grinder page 7

CAS Scales pages 18-19

Panini Grills page 9

MC5 Meat Grinder page 26

Vacuum Packing Machines page 5

Immersion Mixers page 8

Nirey Knife Sharpeners pages 24-25

Cold/Frozen Drink Dispensers pages 16-17

Hard Cheese Graters page 10

Heat Seal Equipment pages 2-3

Heat Seal Parts page 4

KitchenAid Equipment pages 12-13

Soup Warmers page 21

Electric Juicers page 14

Food Warmers page 20

Wheat Grass Juicer page 26

Coffee makers page 22

Rice Cooker page 23

914.273.2222 / 800.327.ALFA (2532) www.alfaco.com Fax 914.273.3666 / 800.328.ALFA (2532)

TABLE OF CONTENTS

Catalog #V71

More Than 350 new items have been added to our Catalog!

EQUIPMENT – TAB 1

PAGE

SIRMAN MEAT SLICERS NEW!!! 1 HEAT SEAL EQUIPMENT, PARTS & PVC FILM NEW!!! 2 - 4 VACUUM PACKAGING MACHINES NEW!!! 5 SIRMAN FOOD PROCESSOR NEW!!! 6 MC12 MEAT CHOPPER / GRINDER & POWER BASE NEW!!! SIRMAN IMMERSION MIXERS SIRMAN PANINI GRILLS NEW!!! 9 SIRMAN & FAMA HARD CHEESE GRATERS NEW!!! 10 MANUAL CHEESE CUTTERS 11 KITCHENAID MIXERS, ATTACHMENTS & ACCESSORIES NEW!!! 12 - 13 ELECTRIC JUICERS NEW!!! 14 MANUAL JUICERS 15 ELMECO COLD / FROZEN BEVERAGE DISPENSERS NEW!!! 16 - 17 CAS COMMERCIAL SCALES NEW!!! 18 - 19 FOOD WARMERS 20 SOUP WARMERS NEW!!! 21 COFFEE MAKERS NEW!!! 22 RICE COOKER NEW!!! 23 TABLE TOP HOT PLATES 23 NIREY KNIFE SHARPENERS 24 - 25 MC5 MEAT CHOPPER / GRINDER 26 WHEAT GRASS JUICER NEW!!! 26

ACCESSORIES & TOOLS – TAB 2

GS/VS - GRATER / SHREDDER / SLICER UNIT EXPLODED VIEW OF COMPONENTS 27 GS-12 / VS-12 GRATER / SHREDDER POWER ATTACHMENTS 28 - 29 GS GRATER / SHREDDER PLATE (DISC) CROSS REFERENCE GUIDE 30 MEAT CHOPPER / GRINDER & TENDERIZER ATTACHMENTS NEW!!! 31 MANUAL MEAT CHOPPERS 32 PLASTIC STOMPERS 32 CHOPPER COMPONENTS 33 STUFFING TUBES 33 CHOPPER KNIVES & PLATES NEW!!! 34 - 35 CHOPPER KNIFE & PLATE CROSS REFERENCE GUIDE 36 GRINDER PLATE & KNIFE TIPS 37 ROBOT COUPE STAINLESS STEEL BLADE ASSEMBLY 37 MANUAL MEAT TENDERIZERS – SIRMAN & JACCARD NEW!!! 38 SAUSAGE STUFFERS – SIRMAN NEW!!! & ALFA 39 HOBART MIXER BOWLS & AGITATORS 40 - 41 HOBART LEGACY MIXER BOWLS & AGITATORS – OEM NEW!!! 42 UNIVEX MIXER BOWLS & AGITATORS – OEM 43 POLY MIXER BOWLS & AGITATOR APPLICATIONS 44 PATTY PRESSES – SIRMAN & ALFA NEW!!! 45 FRENCH FRY CUTTERS 46 STAINLESS STEEL MANDOLINE 46 EDLUND CAN OPENERS 47

Note: Please reference and include your 6 character alphanumeric customer Account Number when placing orders via fax, phone and/or web.

NEW!!!

7

ACCESSORIES & TOOLS – TAB 2 Continued PAGE

HEAVY DUTY SALAD SPINNERS NEW!!! 47 HAND HELD MEAT SAWS 48 MANUAL MEAT TENDERIZER NEW!!! 48 HAND TOOLS 49 - 50 SAFETY GLOVES & APRONS 51

8

PORTABLE BUTANE STOVE NEW!!! 52 ICE CRUSHER & WINE RACK 52

FOOD EQUIPMENT PARTS – TAB 3

SLICER BLADES & SAFETY COVERS 53 - 54 SLICER SHARPENING & TRUING STONES 55 SLICER CLEANING TOOL NEW!!! 55 LUBRICANTS – SUPER LUBE & HAYNES NEW!!! 56 - 57 PARTS FOR HOBART BAKERY MIXERS 58 - 63 PARTS FOR HOBART MIXERS 64 BAKERY OPERATION & SERVICE TIPS 64 PARTS FOR BERKEL SLICERS 65 - 70 PARTS FOR GLOBE SLICERS 71 - 79 PARTS FOR GLOBE CHEFMATE SLICERS NEW!!! 80 PARTS FOR HOBART SLICERS 81 - 84 PARTS FOR HOBART 2000 SERIES SLICERS NEW!!! 85 MEAT BAND SAW BLADES NEW!!! 86 BAND SAW BLADE CROSS REFERENCE GUIDE 87 STAINLESS STEEL GRASSELLI SLICING BLADES 87 PARTS FOR BIRO BAND SAWS 88 - 90 PARTS FOR BUTCHER BOY BAND SAWS 90 - 91 PARTS FOR HOBART BAND SAWS 92 - 95 PARTS FOR HOBART CUTTER / MIXER 96 PARTS FOR HOBART FOOD CUTTERS 96 - 97 PARTS FOR HOBART VCM NEW!!! 98 PARTS FOR HICKORY ROTISSERIES 99 BLADES & PARTS FOR BERKEL & JAC BREAD SLICERS NEW!!! 100 OLIVER BREAD SLICER BLADES & INSTRUCTIONS 101 PARTS FOR BERKEL TENDERIZERS 102 PARTS FOR HOBART TENDERIZERS 102 PARTS FOR BIRO TENDERIZERS 103 PARTS FOR HOLLYMATIC PATTY PRESS MACHINES SCHERMER CAPTIVE-BOLT STUNNERS 106 SCHERMER CAPTIVE-BOLT STUNNER PARTS 107 - 109 SCHERMER ELECTRIC HOG STUNNERS NEW!!! 110 SCHERMER SPRAYS 111 PARTS FOR SCHERMER SPRAYS 112 KAWE CATTLE PROD NEW!!! 112 SALES POLICIES 113 CREDIT APPLICATION FORM 114 SHIPPING INFORMATION 115 RETURN INSTRUCTIONS 116 ORDER FORM 117

ALFA

EXCLUSIVE

Indicates that Alfa is the Exclusive Importer or Supplier of these items.

104 - 105

Order on-line at www.alfaco.com

Note: Many of our parts are original equipment manufacturer items. Globe, Berkel, Hobart, Lan Elec, Fleetwood, Butcher Boy, Hickory, Hollymatic, T&S, Fama, Edlund, Heat Seal, Biro and Schermer are registered trademarks of their respective companies. Alfa is not affiliated with any of these firms.

914.273.2222 / 800.327.ALFA (2532) www.alfaco.com Fax 914.273.3666 / 800.328.ALFA (2532)

!!

MEAT SLICERS

Made In

NEW

Model l370

odel P330

M

odel lX350

Italy

M

odel G350a Model G350

ALFA carries a wide selection of Commercial Meat Slicing Equipment to ﬁt every budget and culinary need. Designed in Italy for ALFA International, our slicers are designed to meet the demands of Meat Processing Plants, Supermarkets, Hotels, Restaurants, Butcher Shops, Delicatessens, Commissaries, Country Clubs, Caterers, Kiosks and home use. All of our slicers come with fan cooled motors (except ALFA Models LX350, T220 & T250), safety shrouds for all electrical components and an “Interlock Safety” feature. We stock “gravity feed, vertical & automatic” Meat Slicing equipment with blade sizes from 9 –15 inches. We offer additional models and styles of slicers which are equipped with additional capabilities & features that are not detailed below. Call one of our Customer Service Representatives for product speciﬁcations, features, availability, cost and details regarding special orders. Special Orders will not result in longer Delivery & Shipping schedules.

Warranty: 1 year parts & labor

Net & ShippiNg AlfA # DeScriptioN Motor electricAl Weight DiMeNSioNS

ALFA LX350 14" Vertical/Manual Fly Wheel Manual N/A 200 lbs./220 lbs. 35-7/8" x 30-3/4" x 22" ALFA L370 15" Vertical/Belt Driven 0.5 HP (368W) 120V-60HZ-3.1A 120 lbs./162 lbs. 29-5/16" x 28-1/2" x 24-1/64" ALFA L350 15" Vertical/Belt Driven 0.5 HP (368W) 120V-60HZ-3.1A 120 lbs./163 lbs. 29-1/8" x 28-3/8" x 23-5/8" ALFA G350A 14" Semi-Automatic/Belt Driven 0.4 HP (290W) 120V-60HZ-3.4A 121 lbs./163 lbs. 28-3/4" x 28-13/46" x 28-3/4" ALFA G350 14" Gravity Feed/Belt Driven 0.4 HP (290W) 120V-60HZ-3.4A 110 lbs./152 lbs. 28-3/4" x 29-1/8" x 27-1/2" ALFA P330A 13" Semi-Automatic/Belt Driven 0.4 HP (290W) 120V-60HZ-3.4A 111 lbs./156 lbs. 25-13/32" x 26" x 25-5/8" ALFA P330 13" Gravity Feed/Belt Driven 0.4 HP (290W) 120V-60HZ-3.4A 79 lbs./110 lbs. 24-3/16" x 26-3/16" x 24-1/4" ALFA P300 12" Gravity Feed/Belt Driven 0.4 HP (275W) 120V-60HZ 77 lbs./88 lbs. 24-1/4" x 21-1/2" x 21-1/2" ALFA M300 12" Gravity Feed/Belt Driven .25 HP (160W) 120V-60HZ 46 lbs./57 lbs. 25-3/16" x 24" x 16-1/2" ALFA M250 10" Gravity Feed/Belt Driven .20 HP (125W) 120V-60HZ 40 lbs./49 lbs. 22-7/16" x 22-1/16" x 14-9/16" ALFA M220 9" Gravity Feed/Belt Driven .20 HP (125W) 120V-60HZ 37 lbs./48 lbs. 22-7/16" x 22-1/16" x 14-9/16" ALFA G300 12" Gravity Feed/Belt Driven .33 HP (210W) 120V-60HZ 68 lbs./82 lbs. 25-1/2" x 25-1/4" x 16-1/8" ALFA T250 10" Gravity Feed/Belt Driven .20 HP (125W) 120V-60HZ 34 lbs./43 lbs. 20-1/4" x 16-1/8" x 14-3/16" ALFA T220 9" Gravity Feed/Belt Driven .20 HP (125W) 120V-60HZ 29 lbs./37 lbs. 21-5/8" x 16-1/8" x 13-13/16"

odel l350

M

914.273.2222 / 800.327.ALFA (2532) www.alfaco.com Fax 914.273.3666 / 800.328.ALFA (2532)

1

HEAT SEAL WRAPPERS

The industry standard for film wrapping food packaging for the past 65 years. These units are made of heavy duty components to withstand years of use and have many features not found on other wrappers.

Table Top Models

Features oF tHe 500a / 600a

• Solid state controlled film cutoff rod

• Thermostatically controlled 6" x 15" hot

plate with non-stick, replaceable Teflon® cover

• Heavy gauge aluminum base

Model 500a

OptiOns

• 12 hour timer

• 220 volt power supply

DimensiOns

• 17" D x 23-1/4" W x 9-3/4" H

Sales Tip: We recommend the above Roller Mounted Wrappers when film roll sizes are changed frequently.

Model 625a

Our MOst POPular MOdel

OptiOns

• 12 hour timer

• 8" x 15" hot plate with

belly guard

• Model 50 stan

• 220 volt power supply

• Aluminum and Stainless Steel construction

• Stainless Steel wrapping surface

• Large rubber feet

Features oF tHe 625a / 625-a MInI

• Solid state controlled film cutoff rod

• Thermostatically controlled 6" x 15" hot

plate with non-stick, replaceable Teflon® cover

• Heavy gauge aluminum base

• Aluminum and Stainless Steel construction

• Stainless Steel wrapping surface

• Large rubber feet for stability

• Available in 2 roll (825A) and 3 roll (875A)

• Factory Warranty: 3 Months

odel 600a

M

OptiOns

• 12 hour timer

• 8" x 15" hot plate with

belly guard

• Model 50 stand

• 220 volt power supply

DimensiOns

• 26" D x 22-1/2" W x 5" H

Model 625-a MInI

• Smaller version of the most popular

wrapper, the 625A, with the same features in a more compact and convenient size

• Ideal for wrapping small packages

such as sandwiches and cheese

Sales Tip: We recommend the above Axle Mounted Wrappers when film rolls of only one size are being used.

MAx filM electricAl AlfA # hot plAte Size DiMeNSioNS WiDth requireMeNt Weight

500A 6" x 15" 17" D x 23-1/4" W x 9-3/4" H 18" 115 V 18 lbs. 500A MINI 6 600A 6 625A 6 625A MINI 6

NOTE: ALFA now carries Heat Seal PVC Film on page 3. Heat Seal Equipment is sold without film.

914.273.2222 / 800.327.ALFA (2532) www.alfaco.com Fax 914.273.3666 / 800.328.ALFA (2532)

2

" x 15" 17" D x 15" W x 9-3/4" H 12" 115 V 14 lbs. " x 15" 26" D x 22-1/2" W x 5" H 20" 115 V 30 lbs. " x 15" 26" D x 22-1/2" W x 9" H 18" 115 V 20 lbs.

" x 9" 21" D x 15" W x 5" H 13" 115 V 20 lbs.

Features oF tHe 825a / 875a

• Solid state controlled film cutoff rod

• Thermostatically controlled 6" x 15" hot

plate with non-stick, replaceable Teflon® cover

• Heavy gauge aluminum base

• Aluminum and Stainless Steel construction

• Stainless Steel wrapping surface

• Large rubber feet for stability

• Model 825A: 2 roll capacity Model 875A: 3 roll capacity

MAx filM electricAl AlfA # hot plAte Size DiMeNSioNS WiDth requireMeNt Weight

NEW!! NEW!!

Floor Model

with Optional Wings

825A 6" x 15" 26" D x 22-1/2" W x 9" H 18" 115 V 50 lbs. 875A 6 104A 8 107A 8

104A

HEAT SEAL WRAPPERS

" x 15" 26" D x 22-1/2" W x 9" H 18" 115 V 55 lbs. " x 15" 26" D x 25" W x 38" H 20" 115 V 65 lbs. " x 15" 26" D x 23" W x 3" H 20" 115 V 65 lbs.

104a/107a Features

• Solid state controlled film cut-off rod

• 8" x 15" thermostatically controlled hot plate

with non-stick, replaceable Teflon® cover

• Heavy gauge welded aluminum frame

• Aluminum and Stainless Steel construction

• Stainless Steel wrapping surface

• Adjustable foot pads for easy leveling on

uneven floors

• 3 roll capacity

• Easy to use film selector feature

• Adjustable film tension

• Available in extended widths - 24", 30" and 36"

• Shipped direct from factory via truck – 65 lbs.

• 725 watts

104a/107a oPtIons

• 12 hour timer

• All Stainless Steel construction (S104A)

• 115 volts, 6.5 amps, 60 cycle

• Stainless Steel wings (W24ST), 24" W x 14" D

• Accessory storage rack (ASR) 22" W x 14" D x 12" H

• Label dispensers (various sizes available)

with Splash Shield

NEW!!

875A

107A

Floor Model

NOTE: None stock Heat Seal Wrapper Equipment is only a phone call away.

NEW!!

MeAt, poultry, fiSh & proDuce filM

High Oxygen Transmission rate allows product to bloom, stay tender and look appetizing in the case. Best selling meat film in the world.

AlfA # DeScriptioN Size

HSMF-12 Resinite Stretch Film 12" W x 5000' L HSMF-18 Resinite Stretch Film 18 "W x 5000'

914.273.2222 / 800.327.ALFA (2532) www.alfaco.com Fax 914.273.3666 / 800.328.ALFA (2532)

PVC FIlM For Heat seal MaCHInes

L

Akery, cheeSe & Deli filM

B

Controlled shrink film that will not squeeze packaged goods. The most effective film in the industry – outperforms competitors 3 to 1.

AlfA # DeScriptioN Size

HSBF-12 Resinite Shrink Film 12" W x 3500' L HSBF-18 Resinite Shrink Film 18" W x 3500'

L

3

HEAT SEAL WRAPPER PARTS

HS3005

HS1821 HS1823

HS6113

HS3010

HS6114 HS6375

HS6140 HS6305

HS1879

Genuine HEAT SEAL Components

AlfA # heAt SeAl # DeScriptioN

HS1824

HS1872

fitS MoDelS

HS1818

0

1

2

0

2

A

HS1881

1

0

4

7

A

HS6301 HS6368

HS6101 HS6102

HS6110

1

5

1

0

2

0

A

M

i

N

i

HS1818 1818-001 Circuit Board x x x x x x x x x x x HS1821 1821-002 1 Amp Fuse

x x x x x x x x x

HS1823 1821-013 Fuse Holder x x x x x x HS1824 1824-011 Hot Rod 23

" x x x x x x HS1832 1836-002 Red Rectangular Pilot Light x x HS1836 1836-004 Round Red Pilot Light x x HS1872 1872-008 Toggle Switch x x HS1879 1872-009 Lighted Rocker Switch x HS1881 1881-002 Thermostat x x x x x x x x x x x HS2145 2145-005 Thermostat Knob x x x x x x x x x x x HS3005 3005-004 Film Core Axle x HS3010* 3010-016 "D" Ring Film Retainer x HS3047 3005-047 Film Core Axle x x HS5901 5901-011 Teflon Cover 6" x 15" x x x x x HS5902 5901-014 Teflon Cover 6 HS5903 5901-001 Teflon Cover 8 HS5905 5901-002 Teflon Cover 9

" x 9" x x " x 15" x x " x 12"

TT-912 Hot Plate

HS6101 6101-020 Hot Plate Kit - 6" x 15" x x x x x HS6102 6102-043 Hot Plate Kit - 8" x 15" OEM x x HS6110 6110-016 Heating Element 6" x 15", 8" x 15" x x x x x x x x HS6113 6110-023 Core End Cap Set (2) x x x HS6114 6305-018 Bearing Block Set (2004 on) x x x x x x x x HS6140 6110-040 Seal Plate Wire Harness Kit x x HS6301 6301-047 Roller Assembly x HS6305 6305-041 Seal Plate Wire Harness Kit x x x x x x HS6368 6305-068 *Roller Assembly Kit x HS6375 6305-075 Bearing Block Set (pre 2004) x x x x x x x x HS6504 6504-022 Heating Element 6

" x 9" x x

* Available while

current stock lasts.

AlfA # hoBArt # DeScriptioN hWS-3 hWS-4

HS5904 3345687 Teflon Cover 6” x 14” x x

teFlon CoVers For Hobart sealers

HS3047

HS1832

HS1836

HS5901 / HS5902 HS5903 / HS5904

HS5905

HS2145

HS6504

6

8

0

2

0

5

A

8

2

0

5

0

A

M

i

N

i

8

5

2

0

5

5 A

8

7

5

5 A

914.273.2222 / 800.327.ALFA (2532) www.alfaco.com Fax 914.273.3666 / 800.328.ALFA (2532)

4

VACUUM PACKAGING / SEALING EQUIPMENT

ALFA PRO130

!!

NEW

ALFA

VP215

ALFA

VP320

ALFA offers a complete range of Vacuum Packaging Equipment for home and commercial use, utilizing VACUUM & CHAMBER

equipment on the market, which is how to vacuum package liquids and liquid-rich foods sucessfully. Competitor’s commercial products are "suction machines", meaning air is sucked out of the bag and the bag is then sealed. Along with air, liquids are also sucked out of the bag, leading to "partial or failed" seals. Our products use a different technology to eliminate this problem. When sealing with our "CHAMBER" equipment, the vacuum bag to be sealed is placed inside of the chamber of the machine and the lid is then closed. The air is then vacuumed out of the "entire chamber", not just the bag or pouch, allowing the air pressure on the inside & outside of the bag to remain equal and ensuring liquids will remain in their bag/pouch. Once this procedure is completed the bag is then sealed. Chamber machines also provide higher vacuum levels (hg), versus suction machines. Our chamber machines work with commercial vacuum pouches, called "barrier" bags/pouches. These bags eliminate bag "respiration", preventing air from re-entering the vacuum bag over time. These barrier bags allow users to attain the beneﬁts of longer shelf life* with less or no freezer burn and are more economical than other vacuum bags currently on the market. Food products like fresh meats, ﬁsh, soups, stews, sauces, marinated vegetables & meats are no longer a problem to vacuum package quickly, easily and in a mess-free environment without collateral waste.

Warranty: 1 year parts & labor (excluding ALFA PRO130 - Warranty: 6 months)

* Extended Product Shelf Life requires immediate refrigeration and is based on proper handling and equipment operation.

NOTE: We carry a full line or Barrier Pouch Bags for every application in 4 different thicknesses and 60 different sizes. Please call for details.

# of SeAl BArS VAcuuM electricAl gAS Net Ship DiMeNSioNS AlfA # chAMBer Size SeAl BAr leNgth puMp SpecS fluSh Weight Weight uNBoxeD / BoxeD

ALFA Table Top Suction (1) 12" Seal Bar Dual 110V - 50Hz N/A 10 lbs. 14 lbs. 18.25" x 8.75" x 4.75" PRO130 Machine Piston Pump 2 A - 220 W 20" x 7.25" x 14"

ALFA Non Vacuum (1) 16" Seal Bar N/A 110V - 60Hz N/A 40 lbs. 42 lbs. 17.5" x 12" x 9" IBS16 Bag Sealer 8 A - 880 W 24.75" x 17.75" x 13"

ALFA 11.25" x 15.25" x 5" (1) 10.25" Seal Bar Dry Rocker 110V - 60Hz N/A 72 lbs. 83 lbs. 20" x 14" x 15" VP210 Piston 4.2 A - 462 W 24.5" x 19" x 19"

ALFA 11.25" x 15.25" x 5" (1) 10.25" Seal Bar 1/4 HP 110V - 60Hz N/A 84 lbs. 95 lbs. 20" x 14" x 15" VP215 Rotary Oil 4.2 A - 462 W 24.5" x 19" x 19"

ALFA 16.75" x 18" x 7" (1) 16" Seal Bar 1.5 HP 110V - 60Hz N/A 205 lbs. 248 lbs. 22.25" x 20" x 19" VP320 13 A - 1300 W 24.5" x 26.25" x 26"

ALFA 17.25" x 16.5" x 7" (2) 16" Seal Bars 1.5 HP 110V - 60Hz Yes 245 lbs. 297 lbs. 20.75" x 19.75" x 40" VP325 13 A - 1300 W 24.5" x 26" x 45"

ALFA 21.25" x 20.75" x 7" (2) 20" Seal Bar 1.5 HP 110V - 60Hz N/A 315 lbs. 350 lbs. 25" x 24" x 41" VP540 13 A - 1300 W 29.25" x 30.5" x 46"

ALFA 21.25" x 20.75" x 7" (2) 20" Seal Bar 1.5 HP 110V - 60Hz Yes 315 lbs. 350 lbs. 25" x 24" x 41" VP545 13 A - 1300 W 29.25" x 30.5" x 46"

ALFA 28.5" x 35" x 7.5" (4) 28" Seal Bar 5 HP 220V - 50/60Hz Yes 905 lbs. 980 lbs. 72" x 27" x 45" VP728 10 A - 2200 W 76" x 33" x 50"

ALFA 37" x 41" x 10" (4) 34" Seal Bar 7.5 HP 220V - 50/60Hz Yes 1586 lbs. 1661 lbs. 89.5" x 42" x 48.5" VP734 10 A - 2200 W 88.5" x 48" x 53.5"

Technology. Our products provide two distinct advantages & solutions over non-chamber, external bag

914.273.2222 / 800.327.ALFA (2532) www.alfaco.com Fax 914.273.3666 / 800.328.ALFA (2532)

5

CONTINUOUS FEED–COMMERCIAL FOOD PROCESSOR

The ALFA 300SS is a superior commercial food service

NEW

!!

Made In

Italy

machine and is manufactured entirely of Stainless Steel and Anodized Aluminum. The absence of plastic in this unit’s construction ensures durability & reliability. The Stainless Steel impeller cover is detachable and dishwasher safe. The unit comes equipped with a 550W 3/4 HP Fan Cooled, Belt Driven Motor, affording users uninterrupted production without fear of overheating, while improving performance and extending product life. This machine has been designed for use in Hotels, Restaurants, Caterers,

Delicatessens, Snack Bars, Cafeterias, Bars/Pubs, Concession Stands and Super Markets to Slice, Dice,

Shred, Julienne and Grate a broad variety of vegetables, fruit & cheese and comes with (3) Stainless Steel food processing discs.

Safety: Equipped with a DUAL INTERLOCK SAFETY SYSTEM.

feed lever is lifted. The 2nd interlock switch disables unit activation when impeller cover is not securely in place or off.

Output: 100 - 400 lbs./hr.

Disc Speed: 300 RPM

The 1st interlock switch stops unit activation when

Warranty: 1 Year Parts & Labor

Discs: The ALFA 300SS Commercial Food Processor

offers one of the largest selections of Stainless Steel discs

ETL Electrial and ETL Sanitation Certiﬁcate listed

5-15P

in the U.S. market.

AlfA # electricAl Motor Net Weight ShippiNg Weight DiMeNSioNS

ALFA 300SS 120V / 60HZ 1P 550W / 3/4HP 44 lbs. 52 lbs. 28-3/8" x 19-3/4" x 16-3/4"

Available Discs

Grating/Shredding – DS1 (1/16"), DS2 (5/64"), DS3 (1/8"), DS4 (5/32"), DS5 (9/32"), DS6 (11/32") Slicing – SD1 (1/16"), SD2 (5/64"), SD3 (1/8"), SD4 (5/32"), SD5 (3/16"), SD6 (5/16"), SD7 (3/8"), SD8(9/16") Julienne – JD4 (5/32"), JD6 (7/32"), JD8 (5/16"), JD10 (3/8") Dicing – DD8 (5/16"), DD10 (3/8"), DD20 (13/16")

* Dicing Discs DD8, DD10, and DD20 work with Slicing Discs SD6, SD7 and SD9 only.

914.273.2222 / 800.327.ALFA (2532) www.alfaco.com Fax 914.273.3666 / 800.328.ALFA (2532)

6

MEAT GRINDER/CHOPPER

!!

NEW

The ALFA MC-12 is designed and engineered to be used by commercial food service establishments including Hotels, Restaurants, Commissaries, Butcher Shops, Country Clubs, & Delicatessens. It is suitable for consumer applications as well, including legion halls, community centers, bed & breakfasts and outdoorsmen. This grinder features a heavy duty 1 HP motor that can grind 8-12 lbs. of product per minute. The Standard #12 Hub may also accept our GS-12 (Grater/Shredder/Slicer Attachment along with our TN-12 Meat Tenderizer Attachment). The unit comes with a Stainless Steel #12 Meat Grinder Head, Worm, (2) #12 Plates (1/8" & 3/16"), (2) #12 Knives, Pan, Sausage Stufﬁng Tube & Stomper. No oil changed is required as the motor comes grease packed. The ALFA MC-12 features CE, NSF & ETL approvals.

Warranty: 1 year parts & labor.

AlfA pB-12 poWer BASe With gS-12 AttAchMeNt

See pAgeS 28 AND 29

electricAl Net Ship AlfA # DeScriptioN Motor cApAcity SpecS Weight Weight DiMeNSioNS

ALFA MC-12 Standard #12 Head 1 HP 8-12 lbs./min. 115V-60Hz 60 lbs. 66 lbs. 14" x 12" x 24" Meat Grinder 9A-750W ALFA PB-12 Power Base 1 HP N/A 115V-60Hz 48 lbs. 51 lbs. 15-3/4" x 9" x 13" 9A-750W

914.273.2222 / 800.327.ALFA (2532) www.alfaco.com Fax 914.273.3666 / 800.328.ALFA (2532)

AlfA Mc-12 poWer BASe With tN-12

teNDerizer AttAchMeNt

See pAge 31

7

Made In

Italy

Prepare soups, sauces, purees, batters, mousses, condiments and many more items, easily, efﬁciently, quickly, safely & directly in your cooking pots & mixing vessels. A highly effective and patented ventilation system prevents overheating, ensuring extended use and product life. The exclusive “drill-like” blade speed control makes operation easier while producing optimal results. The products lightweight and ergonomic design, reduces operator muscle strain & fatigue, ensuring optimum comfort and performance. A unique feed tube “bayonet” slot, reduces the time required in exchanging different length shafts and the dual head mixing whisk attachment. These highly dynamic kitchen utilities are constructed of high quality materials (highly resistant & light weight ﬁberglass ABS plastic with aluminum & steel details, Stainless Steel mixing shafts & blades), resulting in longer product life. Our insulated “double’ hull construction keeps all electrical components safe from contact with all ﬂuids and is available in 9 different models to meet your customers speciﬁc commercial mixing applications. Other features included are a “trigger” switch for continuous 2 hand operation and a safety switch & lock button which prevents accidental activations. Multiple speed controls are available, allowing the user to select “ﬁxed” & “variable” speeds based on mixing application requirements. Select from single speed, drill like speed control or patented VarioTronic™ speed control with stabilizer settings. Interchangeable 12”, 16” & 20” Stainless Steel mixing wands are available, along with a 12” dual head whisk.

Warranty: 1 Year Parts & Labor

HAND HELD IMMERSION MIXERS

NEW

!!

ETL Electrial and ETL Sanitation Certiﬁcate listed

5-15P

VAriABle SpeeDS Net ShippiNg AlfA # Motor cApAcity rpMS Weight Weight DiMeNSioNS

ALFA 700 HDV 2/3 HP / 480W 50 gallons 3,000-16,000 6.6 lbs. 8.8 lbs. 9" x 10-5/8" x 16-7/8" ALFA 500 HDV 1/2 HP / 373W 40 gallons 3,000-16,000 6.0 lbs. 8.1 lbs. 9" x 10-5/8" x 16-7/8" ALFA 305 HDV 1/3 HP / 280W 25 gallons 3,000-16,000 4.4 lbs. 7.0 lbs. 9" x 10-5/8" x 16-7/8" ALFA HD 700 2/3 HP / 480W 50 gallons 0-16,000 6.6 lbs. 8.8 lbs. 9" x 10-5/8" x 16-7/8" ALFA HD 500 1/2 HP / 373W 40 gallons 0-16,000 6.0 lbs. 8.1 lbs. 9" x 10-5/8" x 16-7/8" ALFA HD 305 1/3 HP / 280W 25 gallons 0-16,000 4.4 lbs. 7.0 lbs. 9" x 10-5/8" x 16-7/8" ALFA QT 300 1/2 HP / 300W 32 quarts 1,000-16,000 4.8 lbs. 7.0 lbs. 11-3/8" x 9" x 15-3/8" ALFA QT 230 1/3 HP / 230W 28 quarts 1,000-16,000 4.4 lbs. 6.6 lbs. 11-3/8" x 9" x 15-3/8" ALFA QT 150 1/4 HP / 150W 15 quarts 1,000-16,000 4.0 lbs. 6.2 lbs. 11-3/8" x 9" x 15-3/8"

914.273.2222 / 800.327.ALFA (2532) www.alfaco.com Fax 914.273.3666 / 800.328.ALFA (2532)

8

PANINI GRILLS

!!

NEW

ETL Electrial and ETL Sanitation Certiﬁcate listed

Made In

Italy

Versatile cooking machines, ideally suited for high volume food service operations. Designed for Cafes, Kiosks, Bars/ Pubs, Concession Stands, Snack Bars, Restaurants, Delicatessens, Super Markets and home use. These devices are suitable for cooking meat, ﬁsh, eggs, vegetables, cheese and any other types of food that can be grilled. Ideal for sandwiches and rolls of different sizes and thicknesses. The ﬁne grain, cast iron cooking surfaces are covered in a high heat resistant NO PEEL, NO CHIP, NON-STICK PANINONSTICK® high heat resistant ceramic coating. This ensures perfect thermal conductivity and heat distribution, resistance to oxidation, easy clean up & maintenance and longer product life. Our Panini Grills are offered in 3 different sizes and come with a variety of different cooking surfaces to choose from to meet your customers needs. Depending on model size, cooking surfaces may be available in ribbed, smooth, mixed ribbed/smooth or for crepes.

• Cooking temperatures up to 570° F with mechanical timer

• Adjustable upper plates

• Self balancing upper plates

• Shock proof and heat treated/coated heating elements

• Adjustable thermostat up to 300° C (dual thermostat on double panini grill)

• Heavy Duty construction

• Removable drip trays

• Comes with heavy duty metal cleaning brush

• Small footprint/design makes it easy to handle, place, clean and suitable for small work areas

• Warranty: 1 Year Parts & Labor

AlfA # electricAl Net Weight ShippiNg Weight DiMeNSioNS

ALFA MINI 120V 20A 33 lbs. 40 lbs. 10-1/4" W x 17-1/8" D x 9-1/4" H ALFA SINGLE 120V 20A 46 lbs. 53 lbs. 15 ALFA DOUBLE 120V 20A 68 lbs. 70 lbs. 20-1/4

" W x 17-1/8" D x 9-1/4" H

914.273.2222 / 800.327.ALFA (2532) www.alfaco.com Fax 914.273.3666 / 800.328.ALFA (2532)

9

HARD CHEESE GRATERS

Made In

Italy

• Body Stainless Steel Construction

• Grating Head Heavy Stainless Steel Construction

• Grating Drum (1/6" teeth) Stainless Steel Construction

• Output 120 to 150 pounds per hour

• Collectin Bowl Extra Large & Lite Weight Food Safe Plastic

• Drum RPMs 1000

• Motor 380W / Poly V Belt Driven & Fan Cooled

• Safety Interlock Switch

• Unique Hopper Output Design “ensures” Operator Safety

• Hopper Opening 5 1/2" x 3 1/8"

• Electrical 120V AC - 60Hz / 3.2 Amp.

• Shipping Dimensions 19-3/4" x 11 3/4" x 21 5/8"

• Suitable for small to large commercial foodservice operations

• Warranty 1 year parts & labor

Electrical & Sanitation Certifications listed and conforms to UL Std. 763 and NSF Std. 008

The fan cooled motor ensures extended product life and optimal production & performance. This 1/2 HP belt driven unit produces power equivalent to similar 1 – 1.5 HP gear driven equipment. Uniquely the “ONLY” commercial Hard Cheese Grater on the market to have ETL foodservice approvals that conforms to UL & NSF standards.

Prevents Operation when Hopper is open

AlfA # DeScriptioN electricAl Net / Ship Weight DiMeNSioNS

ALFA OCG 1/2 HP Hard Cheese Grater 380W/120V AC - 60Hz - 3.2A 33 / 40 lbs. 21 5/8" x 11 3/4" x 19 3/4"

Available in 1 HP and 1.5 HP Sizes

Made In

Italy

10-1/2" To Top of Handle

The FAMA Hard Cheese and Bread Grater is a rugged commercial unit with the following features:

• Feeder Handle Interlock Prevents Grater from

Interlock Switch for Safety

• Hopper Hand Guard Grill For operator safety and

operating unless the handle is down

injury prevention

• Direct Gear Driven Motor Longer wear with no

Built-in Safety Hand Guard

Stainless Steel Bowl

• Stainless Steel Bowl and Grater Drum For sanitary

• Hopper Opening 3.25˝ x 5.5˝

• Heavy Anodized Aluminum Construction

• Chrome Finish

• Warranty 6 months

belts or chains to replace

operation and easy cleaning

ELECTRICAL REQUIREMENTS: 110 Volts, 60 Cycle, 1 Phase

AlfA # DeScriptioN Weight Box DiMeNSioNS output

FAMA-1 1 HP Cheese Grater 40 Lbs. 16 FAMA-1.5 1.5 HP Cheese Grater 50 Lbs. 16

" x 12" x 16-1/2" 130 - 150 lbs. / Hr. " x 12" x 16-1/2" 150 - 170 lbs. / Hr.

Note: For grating hard cheeses only (such as Romano and Parmesan).

(Service Note: Our Grater/Shredder Attachments on page 28 are ideally designed to shred a variety of soft

cheeses. Refer to Cross Reference Guide on page 30 for appropriate Shredding Disc sizes & applications)

10

914.273.2222 / 800.327.ALFA (2532) www.alfaco.com Fax 914.273.3666 / 800.328.ALFA (2532)

CHEESE CUTTERS

Cheese Easy

The Cheese Easy Cutter is made of heavy duty Stainless Steel designed for cheese shops, supermarkets, delis and pizzerias. Non slip rubber feet provide stability. The replacement Stainless Steel cutting wire will handle most sizes and shapes of cheese.

• Rugged Heavy duty Stainless Steel for professional use.

• Safe No sharp blade to worry about. Uses a thin Stainless Steel wire to cut.

• Sanitary Easy-to-clean Stainless Steel finish allows hot water immersion or steam cleaning.

Re p l a c e m e n t Wi R e s

Al f A # Mo d e l di M e n s i o n s We i g h t

CE2 Standard 14" L x 10" W 7 lbs.

Al f A # Re p l A c e M e n t fo R di M e n s i o n s

CE1W CE1 33" Long CE2W CE2 24" Long

• Warranty: 6 Months

cc-20

• Two-way cutting means cutting arm can be locked in

position for push-through slicing or rotated to cut down into cheese.

• Cutting wire can easily be replaced without tools

• Rubber feet hold cutter firmly in place on table or counter.

cc-12

• Compact size fits just about anywhere.

• Just the right size for cutting small blocks and brick cheeses

Easy way to cut all types of cheese. Use cutter to slice through cheese, or push cheese through cutting wire. Use it to cut any shape of cheese wheels or blocks. Makes slices or wedges easily. Stainless Steel and polyethylene construction makes cleaning simple.

Al f A # di M e n s i o n s We i g h t

CC-20 20" x 20" 16 lbs. CC-12 12" x 12" 8 lbs.

Al f A # Re p l A c e M e n t fo R le n g t h

CC-20R CC-20 14-3/4" CC-12R CC-12 14-3/4"

Re p l a c e m e n t Wi R e s

• Warranty: 6 Months

HAND CHEESE CUTTER

Al f A # de s c R i p t i o n W i R e si z e We i g h t

HC4 Cheese Cutter with 36" 3.0 oz. grey handle and 2 wires HC3 Pkg. of 12 Replacement Wires 24" 1.1 oz. HC5 Pkg. of 12 Replacement Wires 36" 1.3 oz.

914.273.2222 / 800.327.ALFA (2532) www.alfaco.com Fax 914.273.3666 / 800.328.ALFA (2532)

HC4

Made In England

Stainless Steel wire and grey plastic handle. For cutting whole cheeses.

11

Note:

KITCHENAID PROFESSIONAL MIXERS

These Mixers are heavy duty “Professional Series” models.

KitchenAid Commercial Mixers utilize a unique planetary mixing action to reduce mixing time. Each machine is equipped with 10 different mixing speeds. The “Soft Start” feature helps prevent ingredient splash out/up. Direct-drive, all steel gear transmissions ensure product resiliency and longevity. Our heavy duty, durable die-cast metal construction mixers also include an “Electronic Speed Sensor”, which is designed to maintain uniform mixing speeds regardless of product load. A professional “bowllift design” includes sturdy metal arms for mixing stability. 5 strategically located rubber feet eliminate mixer wobble or “walk” during use. The “Control Lever Safety Guard” helps to prevent unintentional mixer activation and ensures safe operation at all times. Each mixer comes equipped with a Stainless Steel Bowl, Whip, Beater Paddle, Spiral Dough Hook and 50" long power cord. These small counter top mixers are conveniently portable, yet incredibly powerful & diverse food processing tools. Their compact size make them space efficient, as well as economical solutions for small to large commercial foodservice operations, both in cost & performance. We offer a wide array of KitchenAid Accessories to meet all of your food processing applications.

Warranty: 1 year

ALFA # DESCRIPTION ELECTRICAL NET/SHIP WEIGHT DIMENSIONS

KM25GOX KitchenAid 5 Qt. Commercial Mixer - NSF (.6 HP) 120V-60Hz/450W 26/30 lbs. 16.5 KP600 KitchenAid 6 Qt. Commercial Mixer (.8 HP) 120V-60Hz/575W 27/31 lbs. 16.5

h

k5kgk

k

o

4

B

S

A

fitS MoDelS

BOWLS AND AGITATORS

ALFA # KITCHEN AID # DESCRIPTION

K4B K45B 4 Qt. Flat Beater x x x x x x x

K4DH K45DH 4 Qt. Dough Hook x x x x x x x x x x

K4W K45WW 4 Qt. SS Wire Whip x x x x x x x x x x

K4HBWSS K45SBWH 4.5 Qt. SS Mixing Bowl w/Handle x x x x x x x x x

K5B K5AB 5 Qt. Flat Beater x x x x x x x x

K5BNSF KSMC50B 5 Qt. Flat Beater - NSF x x x

K5DH K5ADH 5 Qt. Dough Hook x x x x x x x

K5DHNSF KN25DHNSF 5 Qt. Spiral Dough Hook - NSF x

K5CDHNSF KSCMC50DHNSF 5 Qt. Dough Hook - NSF x x

K5W* K5AWW 5 Qt. SS Wire Whip x x x x x x

K5WNSF K5AWWC 5 Qt. SS Wire Whip - NSF x x

K5PBWSS K5ASBP 5 Qt. SS Mixing Bowl w/Handle x x x x x

KN25NSF KN25NSF 5 Qt. SS Mixing Bowl w/Handle - NSF x

K6B* KN256BBT 6 Qt. Flat Beater x

K6DH* KN256BDH 6 Qt. Dough Hook x

K6W* KN256WW 6 Qt. SS Wire Whip x

K6PBWSS* KN2B6PEH 6 Qt. SS Mixing Bowl w/Handle x

S r t N 5 0

k

4

p

4

5

S

5

S

0

M

S

5

S

M

5

7

0

5

p

k

S

M

9

1

0

5

0 0

" H x 11.3" W x 14.6"D

" H x 11.3" W x 14.6" D

k

S

M

1

0

1

3

0

k

S

M

1

5

0

1

2

k

S

N

M

1

2

c

5

e

g

0

1

0

x

k p 6 0 0

Note: Part numbers with an asterisk ﬁt a variety of additional KitchenAid Mixer Models not noted above. Call for Model #s.

12

914.273.2222 / 800.327.ALFA (2532) www.alfaco.com Fax 914.273.3666 / 800.328.ALFA (2532)

KITCHENAID PROFESSIONAL MIXER ACCESSORIES

Meat / Food Grinder - KFGA

Grater / Shredder / Slicer - KEPA

Ice Cream Maker - KICMA

Fruit & Vegetable Strainer / Grinder - KFVSG

Citrus Juicer - KCJA

ACCESSORIES These Accessories fit all KitcheAid Stand Mixer Models and Sizes

ALFA # KITCHENAID # DESCRIPTION

KFGA FGA Meat / Food Grinder Attachment KSSA SSA Sausage Stuffing Tubes KFPA FPPA Includes: (1) Shredder/Grater/Slicer, (1) Meat/Food Grinder, (1) Fruit/Veggie Grinder/Strainer KRSA RVSA Shredder/Grater/Slicer Attachment KCJA JE Citrus Juicer Attachment KFVSG FVSFGA Fruit and Vegetable (Strainer/Grinder) Attachment KICMA KICAOWH Ice Cream Maker Attachment KPEA KPEX Pasta Excellence Kit includes (1) Pasta Roller, (1) Ravioli Maker, (1 each) Fettuccini, Spaghetti, Pappardelle and Angel Hair Pasta Cutter KPRA KPRA Includes: (1) Pasta Roller, (1) Fettuccini Cutter, (1) Spaghetti Cutter

Pasta Excellence Kit - KPEA

Note: We can special order any KitchenAid Accessories that we do not stock in house.

914.273.2222 / 800.327.ALFA (2532) www.alfaco.com Fax 914.273.3666 / 800.328.ALFA (2532)

13

NEW

!!

Made In

France

ELECTRIC JUICERS

This is arguably the premiere electric commercial juicer on the market today, for all fruits & vegetables. Utilizing “Centrifugal” technology, this machine can produce up to 15 gallons per hour of fresh juice, sauces, ice cream, sorbets and many other types of liquids for “any” food service facility. Equally as impressive, this appliance can operate at liquid temperatures from 39°-248° F at 3600 RPMs. It features an extra wide, 3" feeding chute, negating the need to cut up many fruits & vegetables before juicing. 1 Stainless Steel 0.5 mm centrifugal basket is standard with each unit & an optional 0.8 mm basket is available for more ﬁbrous produce. All removable parts are dishwasher safe and the unit’s motor is protected by an “internal thermal detector & overload” device, ensuring optimal performance and extended product life. Our juicer comes equipped with the Extractor “Ezy-Clean® System”. No tools are needed to break this machine down after use, ensuring quick & safe clean-up. Designed with a patented “Auto Locking System”, this feature guarantees electric cut-off & motor braking. Each machine comes with 2 gallon collection basket, permitting uninterrupted use & maximum productivity. Constructed largely of Stainless Steel, this device is certiﬁed with NSF, CE & UL approvals.

Warranty: 1 Year Parts & Labor

electricAl Net Ship DiMeNSioNS AlfA # DeScriptioN Motor cApAcity SpecS Weight Weight StANDiNg/BoxeD

ALFA CJE Professional-Heavy Duty 1.75 HP 15 gal./min. 110/120V 53 lbs. 60 lbs. 23" x 13" x 19" Stainless Steel 60Hz-1 Phase 23-1/4" x 14-1/2" x 26" Centrifugal Juicer 12A-1300W

This “little” juicing giant boasts convenience and strength. It’s compact, powerful, fast and automatic. The ﬁnely crafted one piece Stainless Steel cutter/strainer is powered by a 600W 3/4 HP motor. Rich, fresh juice is instantly produced from the ejector spout, while dry ﬁbrous pulp is released into the external waste hopper. The collection hopper easily lifts off for disposal & cleaning. This juicer makes quick work of carrots, honeydew, pears, watermelon, beets, apples, pineapple, all berries, grapes, seeds, stems, rind and all. The device is a snap to clean, as all juicing parts simply unclamp and lift apart. The components are rust-proof & acid-proof and suitable for dishwasher safe cleaning. Not only efﬁcient & strong, this portable and compact juicer is extremely cost effective and makes a great addition to any home or small foodservice operation. Each unit bares ETL approval.

Warranty:

3 Years for home use, 6 months for light commercial use.

NEW!!

electricAl Net Ship AlfA # DeScriptioN Motor SpecS Weight Weight DiMeNSioNS

ALFA APMJ Mini-Centrifugal Juicer 3/4 HP 110/120V-60Hz/600W 6.4 lbs. 6.7 lbs. 11-1/2" x 7*1/2" x 11-1/2"

914.273.2222 / 800.327.ALFA (2532) www.alfaco.com Fax 914.273.3666 / 800.328.ALFA (2532)

14

NOW IN STOCK

MANUAL CITRUS JUICERS

JUICE UP YOUR PROFITS!

elegANt – light Duty Juicer

Metal alloy with durable polished chrome finish. Classic styling. Powerful rack and pinion gear system produces 600 lbs. of pressure for lemons, limes, oranges & small grapefruits. Easy to clean and use.

ShippiNg AlfA # DeScriptioN DiMeNSioNS Weight pAckAgiNg

JHC Household Juicer 7-1/2" H 6 lbs. 6 Per Case

Juice pro – coMMerciAl reStAurANt Juicer

Designed for restaurants, juice bars and professional style kitchens. Squeezes lemons, limes, oranges & small grapefruit with one pull of the spring-loaded lever (produces up to 2,000 lbs. of pressure to extract every drop of juice). Stainless Steel strainer, cone and funnel. SST juice cup included. Suction cup feet for stability and non-slip rubber handle. All metal construction for durability. Easy to use and clean.

ALFA

EXCLUSIVE

ShippiNg AlfA # DeScriptioN DiMeNSioNS Weight pAckAgiNg

JP Juice Pro Juicer 20-1/2" H 14 lbs. 4 Per Case

• ITS Tested

Juice kiNg – heAVy Duty coMMerciAl Juicer

Made for heavy duty use with a patented lever mechanism. Constructed of high quality chromed zinc alloy die casting. Extra wide Stainless Steel cone and funnel, sure grip handle and sturdy base. Easy to clean and operate. SST juice cup included.

ShippiNg AlfA # DeScriptioN DiMeNSioNS Weight pAckAgiNg

JK Juice King Juicer 17" H 14 lbs. 4 Per Case

• ITS Tested

• Warranty: 6 Months (each model)

914.273.2222 / 800.327.ALFA (2532) www.alfaco.com Fax 914.273.3666 / 800.328.ALFA (2532)

15

COLD / FROZEN BEVERAGE DISPENSERS

Made In

!!

Italy

NEW

ALFA carries a complete line of Cold / Frozen Beverage Dispenser’s, designed to meet your customer’s foodservice needs & applications. We carry dispensers that simply refrigerate & dispense “cold” ﬂuids and a variety of dispensers that perform a wider variety of functions depending on consumer, business & marketing needs. Our unique, exclusive & patented design results in a “multi-purpose usage” Cold or Frozen Beverage Dispenser suitable for a variety of preparations, in a number of different temperatures & (9) different viscosity settings. Choose to serve “Cold” Lemonade/Ice Tea/Coffee or program your machine to serve “Frozen” Margaritas, Daiquiris, Pina Coladas, Mud Slides, Lemonade (with or without alcohol) or Sorbet in approximately 60-90 minutes, with a touch of a button. The diversity of our equipment also allows end-users to serve Milk based products like Yogurt, Shakes & Smoothies. In multiple bowl units, you have the convenience of pouring cold beverages from one bowl, while serving frozen products from a 2nd or 3rd bowl simultaneously. If your customers require machines that can handle higher ambient temperatures based on their geography, we have dispensers which have been manufactured accordingly to optimally perform in every climate. Select from a number of different bowl capacities, ranging from as little as 1.6 gallons for our smallest machine (ABB1), up to as much as 9.6 gallons across a number of different models & styles. Why buy a “cold” drink dispenser that can only chill your beverages when you can invest in a scalable & diverse “Cold / Frozen” Beverage Dispenser that can produce a broader range of products effortlessly, efﬁciently, expeditiously & economically.

Warranty: 5 years Condenser, 3 years Electronics, 2 years Parts, 90 days Labor with a National Service Plan/Network

Note: We do not carry a line of beverage mixes/syrups for our beverage dispensing equipment. Please speak to one

of our professional Customer Service Representatives and we will be happy to refer you to a number of preapproved vendors that we can recommend to you and your customers.

ALFA # Description Motor Electrical Net/Ship Dimensions (H x W x D)

AFCM-3 Programmable-(3) Bowl (9.6 Gallon) Cold / Frozen Beverage Dispenser 1200W/1.6 HP 115V-60Hz 141/154 lbs. 30.7" x 24.4" x 22"

AFCM-2 Programmable-(2) Bowl (6.4 Gallon) Cold / Frozen Beverage Dispenser 900W/1.2 HP 115V-60Hz 115/130 lbs. 30.7" x 16.9" x 22"

AFC-3 (3) Bowl (9.6 Gallon) Cold / Frozen Beverage Dispenser 1350W/1.8 HP 115V-60Hz 140/154 lbs. 30.8" x 24.4" x 22"

AFC-2 (2) Bowl (6.4 Gallon) Cold / Frozen Beverage Dispenser 900W/1.2 HP 115V-60Hz 115/130 lbs. 30.8" x 16.2" x 22"

AFC-1 (1) Bowl (3.2 Gallon) Cold / Frozen Beverage Dispenser 500W/.67 HP 115V-60Hz 68/77 lbs. 30.8" x 9 .4" x 22"

AFCT-3 (3) Bowl (9.6 Gallon) Cold / Frozen Bev. Dispenser - Tropical Climates 900W/1.2 HP 115V-60Hz 141/130 lbs. 30.7" x 26.9" x 22"

AFCT-2 (2) Bowl (6.4 Gallon) Cold / Frozen Bev. Dispenser - Tropical Climates 1200W/1.6 HP 115V-60Hz 115/130 lbs. 30.7" x 24.4" x 22"

ABB-2 (2) Bowl (3.2 Gallon) Cold / Frozen Beverage Dispenser 540W/.72 HP 115V-60Hz 75/84 lbs. 21.9" x 17.3" x 18.7"

ABB-1 (1) Bowl (1.6 Gallon) Cold / Frozen Beverage Dispenser 320W/.43 HP 115V-60Hz 55/59 lbs. 21.9v x 9.8" x 18.7"

ACD-3 (3) Bowl (9.6 Gallon) Cold Drink Dispenser 410W/.56 HP 110V-60Hz 66/87 lbs. 22.2" x 19.7" x 14.4"

ACD-2 (2) Bowl (6.4 Gallon) Cold Drink Dispenser 225W/.31 HP 110V-60Hz 47/60 lbs. 22.2" x 13.1" x 14.4"

Note: Parts lists are available and included in each owners manual that accompanies your purchase. Additional copies can be obtained by calling one of our professional Customer Service Representatives. Please be to sure to consult your owner’s manual and follow all instructions associated with initial equipment set-up and activation.

914.273.2222 / 800.327.ALFA (2532) www.alfaco.com Fax 914.273.3666 / 800.328.ALFA (2532)

16

!!

COLD / FROZEN BEVERAGE DISPENSERS

Made In

NEW

AFC-1

AFC-2

Italy

AFC-3

ABB-2

ABB-1

Product Features:

• Our Multi-purpose “Cold/Frozen” Beverage Dispensers are perfect for Slushies, Sorbet, Smoothies, Sangria, Iced

Coffee/Tea, Lemonade, Italian Granitas, Frozen Margaritas, Coladas, Daiquiris, Yogurts, Shakes & much more.

• Our patented design all but eliminates “preventative maintenance” versus competitive products where

preventative maintenance is costly & mandatory annually.

• The drive shaft of each unit is manufactured with patented “Seal-less” operation, which makes it uniquely the most

“hygienic & safest” product of it’s kind on the market.

• Our equipment does NOT require periodic lubrication or seal replacements.

• The “simplest & easiest” machines to clean & maintain on the market.

• User-friendly, easy-to-read and programmable (AFCM3/AFCM2 models exclusively) electronic controls make

operation a snap.

• Manufactured to comply with HACCP Standards.

• Innovative Design makes each unit a powerful merchandiser & proﬁt center for any business.

• A “Manual & Electronic” Locking System make our products a perfect ﬁt for self-service locations.

• A powerful & energy efﬁcient Refrigeration System makes our preparation process the fastest on the market.

• One of kind “Double Blade” (auger) Mixing System & On-Board “Viscosity Control” Monitoring System.

914.273.2222 / 800.327.ALFA (2532) www.alfaco.com Fax 914.273.3666 / 800.328.ALFA (2532)

17

COMMERCIAL SCALES

portABle portioN coNtrol ScAle

ASW

AlfA # Weight cApAcitieS poWer Source optioNS Net/Ship Weight DiMeNSioNS-plAtter

ASW-5 5 lbs./0.002 lbs. (6) D Batteries / AC Adapter incl. RD/LP 6.9/10 lbs. 10.2" x 11.3" x 5.4"/9.1" x 7.5" ASW-10 10 lbs./0.005 lbs. (6) D Batteries / AC Adapter incl. RD/LP 6.9/10 lbs. 10.2" x 11.3" x 5.4"/9.1" x 7.5" ASW-20 20 lbs./0.01 lbs. (6) D Batteries / AC Adapter incl. RD/LP 6.9/10 lbs. 10.2" x 11.3" x 5.4"/9.1" x 7.5" ASW-50 50 lbs./0.02 lbs. (6) D Batteries / AC Adapter incl. RD/LP 6.9/10 lbs. 10.2" x 11.3" x 5.4"/9.1" x 7.5"

This dynamic “little” Portion Control Scale is not only portable, but packed with a variety of functions & options. Best of all, our Portion Control Scale is “LEGAL for TRADE”. (4) Weighing Capacities from 5-50 lbs. (4) Weight Modes (Kg/lb/oz/g), Battery or AC powered, LCD Display, Full Protective “Wet Cover“ & Stainless Steel Platter makes this more then just a Portion Control Scale. Ideal for Farmers Markets, Kiosks, Candy Stores & more. oversized “Large Platter” (LP) when ordering.

NEW

Warranty: 1 year parts & labor.

!!

Options: “Rear Display” (RD) or add an

price coMputiNg ScAle

AS2k

AlfA # Weight cApAcitieS poWer Source optioNS Net/Ship Weight DiMeNSioNS-plAtter

AS2K-30 30 lbs./0.01 lbs. AC120V/60Hz KG/WC/FP 17.1/20 lbs. 15.3" x 14.3" x 6.4"/14.6" x 10.9" AS2K-60 60 lbs.-0-30 lbs. x 0.01 lbs.| 30-60 lbs. x 0.02 lbs. AC120V/60Hz KG/WC/FP 17.1/20 lbs. 15.3" x 14.3" x 6.4"/14.6" x 10.9"

This “Programmable” Price Computing Scale features a low proﬁle along with “LEGAL for TRADE” certiﬁcation. Each unit features a “raised tactile soft touch keyboard” for easy programming of 999 (PLUs). A VFD Display ensures easy viewing. (2) Weighing Capacities from 0-30 & 0-60 lbs. AC powered with a Stainless Steel Platter. Designed with Auto Span Adjustment & Auto Zero Tracking technology. Platter” (FP) when ordering.

Warranty: 2 years parts & labor.

Options: Kg Version (KG) and/or add a “Wet Cover” (WC) and/or “Fish

price coMputiNg AND priNtiNg ScAle

Versatile & “Programmable Price Computing Scale” that is “LEGAL for TRADE”. (3) Dual Range Weighing Capacities

A2Jr

AlfA # Weight cApAcitieS poWer Source optioNS Net/Ship Weight DiMeNSioNS-plAtter

A2JR-15 15 lbs.-0-6 lbs. x 0.002 lbs.| 6-15 lbs. x 0.006 lbs. AC120V/60Hz-Battery P/WC/FP/DLP50 9.9/16 lbs. 12.9" x 13.6" x 4.2"/12" x 8.7" A2JR-30 30 lbs.-0-15 lbs. x 0.002 lbs.| 6-15 lbs. x 0.006 lbs. AC120V/60Hz-Battery P/WC/FP/DLP50 9.9/16 lbs. 12.9" x 13.6" x 4.2"/12" x 8.7" A2JR-60 60 lbs.-0-30 lbs. x 0.002 lbs.| 30-60 lbs. x 0.006 lbs. AC120V/60Hz-Battery P/WC/FP/DLP50 9.9/16 lbs. 12.9" x 13.6" x 4.2"/12" x 8.7"

Dlp50

(15lbs/30lbs/60lbs). (4) Display options - VFD or LCD Display (V or L) or add a VFD or LCD POLE Display. LCD models may be powered by a manufacturer included rechargeable battery. The “raised tactile soft touch” keyboard makes programming 199 Indirect (PLUs) & 3 Direct (PLUs) a breeze. Kg/lb Switchable, Stainless Steel Platter & Auto power off.

Options: Pole Display (P), “Printer” (DLP50), A2JR-LABELS, “Wet Cover’ (WC) and/or “Fish Platter” (FP) when ordering. Warranty: 2 years parts & labor.

price coMputiNg & lABel priNtiNg ScAle

Alp1-30

AlfA # Weight cApAcitieS poWer Source optioNS Net/Ship Weight DiMeNSioNS-plAtter

ALP1-30 30 lbs./0.01 lbs. AC110/120-240V-50/60Hz WC/FP 22.5/46 lbs. 16.1" x 16.9" x 7.8"/15.7" x 9.6" ALP1-30P 30 lbs./0.01 lbs. AC110/120-240V-50/60Hz WC/FP 24.5/46 lbs. 16.1" x 16.9" x 7.8"/15.7" x 9.6"

“LEGAL for TRADE” High-Speed Thermal Label Printing Scale ideal for small/medium store applications. SPECS: 4K PLUs/54 Preset Keys, 30 Standard Label Formats, Auto Printing & Save Keys for easy PrePacking. Comes with Vacuum Fluorescent Displays (VFD) and Stainless Steel Platter. VFD Pole Display model is avalable (ALP1-30P). Desig Span Adjustment & Name (56 Characters/PLU). Warranty: 1 year parts & labor.

Auto Zero Tracking technology. Fea

Options:

“Wet Cover” (WC) and/or “Fish Platter” (FP) when ordering.

tures: 1K Ingredient Messages (50 Characters x 8/line), Commodity

ned with Auto

poS iNterfAce AND BeNch/plAtforM ScAle

ApD2

AlfA # Weight cApAcitieS poWer Source optioNS Net/Ship Weight DiMeNSioNS-plAtter

APD2-15 15 lbs.-0-6 lbs. x 0.002 lbs.| 6-15 lbs. x 0.005 lbs. AC120V/60Hz RPD/BP/IC 14.8/20 lbs. / 19/25 lbs. w/Pole 15" x 11" x 4"/15" x 11" APD2-30 30 lbs.-0-15 lbs. x 0.005 lbs.| 15-30 lbs. x 0.01 lbs. AC120V/60Hz RPD/BP/IC 14.8/20 lbs. / 19/25 lbs. w/Pole 15" x 11" x 4"/15" x 11" APD2-60 60 lbs.-0-30 lbs. x 0.01 lbs.| 30-60 lbs. x 0.02 lbs. AC120V/60Hz RPD/BP/IC 14.8/20 lbs. / 19/25 lbs. w/Pole 15" x 11" x 4"/15" x 11" APD2-150 150 lbs.-0-60 lbs. x 0.02 lbs.| 60-150 lbs. x 0.05 lbs. AC120V/60Hz RPD/BP/IC 14.8/20 lbs. / 19/25 lbs. w/Pole 15" x 11" x 4"/15" x 11"

ECR Interface Scale allows users to interface with many ESR & POS systems, speciﬁcally UPS world-ship software. Easily used as a Bench Scale based on low proﬁle construction. 2nd side display, (4) Dual Range Weight Capacities available from 15, 30, 60 & 150 lbs, Stainless Steel Patter. “Remote Pole Display” (RPD), Stainless Steel “Ball Platter” (BP) and “Interface Cables” (IC) are available when ordering.

“LEGAL for TRADE” certiﬁed.

Warranty: 2 years parts & labor

Features: Easy to read Tilt VFD Display, along with

Options:

914.273.2222 / 800.327.ALFA (2532) www.alfaco.com Fax 914.273.3666 / 800.328.ALFA (2532)

18

COMMERCIAL / INDUSTRIAL SCALES

ADl

AlfA # Weight cApAcitieS poWer Source Net/Ship Weight DiMeNSioNS-plAtter

ADL-150 150 lbs. -150 x 0.05 lbs. | 60 kg. x 20 g. AC 1.5V or 6 C Batteries 39.7/46 lbs. 16.5" x 25.8" x 31"/15.8" x 20.6" ADL-300 300 lbs. -300 x 0.01 lbs. | 150 kg. x 50 g. AC 1.5V or 6 C Batteries 39.7/46 lbs. 16.5" x 25.8" x 31"/15.8" x 20.6"

BeNch / plAtforM ScAle

Sturdy & well built “LEGAL For TRADE” Bench/Platform Scale for multiple applications. Features: Battery & AC powered, Kg/Lb Switchable, Auto Power-Off, (2) Weight Capacities (150/300 lbs), Easy to Read LCD Display with Auto-Zero Tracking & Auto-Span Adjustment technology.

NEW!!

Warranty: 2 years parts & labor

BeNch / plAtforM ScAle

ABW

AlfA # Weight cApAcitieS poWer Source optioNS

ABW-60 60 lbs.-0-30 lbs. x 0.01 lbs.| 30-60 lbs. x 0.02 lbs. DC12V or 6 C Batteries RP/WK/WC 38.4/46 lbs. 16.7" x 26.2" x 29.7"/15.7" x 20.7"

ABW-150

150 lbs.-0-150 lbs. x 0.05 lbs.| 150-300 lbs. x 0.01 lbs.

Environmentally Sealed to meet IP65 Standards “LEGAL For TRADE” Bench/Platform Scale. Feature: Battery & AC powered, Low Battery Indicator, (2) Weight Capacities (60/150 lbs), (Tilt 90°/Swivel 360°) LCD Display, Counting Feature, Auto-Zero Tracking & Auto-Span Adjustment technology. ordering.

Warranty: 2 years parts & labor

Options: “Receipt Printer” (RP) DEP-50, “Wall Mount Kit” (WK) & “Wet Cover” (WC) when

Net/Ship Weight

DC12V or 6 C Batteries RP/WK/WC 38.4/46 lbs. 16.7" x 26.2" x 29.7"/15.7" x 20.7"

DiMeNSioNS-plAtter

floor ScAle

Heavy Duty & Rugged “LEGAL for TRADE” Floor Scale with (2) Weight Capacities (5Klbs / 10Klbs). Features: Adjustable

AhfS

feet, Quality Powder Coating, Anti-Skid Diamond Plate deck, double shielded Load Cell Cable, 16' Cable. Warranty: 2 years parts & labor

AlfA # Weight cApAcitieS poWer Source optioNS

AHFS-405 5,000 lbs. x 1 lbs. AC110/220 and Rechargeable Battery AR1/AR2 240/290 lbs. 48" x 48" x 3.5"

AHFS-410 10,000 lbs. x 2 lbs. AC110/220 and Rechargeable Battery AR1/AR2 280/330 lbs. 48" x 48" x 3.5"

Net/Ship Weight

DiMeNSioNS-plAtter

WeighiNg iNDicAtorS

We offer (5) Weighing Indicators for the “AHFS Floor Scale”. The ACI-24BS is a premium Indicator. Features: “Washdown”

Aci-24BS

Aci-21BS

AlfA # poWer Source optioNS

ACI-24BS (LCD) AC 110/220 and Rechargeable Battery RP 3.1/7 lbs. 9.5" x 2.8" x 6.5" ACI-21AS (LED) or AC1-21BS (LCD) AC 110/220 and Rechargeable Battery RP 1.1/6 lbs. ACI-21A (LED) or AC1-21B (LCD) AC 110/220 RP 1.1/4 lbs. 9" x 2.3" x 4.7"

AcpS-2

Stainless Steel Case - Environmentally Sealed to IP65 Standards, Bright LCD Display, Battery Operated & Kg/lb Switchable.

The ACI-21AS (LED) or ACI-21BS (LCD) have Stainless Steel cases & are Kg/lb Switchable. ACI-21A (LED) & ACI-21B (LCD) have plastic cases and are our value line of indicators.

Options: “Receipt Printer” (RP) DEP-50 for all (5) models when ordering. Warranty: 2 years parts & labor.

Net/Ship Weight

Aci-21B

DiMeNSioNS

9.5" x 2.8" x 6.5"

pAllet JAck ScAle

Industrial “LEGAL for TRADE” Pallet Scale & Jack, all in one. Features: Built-in Printer. Weight Capacity 5,000 lbs., LCD backlight Display, Kg/lb Switchable. Powered by rechargeable 6 volt battery, AC Adapter included. Warranty: 2 years parts & labor

AlfA # Weight cApAcitieS poWer Source optioNS

ACPS-2

5,000 lbs. x 2 lbs. AC 110/220 and Rechargeable Battery PP 350/410 lbs. 27.8" x 47.2" x 45.5

914.273.2222 / 800.327.ALFA (2532) www.alfaco.com Fax 914.273.3666 / 800.328.ALFA (2532)

Net/Ship Weight

DiMeNSioNS

19

ALFA

FOOD WARMERS

EXCLUSIVE

These quality Food Warmers are made of heavy duty Stainless Steel. They are mirror polished with ventless bodies which not only make them easy to clean, but also makes them look great for front-of-the-house duty. Each unit comes with a thermostatically controlled heating element, which ensures longer product life, faster warm-up cycles, maximum energy efficiency and cooler to the touch temperatures for safety & handling. Cooler to the touch and a smaller footprint.

fW9000

• Mirror-polished 18/8 Stainless Steel

• EZ-DRAIN front spigot makes draining water easy and safe

• Thermostatically controlled element heats only when

Cooler to Touch

• Water resistant On/Off Switch Cover

• Standard 12" x 20" well accepts most popular pans

needed – saving energy

• 65" Cord with 3 prong grounded plug

fW8000

• Includes all the features of the FW9000 above

excluding the EZ-DRAIN front spigot

Mirror Finish

Energy Saving Thermostat

fW9002

Includes all the features of the FW9000 above plus

• One full size Stainless Steel cover

Double

• 2 Stainless Steel inserts (8 quart capacity)

• 2 Stainless Steel ladles

• 2 Stainless Steel lids

• 2 sets of product cards with holders

fW9003

Includes all the features of the FW9000 above plus

• One full size Stainless Steel cover

Triple

• 3 Stainless Steel inserts (5 quart capacity)

• 3 Stainless Steel ladles

• 3 Stainless Steel lids

• 3 sets of product cards with holders

Tech Tip:

Add a few marbles to the water in the well. They will start to pop when more water is needed.

Operation Note: These Food Warmers are for “Wet Use” only. Dry operation of this equipment is dangerous

and will VOID all product warranties. Warranty: 6 Months

Voltage: 120V AC, 60HZ, 1PH

•

• Power: 1200 Watts

• Amperage: 10 Amps

ShippiNg AlfA # DeScriptioN Weight

FW8000 Standard Warmer without Spigot 23 lbs. FW9000 Single Warmer with Spigot 24 lbs. FW9002 Double Warmer with Spigot 33 lbs. FW9003 Triple Warmer with Spigot 34 lbs.

Specifications:

• Well Capacity: 3.5 Quarts of hot water

• Outside Dimensions: 24" Long, 13-1/4" Wide, 10" High

• Inside Dimensions: 20" Long, 12" Wide, 6" High

914.273.2222 / 800.327.ALFA (2532) www.alfaco.com Fax 914.273.3666 / 800.328.ALFA (2532)

20

SOUP WARMER / COOKER

Our Soup Warmer/Cooker is ideally suited for everything from soup, chili, stew and a variety of sauces. Equipped with a host of quality features that make it able to withstand everyday use.

• Steel outer shell with easy-to-clean black powder finish

• Stainless Steel 10.5 Qt. insert included with each unit

• Powerful 600 Watt heating element

• Easy to use 12 setting thermostat dial

• Prominent amber on/off indicator light

• Set of product signs and magnetic sign holder included

• 4 Oz. Stainless Steel ladle included

• Also available in 220/230 voltage version

• Warranty: 6 Months

• Electrical Specifications: 110 volts, 60 cycles, single phase, 5.0 amps

Operation Note: These Food Warmers are for “Wet Use” only.

Dry operation of this equipment is dangerous and will VOID all product warranties.

AlfA # DeScriptioN DiMeNSioNS Weight

SW6000 Electric Soup Warmer 14” x 14” x 16” 14 lbs. SW606 SS Warmer Insert 10.5 Qt. 3 lbs.

SW6000

SOUP WARMER

Ideal for soup and sauces at an economical price point.

• Steel outer shell with easy-to-clean black powder finish

• Stainless Steel 9 Qt. insert included with each unit

• Powerful 400 Watt heating element

• Easy to use 6 setting thermostat dial

• Prominent amber indicator light

• Magnetic holder and signs included

• 4 Oz. Stainless Steel ladle included

• Warranty: 6 Months

• Electrical Specifications: 110 volts, 60 cycles, single phase, 5.0 amps

Operation Note: These Food Warmers are for “Wet Use” only.

Dry operation of this equipment is dangerous and will VOID all product warranties.

AlfA # DeScriptioN DiMeNSioNS Weight

SW400 Electric Soup Warmer 14” x 14” x 16” 11 lbs. SW606 SS Warmer Insert 10.5 Qt. 3 lbs.

NEW

!!

SW400

914.273.2222 / 800.327.ALFA (2532) www.alfaco.com Fax 914.273.3666 / 800.328.ALFA (2532)

21

STAINLESS STEEL COFFEE MAKERS

These quality Stainless Steel Coffee Makers are designed to withstand the daily grind of high use operations. Made from 18/8 Stainless Steel, all units come with full instructions, cleaning tools and feature the following:

• Automatic temperature control

ALFA

EXCLUSIVE

• 2-way dripless spigot

• Glass coffee cup level gauge

• Heat resistant top and side handles

• Red on/off switch and green ready light

• Heavy duty Stainless Steel construction

• Also available in 220/230 voltage version

• Warranty: 6 Months

• Electrical Specifications: 110 volts, 60

cycles, single phase, CM-35 - 9.3 amps, CM-75 - 12.5 amps, CM-110 - 13.5 amps

cM-110 cM-75

Al f A # De s c r i p t i o n cu p cA p A c i t y He i g H t We i g H t MA x Br e W i n g ti M e

CM-35 35 Cup Stainless Steel Coffee Maker 18-35 18" 8 lbs. 27 Min. CM-75 75 Cup Stainless Steel Coffee Maker 38-75 20" 12 lbs. 38 Min. CM-110 110 Cup Stainless Steel Coffee Maker 55-110 23" 15 lbs. 50 Min.

cM-35

COFFEE MAKERS - STAINLESS STEEL

These Coffee Makers represent exceptional value and come with full instructions and the following features:

• Stainless Steel construction

• Cool-touch side handles

neW!!

• Glass cup level gauge

• Red on/off switch and orange ready light

• Removable drip tray

• Conforms to NSF-8 specifications

• Warranty: 6 Months

• Electrical Specifications: 120 volts,

60 Hz, CM-40 - 1200W, CM-60 - 1200W, CM-100 - 1550W

cMc-100 cMc-60

Al f A # De s c r i p t i o n cu p cA p A c i t y He i g H t We i g H t MA x Br e W i n g ti M e

CMC-40 40 Cup Stainless Steel Coffee Maker 40 19" 8.5 lbs. 30 Min. CMC-60 60 Cup Stainless Steel Coffee Maker 60 21.5" 10.5 lbs. 50 Min. CMC-100 100 Cup Stainless Steel Coffee Maker 100 23" 14 lbs. 90 Min.

cMc-40

ALFA

EXCLUSIVE

914.273.2222 / 800.327.ALFA (2532) www.alfaco.com Fax 914.273.3666 / 800.328.ALFA (2532)

22

!!

DELUXE RICE COOKER

NEW

• Stainless Steel Construction

• 13.8 liters / 60 cup capacity

• Cook and Hold function

• Fully insulated deluxe unit

• Clamp down lid with evaporation tray and drainer

• Electronic temperature control, with a lid element for

balanced heat distribution

• 45 minute cooking time when fully loaded

(varies by rice type)

• Cooks at approximately 217°F and holds between

140°F to 167°F

• Warranty: 6 Months

• Electrical Specifications: 110 volts, 1950 watts, 10 amps

AlfA # DeScriptioN DiMeNSioNS Weight

RC-195 Stainless Steel Rice Cooker 18” x 18” x 13.5” 24 lbs.

TABLE TOP HOT PLATES

Features

• Completely portable and easy to store when not in use

• Adjustable thermostat - 100° F to 450° F

• Constructed of heavy cast aluminum and 304 Stainless Steel

• Teflon cover keeps film from sticking to work surface and is easily replaced

• Can be used for a wide variety of applications including heat shrinking of small

packages

• Sturdy rubber feet keep unit stabilized on any work surface

• Made in the USA

• Warranty: 3 Months

• Electrical Specifications: 115 volts

tt-69

tt-912

NEW!!

AlfA # DeScriptioN Size Weight corD

TT-69 Hot Plate 6" x 9" 5 lbs. 6-1/2 Ft. TT-912 Hot Plate 9" x 12" 9 lbs. 5 Ft. HS5905 Teflon Cover 9" x 12" 1 lb. –

914.273.2222 / 800.327.ALFA (2532) www.alfaco.com Fax 914.273.3666 / 800.328.ALFA (2532)

23

ELECTRIC KNIFE SHARPENERS

US

Easy

Fast

Safe

Effective

oDel ke-168 portABle kNife ShArpeNer - greAt for:

MoDel ke-280 profeSSioNAl kNife ShArpeNer - greAt for:

• Commercial kitchens

(restaurants)

• Food processing

• Culinary schools

“reVolutioNiziNg the WAy to ShArpeN kNiVeS”

Applying the latest technology with foresight and determination we have created a soft sharpening wheel that is unlike the conventional stone-wheeled units that overheat (change temper of the blade), grind away the blade (reduces blade life) and leave many burrs (impossible to be razor sharp). Our innovative sharpener will enable you to produce a Razor Sharp Edge in just a few passes. Award Winning Design. Sharpening wheels are coated with longlasting aluminum carbide material.

The key to our quality edge is a “Soft Touch” flexible sharpening surface, made possible by contact with the knife blade edge more that 99% of the time. It is the best in the world and will produce and maintain the desired 15° bevel every time you sharpen.

• Slaughterhouses

• Supermarkets

• Butchers

• Comes with fine belts

Nirey Double Soft Grinding Wheels

(1) “Nirey Electric Knife Sharpener

System” is a breakthrough in comparison to the hard grinding wheels of conventional knife sharpeners. It features 2 foam carrier wheels at proper angles and is free from the disadvantages of conventional sharpeners.

M

• Camping, hunting, fishing

• Commercial fishing boats

• Outdoor cooking

• Vegetable farms

• Catering & RV

• Comes with AC power adapter

• Comes with fine belts

• DC Cigarette Adapter (optional)

(2) Our “2 foam wheels at proper an-

gles” give a perfect edge matching the existing knife angle with the blade. They absorb the resisting forces and sharpening can be done in as little as 10 seconds.”

KE-280 Specifications:

• Voltage/Power: 100V-120V AC / 180 Watt

• Safety Standard/Certification: cUL, UL, CE

• Sharpening Angle: 15°

• Blade Angle/Blade Thickness: 30°~6°/up to 1/2" tang

• Wheel Speed/Torque: 2,500 RPM / 3,000 GCM

• Max Blade Contacts: Pre-sharpening up to 3/5" high

• Unit Net Weight: 5.4 lbs.

• Unit Per Case: 6 units

• Dimensions: 13" W x 4.9" H x 4.5" D

AlfA # DeScriptioN

KE-280 Commercial Knife Sharpener - AC Power KE-168 Commercial Knife Sharpener - DC Power KE-168 ADAPTER Adapter for KE-168 SC-02A Coarse Belt for KE-280, KE-168, Dexter KE-3000, Mastergrade KE-280 SC-02B Medium Belt for KE-280, KE-168, Dexter KE-3000, Mastergrade KE-280 SC-02C Fine Belt for KE-280, KE-168, Dexter KE-3000, Mastergrade KE-280 GR-2185A Replacement wheel with Coarse Belt for KE-280, KE-168, Dexter KE-3000, Mastergrade KE-280 GR-2185B Replacement wheel with Medium Belt for KE-280, KE-168, Dexter KE-3000, Mastergrade KE-280 GR-2185C Replacement wheel with Fine Belt for KE-280, KE-168, Dexter KE-3000, Mastergrade KE-280

Patents: Germany Patent No. G 92 15 273.2: USA Patent No. 5,397,262: Taiwan Patent No. 80046 75645 78565: China Patent No. ZL 93 2 25297.4

• Voltage/Power: DC 12V 3A - 5A

• Safety Standard/Certification: cUL, UL, CE

• Sharpening Angle: 15°

• Blade Angle/Blade Thickness: 20°~6°/up to 1/2" tang

• Wheel Speed/Torque: 2,500 RPM / 1,200 GCM

• Max Blade Contacts: Up to 3/5" or 1.5cm high

• Unit Net Weight: 3.9 lbs.

• Unit Per Case: 5 units

• Dimensions: 12.2" W x 4.3" H x 4.3" D

Warranty: 6 Months

KE-168 Specifications:

914.273.2222 / 800.327.ALFA (2532) www.alfaco.com Fax 914.273.3666 / 800.328.ALFA (2532)

24

KNIFE SHARPENERS

2

1

MoDel ke-198 Multi-StAge electric houSeholD kNife ShArpeNer

• Compact size, 8.6" x 2.8" x 3.5"

• Pre-sharpening stone restores bevel and extends

cutlery life up to 10 times

• Light duty built-in knife guides

• German Pat 20112057.7, USA Pat 6,932,683

• Warranty: 6 Months

KE-198 Specifications:

• Voltage: 110V AC

• Safety Standard: CE, UL , CSA

• Wheel Speed: 1,1000 RPM

• Torque: 900 G.C.M.

• Maximum Blade Angle: 15°

• Minimum Blade Angle: 11°

• Maximum Grinding Contacts: .1˝

• Dimensions (mm): 220 L x 70 H x 90 W

• Packing / Weight: 3 lbs.

MANuAl ShArpeNerS

Dk SerieS - tWo ShArpeNerS iN oNe

MoDel Dk-507-cz - For Knives and Scissors

MoDel Dk-507-St - For Knives and Fish Hooks

• Dial adjustable for thickness of knife

• 9" L x 1-3/4" W x 2-1/2 " H

• Weight, 1-3/4 lbs.

• Warranty: 6 Months

Multi-purpoSe hAND-helD ShArpeNer

MoDel Dk-5712

• Simple, efficient, economical

• 7-1/4" L x 1-3/4" W x 1-1/2" H

• Weight, 1-1/4 lbs.

For sharpening knife blades

914.273.2222 / 800.327.ALFA (2532) www.alfaco.com Fax 914.273.3666 / 800.328.ALFA (2532)

For sharpening scissors

Note: All products come in a 4-color box with operation instructions

25

27

MEAT CHOPPER / GRINDER

Electrical & Sanitation Certications listed

This small, yet powerful & dynamic table top Meat Chopper / Grinder is one of our most popular selling items. It’s compact & portable design makes it perfect for home use, or for a community center, caterer, RV, camping, church commissary or avid outdoorsman. It features a Die-Cast Aluminum Grinding Head, complete with pan, auger, (1) #12 Knife, (3) plates (ﬁne 1/8", medium 3/16" & course 5/16") & (3) food safe plastic stufﬁng tubes. Don’t be fooled by it’s compact design, because it is powered by a 350 Watt, 1/2 Horse Power Motor. Our little work horse has a capacity to process 2-3 pounds of meat per minute. The MC5 is designed with both a “Forward” & “Reverse” Switch to assist you with your food processing applications. Most importantly, it is uniquely manufactured with a built-in “Overload Protection” Switch, which helps to ensure extended product life & operator safety. Easy to clean, maintain & store, simple hand washing is recommended.

Warranty: 6 months

El E c t r i c a l NE t /Sh i p al f a # DE S c r i p t i o N Sp E c S WE i g h t Di m E N S i o N S

MC5 1/2 HP Meat Chopper / Grinder 115V-60HZ / 350W-1/2 HP 15 lbs./16.5 lbs. 16" x 7" x 17"

WHEAT GRASS JUICERS

NEW!!

This 1/4 HP Wheat Grass Juicer is highly efﬁcient and is available with a Stainless Steel Juicer Head as an option. This juicer is also designed to juice other greens, as well as small soft fuits, like grapes, raspberries, blackberries, strawberries, currants, apricots, kiwis, blueberries and tomatoes. Designed for light non commercial use, the machine is easy to operate and clean. The ALFA WGJ has no aluminum parts and has Stainless Steel self feeding screens. The ALFA WGJ SS comes with a Stainless Steel juicing head, ensuring that ﬂuids only come in contact with stainless steel components. The feed chute is 1.5" round on the Stainless Steel juicing head. Both units are ETL approved.

Warranty: 1 year

El E c t r i c a l NE t /Sh i p al f a # DE S c r i p t i o N Sp E c S WE i g h t Di m E N S i o N S

ALFA WGJ Wheat Grass Juicer w/ Plastic Juicer Head 110V-60HZ-2A 200W 6.5 lbs./7 lbs. ALFA WGJ SS Wheat Grass Juicer w/ Stainless Steel Head 110V-60HZ-2A 200W 14 lbs./15 lbs.

18-1/4" x 5-1/4" x 12"

914.273.2222 / 800.327.ALFA (2532)

26

28

www.alfaco.com Fax 914.273.3666 / 800.328.ALFA (2532)

P-1009

P-1008 or P--1008-22

P-1010

P-1011

P-1007

P-1004

P-1005A

P-1005 Latch

VS-99H / VS-22H Housing

Housing

P-1024 Brass

P-1026 Brass

P-1026A

P-1023

P-1022 Plastic

VS/GS Parts Diagram

VS-12ST

Stud

VS-12DH / VS-22DH Disc Holder

P-1031

Disc

P-1012

VS-12K Knife

P-1014

P-1013

VS-99D

Door

P-1036

P-1017

VS-99D Door

P-1018

VS-12KDS / VS-22KDS Knife Disc Assembly

with Hopper Opening

VS-99P

Pusher Plate

P-1035

914.273.2222 / 800.327.ALFA (2532) www.alfaco.com Fax 914.273.3666 / 800.328.ALFA (2532)

27

29

POWER ATTACHMENTS

ALFA

Grater / sHredder attaCHMents For Hobart

AVAILABLE IN

#22 HUB SIZE!

Our attachments are Precision Machined of Heavy-Gauge polished aluminum and used by many Manufacturers as original equipment. The Shafts are hardened in a unique way and machined to close tolerances for Superior Performance. These units come with safety latches, full instructions and strong packing for shipping. All units are easily disassembled for cleaning. We carry Shredding & Grating Discs in a variety of hole sizes to fit any need. These units can be used on mixers, choppers and power drives with a standard Hobart style #12 or #22 hub. NSF approved & listed. Warranty: 6 months

VS-12ST Stud only

VS-12SD/KD

Disc

Note: All hardware components are Stainless Steel. # 12 size Hubs are the most widely used size. Measure your equipments Hub to be sure before ordering.

VS-12DH Disc Holder VS-22DH Disc Holder

#12 and #22 Power Hubs for Mixers, Grinders,

Food Cutters and Power Drives

VS-99P

Pusher Plate

Hardened Shaft

VS-99D

Door/Hopper

Thicker Gauge Aluminum

P-1005

S/S Hardware

VS-99H/VS-22H

Housing

EXCLUSIVE

GS-12 GS 22

Complete

Assembly

Safety Note: Always Use A Pusher With These Units

replAceS

AlfA # hoBArt # DeScriptioN Weight

GS-12 VS9 #12 Grater/Shredder Attachment Complete with 3/16 GS-22 VS9-22 #22 Grater/Shredder Attachment Complete with 3/16 VS-99P 69316 Pusher/Feed Plate with Adjustable Stop 2 lbs. VS-99D 295669 Door/Hopper with Mounting Pins 4 lbs. VS-99H 83486-1 #12 Back Housing with Brass Bushing and Safety Latch 9 lbs. VS-888

NEW!!

VS-9 BUILDUP Set of #12

Door, Housing and Pusher Plate only 17 lbs. VS-22H 24634-1 #22 Back Housing with Brass Bushing and Safety Latch 9 lbs. VS-12DH ML-16225-Z #12 Disc Holder (Can be replaced with VS-12KDS) 5 lbs. VS-22DH ML-16226-Z #22 Disc Holder (Can be replaced with VS-22KDS) 5 lbs. VS-12ST N/A Disc Holder Stud, Non-Threaded &

may not fit Hobart Disc Holder) P-1005 N/A Door Latch for VS-99H/VS-22H (With adjusting Set Screw) 1 lb. VS-12SD-(Size) 77045+(Size) SS Shredding Disc made in Taiwan (In sizes shown below) 1 lb. VS-12GD 77049 SS Universal Hard Cheese Grater Disc made in Taiwan 1 lb. KD-(Size) N/A SS Shredding Disc made in Germany (In sizes shown below) 1 lb. KD-GD N/A SS Hard Cheese Grater / Bread Crumb Disc made in Germany 1 lb.

Size 12 Hub is 9/16" square Size 22 Hub is 3/4" square

(only for older model 80 & 140 quart mixers)

SERVICE NOTE: Our Gs-12 & VS-12 Attachments fit Hobart LEGACY Model Equipment.

The Shredder/Grater Disc hole sizes noted below are not printed to scale.

" Disc 21 lbs. " Disc 21 lbs.

0.1 lb.

SS Grater Disc

1/2”

The above parts are sold by Alfa International as replacement parts for Hobart Mixers. Alfa is not affiliated with Hobart.

914.273.2222 / 800.327.ALFA (2532) www.alfaco.com Fax 914.273.3666 / 800.328.ALFA (2532)

28

5/16”

1/4”

3/16”

5/32”

3/32”

5/64”

For Hard

Cheese only

POWER ATTACHMENTS

AVAILABLE IN

VeGetable slICer attaCHMents

For Hobart

ALFA

EXCLUSIVE

#22 HUB SIZE!

#12 and #22 Power Hubs for Mixers,

Grinders, Food Cutters and Power Drives

Our Vegetable Slicer Unit is precision machined out of polished aluminum and supplied to many major OEMs. The Stainless Steel, one-piece “S” Knife is finely honed for sharp, clean cuts. The “Knife Disc Assembly” features an adjusting knob for easy thickness calibration & cleaning. Our unit is designed for easy disassembly and equipped with a Hopper Door “safety latch”. Each Slicer Attachment is suitable for use on compatible # 12 & # 22 size hub Mixers, Meat Choppers/Grinders, Food Cutters & Power Drives. NSF approved & listed. Warranty: 6 months

VS-99P

Stainless

Steel

VS-12K

“S” Knife

VS-12KDS VS-22KDS Knife Disc

Assembly

Pusher Plate

Hardened Shaft

Adjusting

Knob

VS-99D

Door/Hopper

Thicker Gauge Aluminum

S/S Hardware

VS-99H/VS-22H

Housing

P-1005

VS-12

VS-22 Complete Assembly

Safety Note: Always Use A Pusher With These Units

replAceS

AlfA # hoBArt # DeScriptioN Weight

VS-12 VS9 #12 Complete Vegetable Slicer Attachment (9/16 Square Hub) Complete with VS-12KDS Adjustable Knife Assembly 23 lbs. VS-888

NEW!!

VS-22 VS9-22 #22 Complete Vegetable Slicer Attachment (3/4 VS-12K 79725 S/S “S” Knife only w/o Pin for ALFA VS-12KDS only - not for Hobart 1 lb. VS-12KDS ML-16223-Z #12 Knife Assembly Complete with Adjusting Knob and “S” Knife 6 lbs. VS-22KDS 294938-4 #22 Knife Assembly Complete with Adjusting Knob and “S” Knife 6 lbs. VS-99H 83486-1 #12 Back Housing with Brass Bushing and Safety Latch 9 lbs. VS-22H 24634-1 #22 Back Housing with Brass Bushing and Safety Latch 9 lbs. VS-99P 69316 Pusher/Feed Plate with Adjustable Stop 2 lbs. VS-99D 295669 Door/Hopper with Mounting Pins 4 lbs. P-1005 N/A Door Latch for VS-99H/VS-22H (With adjusting Set Screw) 0.1 lb. P-1008 N/A Size 12 Back Mounting Hub 1 lb.

NEW!! NEW!!

P-1008-22 N/A Size 22 Back Mounting Hub 1 lb.

SERVICE TIPS: Power Attachments should NEVER be operated at the highest operation speed. Clean this equipment with mild soap & water

solutions exclusively. DO NOT CLEAN in a DISHWASHER or use strong solvents, bleach and/or cleaning solutions. Doing so will warranties. ALWAYS LUBRICATE with a approved “food grade lubricant” prior to storage and/or between uses.

VS-9 BUILDUP Set of #12

Door, Housing and Pusher Plate only 16 lbs.

" Square Hub) 23 lbs.

VOID all product

Service Note: Our Gs-12 & VS-12 Attachments fit Hobart LEGACY Model Equipment

The above parts are sold by Alfa International as replacement parts for Hobart Attachments. Alfa is not affiliated with Hobart.

914.273.2222 / 800.327.ALFA (2532) www.alfaco.com Fax 914.273.3666 / 800.328.ALFA (2532)

29

POWER ATTACHMENTS

Operation & Maintenance Recommendations

VS / GS Attachments: HAND WASH ONLY, do NOT clean in the dishwasher. Commercial detergents and solvents may discolor the products anodized aluminum and will VOID the product warranty. For best performance, lubricate frequently after cleaning with USDA approved grease or oil noted on Page 56. These attachments should only be utilized under the following operating conditions: Hobart Planetary Mixers in 2nd or 3rd speed, in 1st or 2nd speed for 3 speed mixers & in 1st, 2nd & 3rd speed

for 4 speed mixers.

Please note: Use the P-1005 Latch Set Screw (see VS/GS exploded parts Diagram on page 27) to adjust the tension of the VS/GS Attachment Door Latch. This setting will ensure proper closure of the Hopper Door and maintain safety during product operation. Do NOT exert extreme pressure on the VS/GS Attachment “Pusher Plate” Handle during operation. It may snap off or break, voiding the product warranty.

Take note to ensure that the Power Attachment SHAFT of any item is seated properly INTO the HUB of the Mixer or Power Drive that you are using. If you find that the “door” of the food processor doesn’t “close” entirely or that the “disc holder, disc itself or the slicer knife blade” rubs up against the door of the unit, please “EXAMINE” the following “TWO AREAS”:

1) REMOVE ANY WASTE OR FOOD RESIDUE FROM THE HUB COUPLING RECEPTACLE. This is where the power attachment SHAFT is inserted.

2) Ensuring that this area is now free of all waste build up, please note that there is a SET SCREW at the very end of the inside

of this hub coupling collar. Please make sure that this set screw has not loosened over time during use. If it has, consult your mixer/power drive owner’s manual and review the tightening procedures for this component. Once you have done so, tighten this set screw accordingly until it rests firmly in place. This should now allow your power attachment shaft to be seated correctly into the hub coupling for proper product operation.

Meat Chopper Head: NEVER operate your Meat Chopper Attachment “dry” or without product, as it can damage your machine. For optimal performance, replace your “Feed Screw Studs & Pins” when they show signs of wear or overuse. NEVER over-tighten the Cylinder End Ring. When using a 3 speed mixer, operate this product in 3rd speed only and when using a 4 speed mixer, use 2nd speed only during operation.

Shredder & Grater Plate hole SizeS with tyPical aPPlicationS

1/2" 5/16" 1/4" 3/16" 5/32" 3/32" 5/64" Universal Disc Course Medium Medium Medium Medium Fine Extra Fine Grater Hole Plate Plate Plate Plate Plate Plate Plate Plate Sizes 000 0 2 3 5 7 9 14

Country of Origin ALFA Part Number by Shredding/Grating Disc Hole Size

Germany KD-1/2 KD-5/16 KD-1/4 KD-3/16 KD-5/32 KD-3/32 KD-5/64 KD-GD Taiwan

Food Product Type Recommended Hole Size by Product Type

Cole Slaw

Hash Browns

Bread Crumbs

Hard Vegetables

Soft Cheeses

Pizza Cheeses

Carrots for Coloring

Taco Cheeses

Hard Cheese

Spices

Nuts

VS-12SD-1/2 VS-12SD-5/16 VS-12SD-1/4 VS-12SD-3/16 VS-12SD-5/32 VS-12SD-3/32 VS-12SD-5/64 VS-12GD

Note: Stainless Steel Shredder Disc hole sizes (not drawn to scale)

1/2”

914.273.2222 / 800.327.ALFA (2532) www.alfaco.com Fax 914.273.3666 / 800.328.ALFA (2532)

30

5/16”

1/4”

3/16”

5/32”

3/32”

5/64”

SS Grater Disc

For Hard

Cheese only

CHOPPER / GRINDER ATTACHMENTS

ECONOMY ATTACHMENTS FOR HOBART

Our 12 H CCA and 12 H CRW are more economical versions of the 12 HOB76 CCA and 12 HOB76 CRW. The 12 H CCA comes complete with a Stainless Steel Pan, Stomper, 1/4” Plate, Knife, Cylinder Ring & Worm. Alfa’s #12 Plates and Knives will also fit this attachment.

Note: These attachments fit Hobart, Univex,

Toastmaster and compatible Mixers, Grinders, Food Cutters and Power Units with Hobart style size #12 Power Hub.

12 H CCA

12 SS CCA

22 H CCA

22 SS CCA

HUB ALFA # SIZE DESCRIPTION WEIGHT

12 H CCA 12 Complete Economy Chopper Attachment - Tinned #12 Hub - Uses #12 Plate & Knife 20 lbs. 12 H CRW 12 Economy Cylinder, Ring and Worm only - Tinned 13 lbs. 12 H PAN 12 Stainless Steel Pan only (oblong) 12" x 9" x 2" 3 lbs. 12HR 12 Economy Ring only - Tinned 2 lbs. 12HW 12 Economy Worm only - Tinned 2 lbs. 12 CH 12 Complete Attachment with Chrome Head 20 lbs. 12 SS CCA 12 Chopper Attachment - Stainless Steel 22 lbs. 12 SS PAN 12 Stainless Steel oblong pan, 12-1/4" x 9-1/4" x 2-1/4", with 2-1/2" O.D. Throat 3 lbs.

WORM

12 SS HST-6 12 Hollow Plastic Stomper, 1-1/2" Diameter 1 lb. 22 H CCA 22 Complete Economy Chopper Attachment - Tinned #22 Hub 25 lbs. 22 SS CCA 12 Complete Stainless Steel Chopper Attachment - #12 Hub - Uses #22 Plate & Knife 28 lbs. 22 SS PAN 12 Stainless Steel oblong pan, 14-1/4" x 9-1/4" x 2-1/2", with 2-1/2" O.D. Throat 3 lbs. 22 H PAN 22 Stainless Steel Pan only 12" x 9" x 2" 3 lbs. 22 CH 22 Complete Attachment with Chrome Head 25 lbs. 22HR 22 Economy Ring - Tinned 2 lbs. 22HW 22 Economy Worm - Tinned 2 lbs.

12 Worm / Feed Screw for 12 SS CCA 3 lbs.

12 H CRW

MEAT TENDERIZING ATTACHMENT

• Heavy duty aluminum & Stainless Steel Construction

• Easily disassembles for cleaning

• Fits on ALFA MC-12 Meat Grinder/Chopper & PB-12

Power Drive Units (page 7) and other size #12 Hobart compatible power hubs

•Dimensions: 14" L x 7" W x 9" H

•Opening: 7.5" x 1"

HUB NET\SHIP ALFA # SIZE DESCRIPTION WEIGHT

TN-12 12 Meat Tenderizing Attachment 12/14 lbs.

914.273.2222 / 800.327.ALFA (2532)

www.alfaco.com Fax 914.273.3666 / 800.328.ALFA (2532)

31

ALFA

EXCLUSIVE

HAND FOOD CHOPPERS

Our Hand Food Grinders are made of heavy duty cast iron or Stainless Steel, and are crafted to ensure durability and long life. The tin plated or Stainless Steel finish makes this equipment sanitary and attractive. They come complete with a Knife, Plate and Stuffing Tube. Our Stainless Steel Grinders come with 3 Stuffing Tubes.

10

PL A T E SH I P P I n g AL f A # HO L E SI z E S ST y L E WE I g H T

10 3/8" Clamp-on 10 lbs. 22 1/8" Screw-down 17 lbs. 32 HFG 1/4" Screw-down 28 lbs.

L A S T I c ST u f f I n g Tu b E S

P

AL f A # DE S c R I P T I O n

10PT Set of Three Plastic Tubes for #10 Chopper 22PT Plastic Tube with 3/4" opening for #22 Chopper 32PT Plastic Tube with 3/4" opening for #32 Chopper

Safety Note: Always Use A Stomper With Any Grinder

PLASTIC STOMPERS

IMPROVED

22 & 32HFG

ALFA

EXCLUSIVE

SOLID STOMPERS

Our Solid Plastic Stompers are manufactured from high impact polyethelene and are available in 3 different sizes.

Le n g t h

Ov e r a L L Un d e r aL f a # di a m e t e r Le n g t h CO L L a r

P1222 2-1/4" 10-3/8" N/A P12/22 OSHA 1-1/2" 12-1/4" N/A P32S-14 2" 19" 14”

914.273.2222 / 800.327.ALFA (2532)

32

www.alfaco.com Fax 914.273.3666 / 800.328.ALFA (2532)

HOLLOW STOMPERS

Our Hollow Stompers are injection molded from high impact tan-colored polyethelene and come in a variety of sizes to fit most Grinders.

Le n g t h

Ov e r a L L Un d e r aL f a # di a m e t e r Le n g t h CO L L a r

HST-12 2" 18" 12" HST-9 2" 15" 9" HST-6 1-1/2" 12" 6"

CHOPPER COMPONENTS

FIbre WasHers

AlfA # outSiDe hole AND Size DiMeNSioN Size

12 1-5/16" 3/4"

22-1 1/2 x 7/8 1-1/2 22-1 5/8 x 1 1-5/8 22-1 5/8 x 7/8 1-5/8 32 2" 1"

Note: Fibre Washers are now packaged and sold in bags of 12.

CHoPPer PIns

AlfA # Size

12 PIN 12 22 PIN 22 32 PIN 32

CHoPPer FeedsCreW studs

replAceS huB AlfA # hoBArt # Size

12 STD M-15877 12 22 STD M-15880 22 32 STD C-110576 32

" 7/8" " 1" " 7/8"

tHuMb sCreW asseMbly

For Hobart Model 4822

replAceS AlfA # hoBArt

HG2-704 108197-04

#

STUFFING TUBES

AlfA # huB Size hole Size oA leNgth 012BT 1/2 12 1/2" 6.4"

012BT 3/4 12 3/4 022BT 1/2 22 1/2 022BT 3/4 22 3/4 032BT 1/2 32 1/2 032BT 3/4 32 3/4 12BT 3/4 SS* 12 3/4 22BT 3/4 SS* 22 3/4 32BT 3/8 SS* 32 3/8 32BT 3/4 SS* 32 3/4

* Stainless Steel

AlfA # huB Size hole Size oA leNgth 012RT 1/2 12 1/2" 6.5"

012RT 3/4 12 3/4 022RT 1/2 22 1/2 022RT 3/4 22 3/4 032RT 1/2 32 1/2 032RT 3/4 32 3/4 10PT 12 1/2" & 3/4" 4.1" 22PT 22 3/4" 6.2" 32PT 32 3/4" 6.3"

AlfA # hole Size oA leNgth 411 3/8 3/8" 4.5"

411 1/2 1/2 411 3/4 3/4

The above parts are offered as replacement parts for Hobart, Biro, Butcher Boy, Enterprise, Universal and Choprite.

914.273.2222 / 800.327.ALFA (2532) www.alfaco.com Fax 914.273.3666 / 800.328.ALFA (2532)

" 4.6" " 5.1"

Note: Sheep casings require 1/2" size tubes & hog casings require 3/4" size tubes.

" 6.6" " 6.1" " 6.6" " 6.7" " 6.8" " 8.6" " 8.6" " 8.6" " 8.6"

" 6.0" " 5.6" " 6.3" " 6.2" " 5.6"

plastic

Alfa is not affiliated with any of these firms.

ALFA

EXCLUSIVE

Bell ShApeD tuBeS

Made of polished aluminum or Stainless Steel. For Hobart, Biro, Butcher Boy, Etc. *Recommended for Optimal Performance

regulAr ShApeD tuBeS

Made of polished aluminum. For Universal, Enterprise, Etc.

lArD preSS AND Stuffer SpoutS

Made of polished aluminum. 4-3/4" length. For 4, 6 and 8 quart Choprite and Universal Stuffers.

Note: #411 flange opening is 1.5".

33

CHOPPER KNIVES

StANDArD cArBoN Steel eDge (kN) DiSpoSABle (MADe iN gerMANy)

Though extremely competitive in price, these Knives are superior performers. L&W knives are Made in Germany from the finest drop-forged steel and hardened for added durability. Each Knife is made of one piece construction for better sanitation and to make them easy to clean. L&W knives are ideal for restaurants, delis, hotels, butcher shops and supermarkets.

replAceS tip-to-tip

Hard Steel

AlfA # hoBArt # huB Size MeASureMeNt

005 KN N/A 5 1.80" 008 KN N/A 8 2.20 012 KN 290339 12 2.40 022 KN 121144 22 2.90 032 KN 15796 32 3.60

" " " "

Sharper Edges

ECONOMY (EK) CHOPPER KNIVES – STANDARD CARBON STEEL (MADE IN GERMANY)

tip-to-tip AlfA # hoBArt # huB Size MeASureMeNt

012 EK E 290339 12 2.40" 022 EK C 121144 22 2.90 032 EK P 15796 32 3.60 052 EK N/A 52 4.75

" " "

ALFA

EXCLUSIVE

hArD eDge (kNh) re-ShArpeNABle (MADe iN Mexico)

These Knives are engineered for heavy duty operations and extended life. Made of high strength hardened tool steel, these Knives have broached center holes which significantly decreases stud wear. Cutting bars are attached by cadmium free induction brazing. These features provide greater durability and provide for easier cleaning. Ideal for all large volume grinding operations or high horsepower machinery.

tip-to-tip AlfA # huB Size MeASureMeNt

012 KNH 12 2.40" 022 KNH 22 2.90 032 KNH 32 3.60 052 KNH 52 4.60

S/S CHOPPER KNIVES FOR

" " "

#

12, #22 & #32 ALFA ATTACHMENTS

Reinforced Bar

tip-to-tip AlfA # huB Size MeASureMeNt

12 KN SS 12 2.50" 22 KN SS 22 3.00 32 KN SS 32 3.60

NEW!!

"

NEW!! NEW!!

"

NEW!!

The above parts are sold by Alfa International as replacement parts for Hobart and others. Alfa is not affiliated with Hobart.

914.273.2222 / 800.327.ALFA (2532) www.alfaco.com Fax 914.273.3666 / 800.328.ALFA (2532)

34

ALFA

EXCLUSIVE

Tool Steel for Long Life

MADE in GERMANY of SPECIAL HARD TOOL STEEL

CHOPPER PLATES

(chrome-vandium steel alloy)

More Holes for Faster Grinding

Precision Holes for Uniform Cuts

AlfA huBleSS chopper plAteS

Alfa Chopper Plates are made in Germany from a special chrome-vanadium steel alloy (58-60 HRC) for extremely long life. Using computerized drilling for plate-to-plate conformity, the maximum number of holes are drilled into each Plate to provide for greater production and cooler, more efficient cutting.

Alfa Plates are also economical because our Hubless Plates can be used on both sides and will fit many different brands of Choppers (see Reference Chart on next page).

NEW!!

chopper plAteS With huB

ADe iN gerMANy of StroNg tool Steel.

M

e-ShArpeNABle.

r

HUB STYLE ALFA # HUB SIZE Inches MM

12 332 HUB 12 3/32 12 532 HUB 12 5/32 22 332 HUB 22 3/32 22 532 HUB 22 5/32 32 018 HUB 32 1/8 32 332 HUB 32 3/32 32 532 HUB 32 5/32 32 316 HUB 32 3/16 32 014 HUB 32 1/4 32 038 HUB 32 3/8 32 012 HUB 32 1/2

Note: Other sizes available, call for details & prices.

HOLE SIZE

" 2.5 " 4.0 " 2.5 " 4.0 " 3.0 " 2.5 " 4.0 " 4.5 " 6.0 " 10.0 " 13.0

Hub Style for More Support

HUBLESS STYLE

HOLE SIZE REPLACES

ALFA # HUB SIZE Inches MM HOBART

5 1/8 HBLS 5 1/8 5 3/16 HBLS 5 3/16 8 1/8 HBLS 8 1/8 8 3/8 HBLS 8 3/8 8 3/16 HBLS 8 3/16 12 3/32 HBLS 12 3/32 12 1/8 HBLS 12 1/8 12 5/32 HBLS 12 5/32 12 3/16 HBLS 12 3/16 12 1/4 HBLS 12 1/4 12 5/16 HBLS 12 5/16 12 3/8 HBLS 12 3/8 12 1/2 HBLS 12 1/2 12 5/8 HBLS 12 5/8 12 3/4 HBLS 12 3/4 22 3/32 HBLS 22 3/32 22 1/8 HBLS 22 1/8 22 5/32 HBLS 22 5/32 22 3/16 HBLS 22 3/16 22 1/4 HBLS 22 1/4 22 5/16 HBLS 22 5/16 22 3/8 HBLS 22 3/8 22 1/2 HBLS 22 1/2 22 3/4 HBLS 22 3/4 32 3/32 HBLS 32 3/32 32 1/8 HBLS 32 1/8 32 5/32 HBLS 32 5/32 32 3/16 HBLS 32 3/16 32 1/4 HBLS 32 1/4 32 3/8 HBLS 32 3/8 32 1/2 HBLS 32 1/2 32 3/4 HBLS 32 3/4

N/A = Not available from factory

" 3.0 N/A

" 4.5 N/A " 3.0 N/A " 10.0 N/A

" 4.5 N/A

" 2.5 N/A " 3.0 16423-1

" 4.0 N/A

" 4.5 16424-1 " 6.0 16425-1

" 7.8 N/A " 10.0 16426-1 " 13.0 16427-1 " 16.0 103970 " 20.0 N/A

" 2.5 N/A " 3.0 16430-1

" 4.0 N/A

" 4.5 16431-1 " 6.0 16432-1

" 7.8 N/A " 10.0 16433-1 " 13.0 16434-1 " 20.0 N/A

" 2.5 N/A " 3.0 108580

" 4.0 N/A

" 4.5 108581 " 6.0 108582 " 10.0 108583 " 13.0 108584 " 20.0 N/A

NEW

KIDNEY PLATES – HUBLESS STYLE

ALFA

#

HUB SIZE # HOLES HOLE SIZE

12 KIDNEY 12 3 1-3/8 22 KIDNEY 22 3 1-3/4 32 KIDNEY 32 3 2

#

!!

" "

"

The above parts are sold by Alfa International as replacement parts for Hobart and others. Alfa is not affiliated with Hobart.

914.273.2222 / 800.327.ALFA (2532) www.alfaco.com Fax 914.273.3666 / 800.328.ALFA (2532)

35

CHOPPER KNIFE AND PLATE

CROSS REFERENCE CHART

kNife AND MAke AND MoDel plAte Size

AMERICAN

6212 12

BEEM

GIGANT EFS-10, CSN 12

BERKEL

E-012 12 E-122, E-222 22 E-2732 32

BIRO

812 12 22, 722, 822, 922 22 342, 346, 548, 6642 32 7542, 7548, AFMG-48-2 32 542, 7500 32

BLAKESLEE

CC20S 12

BUFFALO

41B 22

BUTCHER BOY

TCA12, TM12 12 TCA22, TM22 22 TCA32, TM32 / 232, A42 32

CHOP RITE

210 12 310 22 510 32

ENTERPRISE

5 5 10, 2112, 2512, 2612, 2712 12 422, 2522, 2622, 2722 22 30, 041, 341, 432, 1041, 1541, 2532 32 2632, 2732, 2742, 2746, 2842 32

GENERAL SLICING

LP25-C 5 D, H, P 12 E 22

HG286 Wrench for Grinder Rings (Floor Models)

SerVice tipS

• Tighten the End Ring hand-tight only.

• Always use the same Knife and Plate together. Always use a new knife with

a new plate or side.

• Never operate Grinder without meat or some lubricant, such as mineral oil, present on the Plate surface.

kNife AND MAke AND MoDel plAte Size

GLOBE - STIMPSON

5412, 5511 12 2522, 422D, 5522, 5622, 5822, 6722 22 5932, 6142, 6832 32 6942, 8142, 842D 32

HOBART

56, 200, 212, F230, 612, 725, 4212 12 4312, 4412, 4612, 4812, 5113 12 622, 4322, 4722, 4822 22 4145, 4146, 4245, 4246, 4332 32 4342, 4346, 4732,

5425, MC-46

HOLLYMATIC

4531, 4532, 4542, 4632

32

1000 12 22S, 1200 22 32S, 2-32S, 542, 1332 32 150, Gemini, 175 32

INTEDGE

C3H, C2HA, CSH, C2HDS 12 C1H, C1HDS 22

JUPITER

863 12

KREFFT

R-70 12

SANITARY

100, 101, 600, S612, 900 12 200, 201, 1250, 1275 22 2800, 3800, 4000 32

THUNDERBIRD

300E, TX600 12 400E 22

TORREY

M-12, M-12-FS 12 M-22, M-22-R 22 M-32 32

UNIVEX

MG8912 12

AlfA plAte SpecificAtioNS

PLATE PLATE PLATE SIZE # NOTCHES DIAMETER THICKNESS

5 1 2.10" .26" 8 1 2.40" .26" 12 1 2.75" .32" 22 1 3.25" .36" 32 3 3.90" .43"

Note: Alfa Plates are round with no flat sides.

914.273.2222 / 800.327.ALFA (2532) www.alfaco.com Fax 914.273.3666 / 800.328.ALFA (2532)

36

ROBOT COUPE FOOD PROCESOR

STAINLESS STEEL BLADE ASSEMBLY

ALFA

EXCLUSIVE

The above parts are sold by Alfa International as replacement parts for Robot Coupe Food Processors. Alfa is not affiliated with Robot Coupe.

Cost effective replacements for Robot Coupe blade assemblies. Our Stainless Steel blades have beveled edges and the hubs are made of durable, food safe white plastic - just like the OEM components.

replAceS fitS AlfA # roBot coupe

RC-1 R3029, R1752 (Old) R-172, R-300, R-301V-B&C (for hex shaft) RC-2 R203 R-2, R-2N, R-2U (for round shaft with 1 flat side)

Note: Both assemblies include Plastic Cap (RC# R3030).

#

MoDelS

GRINDER KNIFE AND PLATE TIPS

1. Do not run your grinder dry or the heat build up will damage your plate and knife.

2. Do not over-tighten the end ring. This will strain your machine and cause plate & knife failure or worse. Hand-tighten only.

3. Always match your plate and knife for best operation. Replace your knife when you replace your plate for peak performance.

4. Replace your feedscrew stud if you see any wobble when the knife rotates. This will cause uneven knife and plate wear and could damage your grinder plate pin.

5. Clean your grinder head often and lubricate all parts with a coat of NSF approved oil (see pages 56 & 57).

914.273.2222 / 800.327.ALFA (2532) www.alfaco.com Fax 914.273.3666 / 800.328.ALFA (2532)

37

PROFESSIONAL MANUAL MEAT TENDERIZERS

NEW

!!

Made In

Italy

Our Italian designed meat tenderizer features several ergonomic advancements, ensuring ease of use, reduced user fatigue and optimal performance. The elongated frame highlights a wider handle for increased stability during operation. This allows the user to use “two” hands during operation, resulting in a greater distribution of uniform pressure when performing each cycle. Each tenderizing process covers a 30" square area. Made entirely of Stainless Steel, the tenderizer head features 32 separate removable & replaceable blade “strips”. This eliminates the need to remove the entire blade strip carriage. The design of the blade strip is also patented and unique in the market, as each blade tip resembles a “two-prong knife tip”, versus typical needle point blade strips. With each activation, the product is tenderized with small slits, versus tiny needle impressions. This affords better penetration of seasonings during preparation, marination & cooking. Each unit comes with a removable

11.9" x 17.75" food safe poly cutting board for easy clean up, sanitation & safe transport of tenderized products. Completes tasks without shredding or tearing of meat ﬁbers, delivering tender, eye appealing and easy to cook & consume products. The bright red polytenderizing surface rolls on a sealed ball bearing carriage.

Warranty: 1 year & CE Certiﬁed / Approved

Net/ShippiNg DiMeNSioNS DiMeNSioNS AlfA # DeScriptioN Weight StANDiNg BoxeD

ALFA TREX Stainless Steel Manual Meat Tenderizer 64 / 78 lbs. 35-11/16" x 18-1/2" x 14-5/8" 22" x 28-1/2" x 31"

NEW

This manual meat tenderizer is equipped with 544 surgical Stainless Steel knives and tenderizes without tearing meat ﬁbers or changing the shape of your meat products. Patented stripper frame design provides for easy removal, installation & cleaning of the surgical Stainless Steel blade set. The tenderizer is adjustable to accommodate nearly any product height. Designed to fully tenderize a 29.75 square inch area with every operation.

Standard Features:

• Patented stripper frame affords ease of blade cleaning/swapping

• Patented “T Safety Lock” ensures unit alignment without damage

• Sliding board w/safety guard & handle for easy product handling

• Simple Sanitation & Maintenance - no tools needed for cleaning

• Stainless Steel Construction

Optional Features:

• Stainless Steel Stand with wheels for easy mobility

!!

Warranty: 1 year & NSF Certiﬁed

Net/ShippiNg DiMeNSioNS DiMeNSioNS AlfA # DeScriptioN Weight StANDiNg BoxeD

ALFA JMTH Stainless Steel Manual Meat Tenderizer 66 / 84 lbs. 40" x 16" x 16-3/4" 26-1/4" x 21" x 26-3/4"

914.273.2222 / 800.327.ALFA (2532) www.alfaco.com Fax 914.273.3666 / 800.328.ALFA (2532)

38

STAINLESS STEEL SAUSAGE STUFFERS

NEW!!

SS26VHD

Made In

Italy

Cylinder Safety Lock

SS16HHD

Direct Fill Cylinder

S/S Ball Bearings

Our “Heavy Duty” vertical sausage stuffer is manufactured using AISI 304 Stainless Steel. The cylinder is double welded on the bottom plate and has Nylon Pistons with an air exhaust valve. The gear box is constructed of galvanized steel, while the gears are made of tempered steel and travel on 4 sealed Stainless Steel bearings. Equipped with a 2 speed gear reducer and comes standard with Fixing Clamp and (3) Nylon Stufﬁng tubes.

Cylinder Length & Diameter (Vertical 15"/7.9" / Horizontal 14.5"/6.5") Warranty: 1 year parts

Cylinder Pivot System

AlfA # DeScriptioN cApAcity Net/Ship Weight DiMeNSioNS

SS26VHD Heavy Duty 12 Liter Vertical Sausage Stuffer 26 lbs. 64/69 lbs. 47-1/4" L x 17-3/4" W x 19-3/4" H SS16HHD Heavy Duty 8 Liter Horizontal Sausage Stuffer 16 lbs. 46/51 lbs. 26-3/4

These economical Stainless Steel Sausage Stuffers are ideal for small, light duty commercial and/or household use. All major components are made of durable Stainless Steel (cylinder, base, frame, couplings & plunger). All models are equipped for 2 speed operation, ensuring ease of use and fast plunger retraction. Complete with set of (4) Stainless Steel stuffing tubes (10, 16, 22 & 32mm sizes). Warranty: 6 months parts

AlfA # cApAcity ShippiNg Weight uNit DiMeNSioNS

SS5H 5 lbs. 20 lbs. SS10H 10 lbs. 24 lbs. SS15H 10 lbs. 28 lbs. SS5V 5 lbs. 23 lbs. SS10V 10 lbs. 26 lbs. SS15V 15 lbs. 31 lbs. SS20V 20 lbs. 33 lbs. SS25V 25 lbs. 35 lbs. SS30V 30 lbs. 39 lbs.

17" L x 8-1/2" W x 8" H

27" L x 8-1/2" W x 8" H 31" L x 8-1/2" W x 8" H

8-3/4" L x 11-3/4" W x 20-3/4" H

10-1/2" L x 11-3/4" W x 25-1/2" H

12" L x 12" W x 31" H 13-1/2" L x 14-1/2" W x 24" H 13-1/2" L x 14-1/2" W x 26" H 13-1/2" L x 14-1/2" W x 31" H

Easy Refill Design

Two Speeds

" L x 9-1/2" W x 7-7/8" H

SS TUBE SET 4 Pieces with 10, 16, 22 & 32mm Holes

Stainless Steel Tubes

914.273.2222 / 800.327.ALFA (2532) www.alfaco.com Fax 914.273.3666 / 800.328.ALFA (2532)

39

STAINLESS STEEL MIXING BOWLS

FOR HOBART MIXERS

No Sharp Edges

Thicker Stainless Steel

THE HIGHEST QUALITY BOWLS AVAILABLE

• Made by the American OEM for more than 50 years

• Meets all NSF and US Government specifications

• Heavy gauge 304 Stainless Steel (will not discolor product)

• True one piece construction

• Full support band on 30 quart and larger models

• Thick bottom ring on 60 quart and larger models

• Satin finish resists scratches

• Warranty: 1 year

c

A

l

D

h

fitS MoDelS

(Not for legAcy MoDelS)

AlfA # replAceS quArt groSS hoBArt # cApAcity Weight

c

1

2

3

1

0

2

0

t

0

–

D

f

t

0

– f

D

3

0

3

4

0

–

D

t

10 BWSS 275681 10 6 lbs. x x 12 BWSS 295643 12 7 lbs. x x 12 BWSSA* 295644 12 7 lbs. x x x x x 20 BWSS 275683 20 11 lbs. x x x x x 30 BWSS 437410 30 19 lbs. x x x x 30 BWSSA* 295648 30 19 lbs.

x x x x x x x x 40 BWSS 315245 40 25 lbs. x 40 BWSSA* 275686 40 25 lbs.

x x x x x x x x 60 BWSS 275688 60 35 lbs. x x x x x x x x 80 BWSS 275690 80 45 lbs. x x x x x x x x x 140 BWSS 295651 140 65 lbs. x x

Serivce Note: The ALFA part numbers ending in “A*” indicate that these bowls can fit onto mixers with different capacities & are considered to

be “Adaptable”. “A*”Adaptable Mixing Bowls require a “Bowl Adapter” to fit the sizes indicated. (e.g. our Part # 12 BWSSA 12 quart Bowl will fit any of the 20 Quart Mixers noted above.) The Mixing Bowls shown on this page DO NOT fit Hobart Legacy Mixers. See page 42 for Legacy Mixing Bowls.

ALFA BOWLS ALSO FIT THE MIXERS NOTED BELOW

20 QUART Berkel BA20, Intedge MX20, Powermaster A-20, Toastmaster A-200, McGraw Edison 5020, Thunderbird ARM-02 30 QUART Intedge MX30, Toledo 5030 | 60 QUART Intedge MX60

p

6

0

6

0

D

ALFA

EXCLUSIVE

Better Welds

Heavier Band

Stronger Ring

l

M

V

8

0

0 D

V

8

1

0

4

2

0

1

1 u

t 8 0 1

DELUXE SOLID CAST ALUMINUM BOWL DOLLY / TRUCK

replAceS groSS fitS AlfA # hoBArt # Weight MoDelS

7" High

12-1/2"

Inside

HMBT-223* 315013 22 lbs. All Models, 40 to 140 quart

Note: Each Dolly is equipped with “Heavy Duty” Polypropylene Casters and Galvanized Hardware

*Also fits Hobart Legacy Mixer Bowls and 30-80 quart Univex Mixer Bowls.

17" Wide

MIXING BOWL ADAPTERS

60 to 30 Quart and 80 to 40 Quart

Note: These parts DO NOT fit Hobart Legacy Mixers.

replAceS groSS fitS AlfA # hoBArt # Weight MoDelS

60-30BA 62807-1 20 lbs. 60,80 and 140 80-40BA 24653-1 25 lbs. 80 and 140

The above parts are sold by Alfa International as replacement parts for Hobart Mixers. Alfa is not affiliated with Hobart.

914.273.2222 / 800.327.ALFA (2532) www.alfaco.com Fax 914.273.3666 / 800.328.ALFA (2532)

40

Solid Cast Aluminum

Heavy Duty Casters

Strong Tinned Cast Iron

30DS

30D

AGITATORS FOR HOBART MIXERS

SPIRAL DOUGH HOOKS (“ED” STYLE)

AlfA # replAceS Mixer Weight hoBArt

#

cApAcity

20DS 275931 20 qts. 2 lbs. 30DS 275889 30 qts. 3 lbs. 60DS 295174 60 qts. 10 lbs.

* 295171 80 qts. 18 lbs.

80DS

* 295131 140 qts. 31 lbs.

140DS

“J” DOUGH HOOKS (“E” STYLE)

AlfA # replAceS Mixer Weight hoBArt # cApAcity

12D 275930 12 qts. 2 lbs. 20D 295119 20 qts. 3 lbs.

30D 295120 30 qts. 6 lbs. 30DA 275458 60+ qts. 6 lbs. 40DA 295176 60+ qts. 8 lbs. 60D 295175 60 qts. 10 lbs.

* 275466 80 qts. 18 lbs.

80D

30 Quart Adaptable Hook fits 60 Quart Mixers 40 Quart Adaptable Hook fits 80 Quart Mixers

Note: Not for Legacy Models

ALFA

EXCLUSIVE

For mixing yeast-raised dough requiring folding and stretching. Available in regular or effective spiral design to provide smoother mixer operation. Spiral “ED” Style Hooks are best for pizza and other heavy doughs. Both style Hooks are solid cast aluminum.

* indicates a brass insert for longer life

30W

Stainless Steel Wires

30B

NEW!!

STAINLESS STEEL WHIPS (“D” STYLE)

AlfA # replAceS Mixer Weight hoBArt

#

cApAcity

12W 275895 12 qts. 3 lbs. 20W 275897 20 qts. 4 lbs. 30W 275899 30 qts. 4 lbs. 30WA 439740 60+ qts. 5 lbs. 40WA 295157 60+ qts. 7 lbs. 60W 295154 60 qts. 7 lbs. 80W 295149 80 qts. 10 lbs. 140W 295143 140 qts. 15 lbs.

FLAT BEATERS/PADDLES (“B” STYLE)

AlfA # replAceS Mixer Weight hoBArt

#

cApAcity

10B 275455 10 qts. 1 lb. 12B 275549 12 qts. 3 lbs. 20B 275459 20 qts. 4 lbs. 30B 275450 30 qts. 5 lbs. 30BA 275809 60+ qts. 5 lbs. 40BA 275447 60+ qts. 6 lbs. 60B 275885 60 qts. 7 lbs. 80B 275448 80 qts. 10 lbs. 140B 275883 140 qts. 15 lbs.

For aerating light mixes including whipped cream, egg whites, icing, meringues and mayonnaise. Wire Loop Whips feature a solid cast aluminum base with Stainless Steel wires.

30 Quart Adaptable Whip fits 60 Quart Mixers

40 Quart Adaptable Whip fits 60, 80 and 140 Quart Mixers

60 Quart Adaptable Whip fits 80 and 140 Quart Mixers

For creams, smooth cake and cookie batters, icings, potatoes and vegetables. Can be used for general light work. These Heavy Duty Flat Beaters are cast in solid aluminum.

Steep Shouldered Style Like Hobart 30 Quart Adaptable Beater fits 60 Quart Mixers

40 Quart Adaptable Beater fits 60, 80 and 140 Quart Mixers

PASTRY KNIVES (“P” STYLE)

AlfA # replAceS Mixer Weight hoBArt

#

cApAcity

20P 275467 20 qts. 3 lbs. 30P 275972 30 qts. 4 lbs.

30P

Note: A part number ending in “A” indicates that this agitator is considered “ADAPTABLE” and will fit on different size mixers.

20P

The above parts are sold by Alfa International as replacement parts for Hobart Mixers. Alfa is not affiliated with Hobart.

914.273.2222 / 800.327.ALFA (2532) www.alfaco.com Fax 914.273.3666 / 800.328.ALFA (2532)

With these Pastry Knives it is possible to combine delicate ingredients without over-developing. Made of cast aluminum.

41

NEW!!

STAINLESS STEEL MIXING BOWLS

For HOBART LEGACY® Mixers

• OEM not Aftermarket Equipment

• One Piece Construction

• Highest Quality - Heavy Guage #304 Stainless Steel

• Warranty: 1 year

BoWl ShippiNg AlfA # hoBArt # cApAcity Weight

L20 PLBW (Plastic) N/A 20 qts. 6 lbs. L20 SSBW 874834 20 qts. 12 lbs. L30 SSBW 916616 30 qts. 20 lbs. L40 SSBW 916615 40 qts. 25 lbs. L60 SSBW 875604 60 qts. 35 lbs. L80 SSBW 875746 80 qts. 45 lbs. L140 SSBW 875845 140 qts. 66 lbs.

HOBART LEGACY® MIXER AGITATORS

(Note: OEM not Aftermarket Equipment)

NEW!!

BATTER BEATERS

Mixer ShippiNg AlfA # hoBArt

L20 BP 874790 20 qts. 4 lbs. L30/40 BP 916372 30/40 qts. 6 lbs. L60 BP 874172 60 qts. 7 lbs. L80 BP 916095 80 qts. 10 lbs. L140 BP 874409 140 qts. 15 lbs.

#

cApAcity Weight

SPIRAL DOUGH HOOKS

Mixer ShippiNg AlfA # hoBArt

L20 SDH 874791 20 qts. 2 lbs. L30/40 SDH 916618 30/40 qts. 5 lbs. L60 SDH 874285 60 qts. 10 lbs. L80 SDH 874647 80 qts. 18 lbs. L140 SDH 875847 140 qts. 31 lbs.

#

cApAcity Weight

STAINLESS STEEL WHIPS

Mixer ShippiNg AlfA # hoBArt

L20 WHP 874792 20 qts. 4 lbs. L30/40 WHP 916421 30/40 qts. 7 lbs. L60 WHP 874190 60 qts. 7 lbs. L80 WHP 875866 80 qts. 10 lbs. L140 WHP 875863 140 qts. 15 lbs.

#

cApAcity Weight

Note: All products on this page are Hobart O.E.M. items and fit Hobart Legacy@ Mixers.

914.273.2222 / 800.327.ALFA (2532) www.alfaco.com Fax 914.273.3666 / 800.328.ALFA (2532)

42

STAINLESS STEEL MIXER BOWLS

For Mixers

univex®

• univex® OEM Equipment

• One Piece Construction

• Highest Quality - Heavy Guage #304 Stainless Steel

• Warranty: 1 year

quArt groSS AlfA # uNiVex # cApAcity Weight fitS MoDelS

20 UBW 1020091 20 11 lbs. SRM20, SRMF20 30 UBW 1035023 30+ 19 lbs. SRM30 60 UBW 1061192 60+ 35 lbs. SRM60 80 UBW 1080013 80+ 45 lbs. SRM80

Note: These Mixing Bowls will only fit Univex Mixer Models manufactured in 1985 and later.

ALFA part #HMBT-223 (Bowl Dolly/Truck) will fit all Univex Mixer Bowl sizes.

univex® OEM AGITATORS

BATTER BEATERS

Mixer ShippiNg AlfA # uNiVex

20UB 1023083 20 qts. 4 lbs. 30UB 1033107 30 qts.+ 5 lbs. 60UB 1061083 60 qts.+ 7 lbs. 80UB 1080020 80 qts.+ 10 lbs.

#

cApAcity Weight

SPIRAL DOUGH HOOKS

Mixer ShippiNg AlfA # uNiVex

20UD 1023089 20 qts. 2 lbs. 30UD 1033225 30 qts.+ 3 lbs. 60UD 1061089 60 qts.+ 10 lbs. 80UD 1080034 80 qts.+ 18 lbs.

#

cApAcity Weight

STAINLESS STEEL WHIPS

Mixer ShippiNg AlfA # uNiVex

20UW 1020095 20 qts. 4 lbs. 30UW 1030111 30 qts.+ 4 lbs. 60UW 1061095 60 qts.+ 7 lbs. 80UW 1080033 80 qts.+ 10 lbs.

Note: All products on this page are Univex O.E.M. items and fit mixers manufactured in 1985 and later.

914.273.2222 / 800.327.ALFA (2532) www.alfaco.com Fax 914.273.3666 / 800.328.ALFA (2532)

#

cApAcity Weight

43

POLY MIXER ACCESSORIES

Made of White Polyethylene Plastic

ShippiNg AlfA # DeScriptioN Weight

20BW 20 Quart Plastic Bowl with SS Side Band 5 lbs.

Fits Hobart A200 Quart Mixer but not Legacy Models.

20BWR Plastic Bowl Only 4 lbs. L20 PLBW

NEW!!

ATTACHMENT APPLICATION FOOD PRODUCTS RECOMMENDED SPEEDS

Poly Mixer Bowl for 20 Quart Legacy Mixer 6 lbs.

Mixer aGitator aPPlicationS

“B” Style Flat Beater

• Multi purpose agitator

• Mashing potatoes

• Mixing cakes

• Icings

20BW

• Use 1st speed for starting

• Medium speed for finishing

L20 PLBW

For Legacy

NEW!!

“D” Style Wire Whip

“E” Style J Dough Hook

“ED” Style Spiral

Dough Hook

“P” Style Pastry Knife

• Maximum blending of air into light products

• Mixing

• Folding

• Stretching dough in 5-40 qt. mixers

• Mixing

• Folding

• Stretching dough in 20-140 qt. mixers

• Cutting action for combining ingredients

• Whipping cream

• Beating egg whites

• Breads

• Pizza Dough

• Breads

• Pizza Dough

• Pastry dough

• Pie dough

• 2nd & 3rd speeds for 3 speed mixers

• 3rd & 4th speeds for 4 speed mixers

• 1st & 2nd speeds for 2 & 3 speed mixers

• 1st, 2nd & 3rd speeds for 4 speed mixers

• 1st & 2nd speeds for 2 & 3 speed mixers

• 1st, 2nd & 3rd speeds for 4 speed mixers

• For stirring use low speeds

• For cutting use medium speeds

914.273.2222 / 800.327.ALFA (2532) www.alfaco.com Fax 914.273.3666 / 800.328.ALFA (2532)

44

!!

HAMBURGER PATTY PRESSES

Made In

NEW

We offer 4 simple and compact hamburger press models, ranging from 4 to 7 inch diameters. Our presses are constructed of anodized aluminum alloy to ensure satisfactory hygiene and durability for cleaning. Each press features a built-in Portion Sheet Holder, ensuring quick, convenient and efﬁcient operation. Durable rubber feet maintain each units stability during production. Lubricated gears facilitate smooth and effortless operation. For ease of use, each press has been designed with a patty piston “release button”. Certiﬁed with CE approval.

Warranty: 2 years

Italy

AlfA # DeScriptioN Net/ Ship Weight DiMeNSioNS - StANDiNg/BoxeD (Wxhxl)

ALFA P4 4" Diameter - Hamburger Patty Press 10.4 lbs./11.7 lbs. 5-1/2" W x 10-1/4" H x 10-5/8" L

11" W x 11-13/16" H x 11-13/16" L

ALFA P5 5" Diameter - Hamburger Patty Press 10.8 lbs./12 lbs. 5-1/2" W x 10-3/4" H x 12-1/4" L

11" W x 11-13/16" H x 11.8" L

ALFA P6 6" Diameter - Hamburger Patty Press 16.5 lbs./19 lbs. 5-1/2" W x 10-3/4" H x 13" L

15-3/4" W x 16-7/8" H x 14-1/2" L

ALFA P7 7" Diameter - Hamburger Patty Press 16.5 lbs./18.7 lbs. 5-1/2" W x 10-3/4" H x 13" L

15-3/4" W x 16-7/8" H x 14-1/2" L

BEEF PATTY MAKER

Our Beef Patty Maker is an excellent choice for low volume, cost conscious food service operations. It offers the performance and durability of units costing twice as much and features:

• Heavy duty cast aluminum construction

• Baked enamel finish

• Comes complete with plastic liner and 2 patty molds

• Holds up to 100 sheets of 2 hole drilled 5-1/4" x 5-1/4" wax paper (not included)

• Gray mold will make 3.2-4.0 oz. patties

• Green mold will make 1.8-2.7 oz. patties

12-1/4" Long

ALFA

EXCLUSIVE

5-1/2" Tall

PM-1

AlfA # DeScriptioN Weight

PM-1 Hand Operated Patty Maker, 5-1/2" H x 7-5/8" x 12-1/4" L 6 lbs. M-14 Replacement Plastic Liner for PM-1 1 lb.

Note: Both models are 5.25" in diameter

914.273.2222 / 800.327.ALFA (2532) www.alfaco.com Fax 914.273.3666 / 800.328.ALFA (2532)

7-5/8" High

Extra Mold

45

Support

FRENCH FRY CUTTER - POTATO WEDGER

Alfa French Fry Cutters are real work-horses. They cut up to 50 lbs. of potatoes an hour in any of 3 different cut sizes and convert easily to make potato wedges. Our cutters accommodate potatoes up to 3"

Handle

Blade Frame

Assembly

ALFA

EXCLUSIVE

Block

NEW!! NEW!!

NEW!! NEW!! NEW!!

in diameter and 5" long. Features include:

• Heavy duty aluminum frame

• Stainless Steel tray and blades

• Durable metal alloy handle

• Mounts to table or wall

AlfA # DeScriptioN Weight FF1 Manual French Fry Cutter - 3/8" (French Fry Size) 12 lbs.

FF2 Manual French Fry Cutter - 1/4 FF3 Manual French Fry Cutter - 1/2 FF1 FRAME Replacement Blade Frame Assembly - 3/8 FF2 FRAME Replacement Blade Frame Assembly - 1/4 FF3 FRAME Replacement Blade Frame Assembly - 1/2 FF1 PB Replacement Pusher Block - 3/8 FF2 PB Replacement Pusher Block - 1/4 FF3 PB Replacement Pusher Block - 1/2” ––– WEDGER FRAME 8 Piece Potato Wedger Blade (Fits All Models) ––– WEDGER BLOCK 8 Piece Potato Wedger Pusher (Fits All Models) ––– FF-01 Replacement Handle ––– FF-02 Bolt - 3/8" x

6" for Fry Cutter ––– FF-09 Pusher Plate Support ––– FF-11 Bracket with Screws for FF-09 Pusher Plate ––– FF-12 Screw - 5/16" x

1" for Fry Cutter ––– FF-14 Nut - 3/8" for Fry Cutter Handle Bolt ––– FF-ROD Slide Rod for French Fry Cutter –––

" (Shoestring) 12 lbs. " (Steak Fries) 12 lbs.

" Cut ––– " Cut –––

" Cut ––– " ––– " –––

Technical Tip:

Use potatoes that are at room temperature.

Blade Frame Assembly

• Warranty: 6 Months

Pusher Block

MANDOLINE VEGETABLE SLICER

Our Mandoline Slicer is manufactured of Stainless Steel. It is equipped with a safety guard and folds for easy storage. This Mandoline Slicer is capable of slicing, shredding, waffle and julienne cuts. It includes 3 blades - 3mm, 10mm and 5mm spacing.

ALFA # DESCRIPTION WEIGHT DIMENSIONS SHIPPING DIMENSIONS

MAND01 Mandoline Vegetable Slicer 4 lbs. 15.5" L x 4.5" W x 9.5" H 16.25" L x 5.75" W x 3.5" H

914.273.2222 / 800.327.ALFA (2532) www.alfaco.com Fax 914.273.3666 / 800.328.ALFA (2532)

46

ECO1

ECO2

CAN OPENERS & PARTS

The standard in food service operations. Made of tough plated steel, the ECO1 has an 11” slide bar (also accepts the 17” slide bar shown below). It opens most sizes and styles of cans and is ideal for operations using up to 50 cans per day.

The smaller ECO2 features the same tough construction with a 9” slide bar (also accepts the 12” slide bar shown below). It is suitable for operations using up to 15 cans per day.

Model eCo1

AlfA # eDluND # DeScriptioN ECO1 #1 Can Opener with 11" Slide Bar

1EKN K004SP Knife (Reversible) 1EARB A025 Arbor 1ESB11 B011 11 1ESB17 B010 17 1EBP A930SP Base Holder with Screws 1EKNH A513 Knife Holder Assembly 1EGR G003SP Gear 1EBUS B119-3 Bushing 1ESP S150-3 Spring 1EW W036 Washer

" Slide Bar " Slide Bar

AlfA # eDluND # DeScriptioN ECO2 #2 Can Opener with 9” Slide Bar

2EKN K005SP Knife (Reversible) 2EARB A026 Arbor 2ESB09 B012 9 2ESB12 B009 12 2EBP A932SP Base Holder with Screws 2EKNH A518 Knife Holder Assembly 2EGR G004SP Gear 2EBUS B121-3 Bushing-sold as EA. 2ESP S151-3 Spring-sold as EA. 2EW W037 Washer

Model eCo2

" Slide Bar

SALAD SPINNERS

Our heavy duty, FDA approved plastic Salad Spinners/Dryers, are designed & engineered to provide durability, reliability & safety for commercial food service environments. They come equipped with a patented & innovative “Braking System”, which is designed to protect and increase product life. The sealed gearbox ensures a sanitary environment and is available in either a 2.5 or 5 gallon capacity. A 2.5 gallon unit can accommodate 2-3 heads of lettuce. Both units feature convenient side handles for quick and safe transport. A comfortable ergonomic “ﬁnger grip” handle on the crank, minimizes operator fatigue & maximizes productivity. Each spinner can be spun clockwise or counter clockwise. The crank shaft is constructed of “rust” resistant commercial grade aluminum. Each dryer is ready to use right out of the box, as no assembly is required. Your red salad spinner comes with ETL certiﬁcation which conforms to NSF / ANSI Standard 2. Warranty: 1 Year Parts & Labor.

NEW

!!

AlfA # DeScriptioN Net/ ShippiNg Weight DiMeNSioNS

ALFA SS5 Commercial 5 Gallon Salad Spinner / Dryer 13.25/15 lbs. 23-3/4" x 17-1/4" x 17-1/4" ALFA SS2.5 Commercial 2.5 Gallon Salad Spinner / Dryer 9/11 lbs. 14-3/4" x 14-3/4" x 15-3/4"

914.273.2222 / 800.327.ALFA (2532) www.alfaco.com Fax 914.273.3666 / 800.328.ALFA (2532)

47

Hand Meat saWs

AlfA # BlADe Size

6010-19 19" 6020-21 21" 6030-23 23" 6040-24 24" 6050-25 25" 6060-27 27"

Hand Meat saW

rePlaCeMent blades

AlfA # BlADe Size

HSB-19 19" HSB-21 21" HSB-23 23" HSB-24 24" HSB-25 25" HSB-26 26" HSB-27 27"

MEAT HAND SAWS

hAND MeAt SAWS

These sturdy hand saws are made in the USA. Great for any size butcher operation. All sizes have nickel-chrome plated frames with durable molded plastic handles and carbon steel blades.

hArDeNeD tooth BlADeS

Replacement Blades are 1/2" wide with 10 teeth per inch for smooth cuts.

MANUAL MEAT TENDERIZERS

!!

NEW

This Professional Meat Tenderizer is sturdy, small, portable and extremely simple to use. Allows the user to efﬁciently tenderize the toughest cuts of any animal product. Equipped with 48 razor sharp, Stainless Steel blades, facilitating maximum product penetration up to one inch deep. No assembly is required and this handy piece of kitchen equipment is dishwasher safe * for easy maintenance & cleaning (* Top Rack of Dishwasher is recommended). This product may be used on beef, pork, lamb, veal, venison, roasts, poultry, ﬁsh & vegetables.

Warranty: 6 months

Net/ShippiNg AlfA # DeScriptioN Weight DiMeNSioNS

ALFA HMT Manual Meat Tenderizer 1.1 lbs./3 lbs. 5-3/4" W x 1-5/16" D x 4-1/8" H

914.273.2222 / 800.327.ALFA (2532) www.alfaco.com Fax 914.273.3666 / 800.328.ALFA (2532)

48

DS6X3

ALFA

EXCLUSIVE

HAND TOOLS

PC4

1306-12

NEW DESIGN

066WRSS

Blade Only

066WSS

077BSS

2PHP

Flat Side Prevents Rolling

and Falling Off Flat Surface

335RD

FSH-S

335SQ

1PL

NEW!!

AlfA # DeScriptioN

PC4 Pizza Cutter, Stainless Steel Blade, 4 DS6X3 Dough Scraper, Stainless Steel, 3 1306-12

Roast Beef Tier and Fish Bait Stringer, S/S 12" Shaft, 1/4" Diameter, Closed Eye, improved Non-Slip

" Diameter, 5" White Poly Non-Slip Handle

" x 6" Blade, White Poly Handle

Plastic Handle with flat side to prevent rolling. Blister Packed FSH-S Fish Scaler, Stainless Steel, 5" Blade, Non-Clogging Design (12 per case) (China) 066WSS Metal Bone Dust Scraper (Round), Solid Aluminum Handle, 3-1/2

" diameter, Stainless Steel Blade 066WRSS Replacement Blade (Round), Stainless Steel for 066WSS above 077BSS Metal Bone Dust Scraper (Square), Solid Aluminum Handle, 3-1/2

" diameter, Stainless Steel Blade 335RD Polyethylene Bone Dust Scraper (Round), One Piece Construction, Molded Grip Handle 335SQ Polyethylene Bone Dust Scraper (Square), One Piece Construction, Molded Grip Handle 2PHP Polyethylene Meat Paddle / Ladle, 3-1/2 1PL Plastic Mallet, 3-1/2

914.273.2222 / 800.327.ALFA (2532) www.alfaco.com Fax 914.273.3666 / 800.328.ALFA (2532)

" x 6-1/2", Excellent for Steak and Fish, Wood Handle with Plastic Head

" x 6-1/2", for Scooping and Flattening Meat Patties

49

HAND TOOLS

0010

12-1/4”

PS1

562

Neoprene Insert only

561

23-1/2”

PS2L

0015

12”

KNF RACK SS

12”

17-1/4”

KNR

20-1/8”

AlfA # DeScriptioN

0010 Butcher Block Cleaning Brush, 7-3/4 0015 Butcher Block Cleaning Brush, 9-1/4 KNF RACK SS Stainless Steel, Holds 9 Knives, 1 Cleaver and 2 Steels - 12 561 Stainless Steel Cutlery Rack, 23-1/2" L x 12-1/4" W,

" x 2-5/8", Tempered Flat Steel in Hard Wood " x 3-3/4", Tempered Flat Steel in Hard Wood

" x 12" x 2-1/2"

includes Black Neoprene Insert for Knives and Steels 562 Replacement Neoprene Insert for #561 Rack KNR ABS Plastic Cutlery Rack, Holds 12 Knives, 1 Cleaver, 1 Round Steel (with Screws) MARK 12 Magnabar, 12 MARK 18 Magnabar, 18 MARK 24 Magnabar, 24 PS1 Plastic Knife Holster, Holds up to 8 PS2L Plastic Knife Holster, Holds up to 12

914.273.2222 / 800.327.ALFA (2532) www.alfaco.com Fax 914.273.3666 / 800.328.ALFA (2532)

50

52

" Heavy Duty Magnetic Bar on Wood Base, Holds Knives, Steels, Etc. (with Screws) " Heavy Duty Magnetic Bar on Wood Base, Holds Knives, Steels, Etc. (with Screws) " Heavy Duty Magnetic Bar on Wood Base, Holds Knives, Steels, Etc. (with Screws)

" Long Knives

MARK 12 MARK 18 MARK 24

WHIZARD SAFETY GLOVES

Take the danger out of repairing and cleaning slicers. Made of a unique combination of Stainless Steel encased in tough Aramid Fiber. These gloves are warm and comfortable to wear and are ambidextrous to fit either hand.

AlfA # Size cuff color

3021 Small (5,6,7) Yellow 3023 Medium (8,9) Blue 3025 Large (10,11) White 3068 X-Large (12,13) Orange

STAINLESS STEEL SAFETY GLOVES

Stainless Steel Mesh Glove

• New Ambidextrous Design ...

One Glove Fits Either Hand

• Welded Stainless Steel Rings

• Strong, Durable and Flexible

• Maximum Cut Protection

• USDA Accepted

AlfA # Size

515 S Small (5,6,7) 515 M Medium (8,9) 515 L Large (10,11) 515 XL X-Large (12,13)

• Easily Cleaned

• Adjustable Wristband Snap Fastener

S

hAND gAuge

Note: Place the left side of either hand against the far left hash mark and take the measurement across the palm at the knuckles.

M

L

XL

ULTRA LAMEX SAFETY APRONS

aProns

• Strong and Durable

• Maximum Protection

• Lightweight and Flexible

• UL Listed and USDA Accepted

• Made in France

• Easily Cleaned

• Available in 3 Sizes

• Come complete with Adjustable

Nylon Straps and Full Instructions

• Made of Aluminum Discs joined

by Welded Stainless Steel Rings

AlfA # Size type

UL22X22 22" x 22" Without Slit UL27X22 27 UL30X22 30

" x 22" Without Slit " x 22" Without Slit

rePlaCeMent Parts

AlfA # DeScriptioN

1-NEW RINGS Apron Ring - Pkg./100 2-NEW DISCS Apron Disc - Pkg./100 4-CLIPS Apron Clip - Each

914.273.2222 / 800.327.ALFA (2532) www.alfaco.com Fax 914.273.3666 / 800.328.ALFA (2532)

51

!!

PORTABLE GAS STOVE

NEW

ButANe fuel

Extreme High Heat 10,000 BTU’s!

• 8 Oz. can

• Burns for 2-4 hours

• UL listed

• Cannot ship via air

WINE BOTTLE RACK

high heAt ButANe StoVe

Extreme High Heat 10,000 BTU’s!

• Solid brass burner

• High heat output of 10,000 BTU’s

• High impact protective carrying case

• Automatic Piezo Electronic Ignition System

• Pressure sensor safety top

• Adjustable heat range, from boil to simmer

• CSA Certified

AlfA # DeScriptioN pAckiNg

P STOVE High Performance Butane Stove 1 B FUEL Butane Fuel, 8 Oz. Can 1

AlfA # DeScriptioN Box DiMeNSioNS Weight

WR6-02 6 Bottle Wine Rack 11-1/2

• Expandable - 24 Chrome Spokes with 7

black ABS Connectors

• Packaging: Comes in a 4 Color Gift Box

CHROME ICE CRUSHER

AlfA # DeScriptioN Box DiMeNSioNS Weight

ICR-C Chrome Ice Crusher 6

• Round ABS plastic with chrome finish

• Transparent top and ice container with scoop

• Blades are Stainless Steel

• Packaging: Comes in a 4 Color Gift Box

" x 6" x 2" 1-1/3 lbs.

" x 6" x 10-1/2" 2-1/3 lbs.

914.273.2222 / 800.327.ALFA (2532) www.alfaco.com Fax 914.273.3666 / 800.328.ALFA (2532)

52

SLICER KNIVES

EXCLUSIVE

+

B

G

ONLY G&B

BLADES ARE

MADE IN

GERMANY

Precision crafted G&B Knives are made in Germany from the finest steel and heat treated by a patented computer controlled flame hardening process. The result of this engineering is the longest wearing knife that has become the quality standard for original equipment manufacturers and service professionals throughout the world.

150G HC

285 SS

963-C Shrink Wrapped

808 SS

1612 SS

AlfA # gloBe # fitS gloBe MoDelS DiAMeter MouNtiNg holeS

" 3 " 3

" 12 " 12

" 6 " 6 " 6

" 3

" 3 " 3 " 3 " 3

NEW!! NEW!!

NEW!! NEW!! NEW!!

1021-C 1021 3600, 3850, 3975, 4600, 4850, and 4975 11-1/2 1022-S 1022 3600, 3850, 3975, 4600, 4850, and 4975 11-1/2 150G HC 510 75,150, 260, 510, 610, 660, 710, 760, 810 (Ring) 11-7/16 150G SS 510SS 75,150, 260, 510, 610, 660, 710, 760, 810 (Ring) 11-7/16

285 HC 746-BP

825, 850LR, 875, 875RL, 2500, 2700, 2750, 2850, 2875, 3500, 3750, 3875V, 4500, 4750, 4875 and All “L” and “SL” Models

285, 300, 400, 500, 685, 715, 720, 725, 765, 770, 775, 815, 820,

11-1/2"" 6 285 SS 746 SS-BP Same as above 11-1/2 963-C 963-HC Same as above (Hollow Ground Style) 11-1/2 963-SS 963-S Same as above (Hollow Ground Style) 11-1/2 CM9 HC 56 CHEFMATE GC9 9 CM10 HC 57 CHEFMATE GC10 10 CM12 HC 58 CHEFMATE GC12 and GS12D 12 3600P HC 4600026 3600P and other “P” Series Slicers 13 3600P SS 4600027 Same as above 13

ISO 9002

CERTIFIED

ALFA

NEW!!

AlfA # Berkel # fitS Berkel MoDelS DiAMeter MouNtiNg holeS

800 SS 3633-5024 3340, 3350 12-1/2

" 3 808 HC 3675-00074 807, 817, 808, 818, 909, 909C, 909CI, 909ES, 909FA, 919FS, 919, 2340, 2350 12-1/2 808 SS 3675-00070 Same as above 12-1/2 6509 HC 823-00073 823, 823A, 823E, 4510 (Made in Italy) 9 8510 HC 825-00073 825, 825A, 825E (Made in Italy) 10 G12 HC 827-00073 827, 827A (Made in Italy) G12 SS N/A 827, 827A (Made in Italy)

– Not for Model 827E – see below – Not for Model 827E – see below

12" 4

12" 4 827E HC 827E-00073 827E 12 834 SS 3501-09447 829, 834, 834EP, EPB, EPBS, S, VS, BERKELETTE 11-5/8 180 SSN 3675-00158 910, 915, 115, 180, 180D, E, F, FA, GS (Stacker)

14-1/2" 3

X13 SS 3675-00277 All X13 Models 13

" 0 " 0

" 3

" 4

" 0

AlfA # hoBArt # fitS hoBArt MoDelS DiAMeter MouNtiNg holeS

0512 SS 439870-2 512, 512BMS 11-3/4 8510 HC 292499 610 (Made in Italy) 10 1612 HC N/A 1612 SS 439879-1 28/1612 SS N/A

Note: Alfa strongly recommends that slicer blades be installed by qualified service technicians only.

1612, 1612E, 1612EC, 1712, 1712E, 1712EC, 1712R, 1812, 1912 11-3/4" 0 1612, 1612E, 1612EC, 1712, 1712E, 1712EC, 1712R, 1812, 1912 Same as above plus 2612, 2712, and all Series 2000

C and HC = Hard Chrome Finish S and SS = Stainless Steel

11-7/8" 0

11-3/4" 0

" 3

The above parts are sold by Alfa International as replacement parts for Hobart, Berkel and Globe Slicers. Alfa is not affiliated with these firms

914.273.2222 / 800.327.ALFA (2532) www.alfaco.com Fax 914.273.3666 / 800.328.ALFA (2532)

53

SLICER KNIVES

ALFA

+

B

EXCLUSIVE

G

ONLY G&B

BLADES ARE

MADE IN

GERMANY

MouNtiNg

#

BizerBA # fitS BizerBA (Biro) MoDelS DiAMeter holeS

AlfA

G12 HC G12 SS G13 HC Newer Models SE8, SE12, SG8D, VS8, VS8D, VS8F, VS8A, VS12 13 G13 SS SE8 SS

MouNtiNg AlfA

6509 HC 070150 6509 (Intedge UL-9) 9" 3 7510U HC 75100009 7510 (Omas TN250) 10 7512 HC 75120009 7512 (Old Style) 12 8510 HC 070128 8510 (Intedge UL-10), 4510 10 G12 HC 8512228HC 6512, 8512, 9512 11-3/4 G12 SS 8512228 6512, 8512, 9512 11-3/4

40110000016 40110000045 60530101500

40310000021 40220007200 Pre-1994 SE8, SE8L, SG8D, VS8, VS8D, VS8F 13" 3

#

uNiVex # fitS uNiVex AND iNteDge MoDelS DiAMeter holeS

G12, SE255, A301, GSG-12, GSG12A, 300B 11-3/4" 4 G12, SE255, A301, GSG-12, GSG12A, 300B 11-3/4" 4 G13, SE355, SE12, SE128, A330FB, A330, A400, A404 & 1994 and

Same as above 13" 4

6509 HC G13 HC

ISO 9002

CERTIFIED

"

" 3 " 3 " 3

" 4 " 4

AlfA # fitS fleetWooD MoDelS (itAly) DiAMeter MouNtiNg holeS

6509 HC 220AS 9 8510 HC 250AS, 265 10 G12 HC 312, 412, 1312, 1412, BF300, 312E, A300 11-3/4 G12 SS 312, 412, 1312, 1412, BF300, 312E, A300 12

AlfA # fitS geNerAl MoDelS (reNiNghAuS) DiAMeter MouNtiNg holeS

6509 HC SM-9B 9 8510 HC SM-10A 10

HC and C = Carbon Steel with Hard Chrome Finish. SS and S = Stainless Steel - Rust Resistant.

A blade with a Hard Chrome finish will be easier to sharpen and stay sharper longer, but may rust. A Stainless Steel blade will not rust.

SST blades are the most popular on Hobart and Berkel slicers, while most Globe slicers use Hard Chrome blades.

Installation of a new blade may require changing bearings, shims and any other worn components to avoid blade wobble.

Note: Alfa strongly recommends that slicer blades be installed by qualified service technicians only.

The above parts are sold by Alfa International as replacement parts for Univex, Intedge, Bizerba, Fleetwood and General Slicers.

Alfa is not affiliated with these firms.

" 3

" 4

" 3

SLICER KNIFE SAFETY COVER

Magnets

effectiVe

The most common Slicer injury occurs when the Knife is exposed for service or cleaning. Using a Safety Cover whenever the Knife is exposed will help prevent loss of time and money due to injury.

SiMple

Molded in lightweight, durable yellow polystyrene plastic, these covers attach in seconds with built-in magnets. They are dishwasher safe and easily stored.

AlfA # fitS kNife Size

SC1 10 SC2 12-1/2 SC3 11" and 12

"

54

914.273.2222 / 800.327.ALFA (2532) www.alfaco.com Fax 914.273.3666 / 800.328.ALFA (2532)

SLICER KNIFE / SHARPENING STONES

NEW!!

ALFA

EXCLUSIVE

ISO 9001

CERTIFIED

High quality Alfa Sharpening and Truing Stones are manufactured by skilled craftsmen in Germany. These Stones are used as original equipment by many slicer manufacturers and will last longer and stay cleaner than other brands.

AlfA # gloBe # fitS gloBe MoDelS

UN-50 S 5 GC9, GC10 GC9 T 7 GC9, GC10 GC12 S 6 GC12 GC12 T 8 GC12 075 SG 214A 75, 150, 260, 285, 300, 400, 500, 500L, 610, 660, 685, 710, 715, 720, 725, 725L, 760, 765, 770, 775, 775L, 810, 815, 820, 825, 850LR, 875, 875RL, 2500, 2700, 3500, 3600, 3750, 3850, 3875V, 3975, 4500, 4600, 4750, 4850, 4875, 4975 and All “L” Models 075 SW 214-1 Same as above 075 T 213 Same as above 110 T* C-808 110, 115, 210, 215

AlfA # Berkel # fitS Berkel MoDelS

805 S* 04748-3 G, GA, GR, GT, GRX, GT, 805, 806 808 SG 3675-00076 807, 817, 808, 818, 909, 919, 834, 2340, 2350 808 SW 3675-00076W Same as above 808 T 3675-00075 Same as above 825 S 825-00112 823, 825, 827 Sharpening and Truing Stone are the same 825 T 825-00112 Same as above 180 SG B9-00612 115, 180, 910, 915, D, E, F, FA, GS 180 SW B9-00612SW Same as above 180 T B9-0600 Same as above 180 TN 3675-00157 180 (New Style), 910, 915, D, E, F, FA, GS 170 T 3675-00084 Same as above and Model HD

AlfA # hoBArt # fitS hoBArt MoDelS

1612 SG M-73851 111, 210, 211, 311, 411, 512, 512TMS, 1512, 1612, 1712, 1712R 1612 SW M-73851 Same as above 1612 T M-13201 512, 512TMS, 1512, 1612, 1712, 1712R H-747 478747 Truing Stone for 2612, 2712, 2812, 2912 Models H-882 119882 Holder and Truing Stone Assy. for 1812 and 1912 Models

*Note: Available while current stock lasts.

AlfA # fitS BizerBA MoDelS

G12 S G12, G13, SE255, SE355, A330, SE8, SE12 G12 SW Same as above G12 T G12, SE225 G13 T G13, SE355, A330, SE8

AlfA # fitS uNiVex MoDelS

UN-50 S 6509, 7510, 7512, 8512, 9512 UN-50 T Same as above

AlfA # fitS lAN elec (uk) MoDelS

075 SG Same as above (For Alfa L-4 Assembly)

AlfA # fitS fleetWooD MoDelS

312 S BF300, 312, 312E, 412E 180 T Same as above

S = Sharpening or Grinding (for outside or back of Blade) T = Truing or Honing (for front or inside of Blade) SG = Gray Sharpening Stone (For hard Chrome Blades) SW = White Sharpening Stone (For Stainless Steel Blades)

Packing: 25 Stones per Sleeve

SERVICE TIPS: Proper Knife sharpening is

critical to Slicer performance and should be done sparingly. Apply each stone for just a few seconds to restore a fine edge. Over-sharpening will burn the blade and the edge will be lost. Both Stones should be changed when a new blade is installed.

The above parts are sold by Alfa International as replacement parts for Hobart, Berkel, Globe, Univex and other Slicers. Alfa is not affiliated with these firms.

H-747

H-882

ALFA

EXCLUSIVE

Stainless Steel

IMPROVED

Crepe Rubber

STONE CLEANING TOOL

The Stone Saver removes grease and glaze from Slicer Stones in seconds. This simple hand held Cleaning Tool will restore the surface of any Grinding Stone to improve performance and extend usable life. The Stainless Steel bristles remove heavy accumulation, while the honey crepe rubber takes away finer residues.

AlfA # DeScriptioN

Wood Handle

914.273.2222 / 800.327.ALFA (2532) www.alfaco.com Fax 914.273.3666 / 800.328.ALFA (2532)

STONE-CT Stone Cleaning Brush

55

FOOD MACHINE LUBRICANTS

Recommended for all Food Machines and Equipment.

WHEN ONLY THE

BEST WILL DO

Super luBe® oil

Super Lube® Oil, with PTFE, is a premium water proof synthetic oil with suspended PTFE particles that bond to surfaces adding lubricity to moving parts. The Super Lube® Oiler is ideal for the precise lubrication of parts and may be used as a general purpose lubricant for industrial machinery & equipment.

AlfA # oil DeScriptioN pAckiNg

LO-51010 1/4 Oz. Precision Oiler 1 LO-51013 1/4 Oz. Precision Oiler, Display Box of 48 pcs. 1 LO-2 4 Oz. Plastic Bottle 6 LO-QT 32 Oz. Plastic Bottle 6 LO-GAL 1 Gallon Plastic Bottle 4 LO-SC 11 Oz. Spray Can

Grease is opaque white & oil is colorless. Both withstand high temperatures while maintaining high viscosity and water resistance. Each is oxidation stable and USDA approved.

(Shipped via ground only) 12

Super luBe® greASe

Super Lube® Grease is a synthetic NLGI grade 2, heavy duty, multi-purpose lubricant compatible to most lubricants. Super Lube® Grease outlasts conventional greases by 50-100% and has excellent adhesion. It is listed as a USDA food grade lubricant, rated H1 for incidental food contact. Operating over a broad temperature range (-45° F to +450° F), it will not run, drip, dry out, melt or separate and does not evaporate or form gummy deposits.

AlfA # greASe DeScriptioN pAckiNg

LG-21010 1/2 Oz. Tube 1 LG-21013 1/2 Oz. Tube in Display Box of 48 pcs. 1 LG-03 3 Oz. Cartridge 12 LG-14 14 Oz. Cartridge 12

Note: All items on this page except LO-634G are approved as Kosher.

914.273.2222 / 800.327.ALFA (2532) www.alfaco.com Fax 914.273.3666 / 800.328.ALFA (2532)

56

!!

FOOD MACHINE LUBRICANTS

NEW

luBri-filM pluS

Extended Wear Lubricating Grease, 1 oz. and 4 oz. Tubes

Haynes Lubri-Film Plus is a heavy duty sanitary lubricant with extended

performance & low friction properties. This lubricant is NSF approved & rated H1 for use in food processing plants for incidental food contact. All ingredients are FDA approved.

Haynes Lubri-Film Plus is designed for longer lubrication intervals, eliminating downtime to relubricate equipment. This lubricant wears evenly on all moving parts, preventing metal to metal equipment damage. The Haynes Lubri-Film Plus will not dry or gum on equipment and is highly resistant to separation or bleed. It is a time saver because it cleans off equipment easily.

rated H1 NLGI: 1 Color: None Odor: None

AlfA # greASe DeScriptioN pAckiNg

Texture: Smooth

LG-01 1 Oz. Tube 1 LG-04 4 Oz. Tube 1

Common Applications

• Pumps

• Meat Slicing Equipment

• Cheese Processing Equipment

• Dispensing Units

• Bearings

• Packings

• Valves

• Mixers

• Vegetable Slicers

• Batch Freezers

• Soft Serve Machines

• Shake Machines

• Frozen Drink Machines

• Cappuccino Machines

• Yogurt Machines

• Pasta Machines

• Dispensing Units

•. Beverage Equipment

• Hospital Beds

hAyNeS SprAy

U.S.P.* Light Duty Sanitary Oil (9 oz. Aerosol Spray Can)

Haynes Spray is a light duty sanitary oil lubricant for all sanitary machine parts.

This lubricant is NSF approved (rated H1) for use in food processing plants for incidental food contact. All ingredients are FDA approved.

Haynes Spray. The U.S.P.* Light Duty Sanitary Spray can be used as an oil lubricant for food processing equipment. This sanitary oil can be used safely on drawer slides, doors, hinges, wheels, carts, or anywhere a light duty oil is needed in and around the food processing area. Haynes Spray contains no animal or vegetable fats and is absolutely neutral. It will not turn rancid, contaminate or taint food products. It is odorless, tasteless, colorless and non-toxic.

Meets United States Pharmaceutical Standards

*

rated H1

AlfA # oil DeScriptioN pAckiNg

LO-HS 9 Oz. Spray Can 1 (Shipped via ground only)

Common Applications

• Sanitary valve stems

• Homogenizer Pistons & Rings

• Positive Pump Parts

• Wheels

• Hinges

• Internal Machinery Parts

• Anti-Rust Film

• Filling Machines

• Gates

(carts, chairs, equipment)

(doors, windows, equipment)

914.273.2222 / 800.327.ALFA (2532) www.alfaco.com Fax 914.273.3666 / 800.328.ALFA (2532)

57

PARTS FOR HOBART MIXERS

Models A120, A200, D300 and H600 Series

HM2-326

HM2-821

HM2-160

HM2-431 HM3-229

f

itS MoDelS

Attachment Hub

HM2-971

(1")

AlfA # hoBArt# DeScriptioN A120 A200 D300 h600

HM2-160 00-013160 Yoke Shifter x x x HM2-326 289326 Trans Case Cap Trim x HM2-431 875567 Toggle Switch x x HM3-229 87711-229 Toggle Switch x HM2-821 291821 Switch Kit with On/Off w/Switch and New Plate x x HM2-971 108197-1

The above parts are sold by Alfa International as replacement parts for Hobart Mixers. Alfa is not affiliated with Hobart.

Thumb Screw Assembly (1" Shaft)

x x x x

Mixer aGitator aPPlicationS

ATTACHMENT APPLICATION FOOD PRODUCTS RECOMMENDED SPEEDS

“B” Style Flat Beater

• Multi purpose agitator

• Mashing potatoes

• Mixing cakes

• Icings

• Use 1st speed for starting

• Medium speed for finishing

“D” Style Wire Whip

“E” Style J Dough Hook

“ED” Style Spiral

Dough Hook

“P” Style Pastry Knife

• Maximum blending of air into light products

• Mixing

• Folding

• Stretching dough in 5-40 qt. mixers

• Mixing

• Folding

• Stretching dough in 20-140 qt. mixers

• Cutting action for combining ingredients

• Whipping cream

• Beating egg whites

• Breads

• Pizza Dough

• Breads

• Pizza Dough

• Pastry dough

• Pie dough

• 2nd & 3rd speeds for 3 speed mixers

• 3rd & 4th speeds for 4 speed mixers

• 1st & 2nd speeds for 2 & 3 speed mixers

• 1st, 2nd & 3rd speeds for 4 speed mixers

• 1st & 2nd speeds for 2 & 3 speed mixers

• 1st, 2nd & 3rd speeds for 4 speed mixers

• For stirring use low speeds

• For cutting use medium speeds

914.273.2222 / 800.327.ALFA (2532) www.alfaco.com Fax 914.273.3666 / 800.328.ALFA (2532)

58

PARTS FOR HOBART MIXERS

Models A120 and A200

HM2-750

O/S

HM2-551

Assembly

Agitator Components

HM2-318

Planetary Unit

HM2-621

fitS MoDelS

HM2-229

HM2-813 HM2-206

HM2-145

HM2-702

Key Only

HM2-126

HM2-059

HM2-126

HM2-006 HM2-318 HM2-078 HM2-734

HM2-946 HM2-241 HM2-282 HM2-153

Transmission Unit

HM2-018 /019/020

HM2-695

AlfA # hoBArt# DeScriptioN (o/S = olD Style N/S = NeW Style) A120 A200

HM2-006 BB-20-6 Planetary Bearing x HM2-018 WS-010-18 Bearing Shim Washer (.002 HM2-019 WS-010-19 Bearing Shim Washer (.003 HM2-020 WS-010-20 Bearing Shim Washer (.010

") x x ") x x

") x x HM2-059 12430-59 Upper Clutch Sleeve Key x x HM2-078 67500-78 “O” Ring (Pkg./5) x HM2-126 12695 Bronze Clutch Gear Bearing x x HM2-145 107145 Planetary Shaft Spacer x x HM2-153 24715-3 Acorn Nut 1/2

"-20 x x HM2-206 BB-20-18 Ball Bearing x x HM2-229 NS-32-29 Stop Nut 1/2

"-20 Flex Lock x x HM2-241 WS-24-1 Retaining Washer (Pkg./10) x HM2-282 10928-2 Special Nut x x HM2-318 12430-17 Key (Lower) x x HM2-418 RR-004-18 Retaining Ring x x HM2-482 23482 Oil Seal x HM2-551 24551 Assembly - Planetary Shaft (Includes HM2-750 plus Diving Key Control, Arm, Spring, Rivet and Special Feather Key) O/S x HM2-621 65062-1 Agitator Shaft Pin x HM2-695 114695 Oil Seal x x HM2-702 109070-2 Key (Middle) x x HM2-712 BB-17-12 Bearing x HM2-734 124734 Shaft - Planetary (N/S) with 2 Keys x x HM2-750 12750 Shaft - Planetary (O/S with Grooves) x HM2-813 WS-008-13 Plain Washer (Pkg./10) x x HM2-936 113936 Sub-Assembly - Agitator Shaft x HM2-946 124946 Fiber Washer (Pkg./10) x x

The above parts are sold by Alfa International as replacement parts for Hobart Mixers. Alfa is not affiliated with Hobart.

HM2-418

HM2-059 Key Only

HM2-712

HM2-006

HM2-482

HM2-936

914.273.2222 / 800.327.ALFA (2532) www.alfaco.com Fax 914.273.3666 / 800.328.ALFA (2532)

59

PARTS FOR HOBART MIXERS

Transmission Gear Unit – Models A120 and A200

Transmission Gear Unit

HM2-615 Shaft Service Kit

HM2-710

HM2-636

HM2-052

HM2-236

HM2-297

HM2-697

HM2-297

HM2-418

HM2-051

HM2-028

HM2-710

HM2-636

HM2-748

HM2-304

HM2-513

HM2-128

HM2-051

HM2-028

HM2-052

HM2-745

HM2-651

HM2-747

HM2-223

Motor Gear

HM2-575

HM2-754

HM2-757

fitS MoDel SerieS

AlfA # hoBArt# DeScriptioN A 120 A 200

HM2-028 SL-002-08 Loading Spring (package of 10) x x HM2-051 BB-005-01 Ball Bearing x x HM2-052 BB-005-02 Ball Bearing (Not included in HM2-615 Kit) x x HM2-223 NS-032-23 Lock Nut for Motor Gear Worm x x HM2-236 291236 Steel Transmission Shaft (15T) x x HM2-297 435297 Transmission Shaft Gear Key x HM2-418 RR-4-18 Retaining Ring x x HM2-575 291221 Steel Worm Gear (5T) (60 HZ) for Motor 437575 x x HM2-651 124765-1 Spacer 3/4

"- Worm Wheel Shaft (Not included in HM2-615 Kit) x x HM2-697 12697 Lower Spacer (1-1/2

") x x HM2-747 12747 Worm Key x HM2-754 12754 Motor Gear Washer x x HM2-757 12757 Motor Shock Absorber Spring x x HM2-615 293615 Worm Wheel Shaft Service Kit: Includes all parts listed below* x x HM2-128 291128 Worm Wheel Shaft x x HM2-304 12430-4 Key x x HM2-513 124751 Bronze Worm Wheel Gear and Bushing (60 HZ) x x HM2-636 WS-006-36 Retaining Washer (Pkg./10) (1 in Kit) x x HM2-710 12710 Retaining Nut (2 in Kit) x x HM2-745 124745 Worm Wheel Shaft Washer (Not included in HM2-615 Kit) x x HM2-748 124748 Steel Gear (15T) x

*Note: HM2-615 Kit includes 1 ea. HM2-636 Retaining Washer. HM2-636 package of 10 available separately.

The above parts are sold by Alfa International as replacement parts for Hobart Mixers. Alfa is not affiliated with Hobart.

914.273.2222 / 800.327.ALFA (2532) www.alfaco.com Fax 914.273.3666 / 800.328.ALFA (2532)

60

HM3-046

PARTS FOR HOBART MIXERS

PLANETARY and ATTACHMENT HUB UNIT

Model D300

HM3-142

HM3-206

HM3-158

HM3-736

HM3-335

HM3-019

HM3-339

with HM3-019 Pin

At t A c h m e n t hu b

HM2-971 (1")

HM3-212

ALFA # hObARt # DeScRIPtIOn (AL L FO R mO D e L D300)

HM2-971 108197-1 Thumb Screw Assembly (1" Shaft) - Also Fits A120, A200, H600 Models HM3-019 70019 Agitator Pin HM3-046 RR-4-6 Upper Agitator Shaft Retaining Ring HM3-142 12430-142 Agitator Shaft Pinion Key HM3-158 12430-158 Lower Planetary Key HM3-206 BB-20-6 Top Agitator Shaft Bearing HM3-212 BN-2-12 Hub Nose Attachment Needle Bearing HM3-335 110335 Agitator Shaft Seal HM3-339 70339 Planetary Agitator Shaft Assembly (includes HM3-019 Pin) HM3-736 BB-17-36 Bottom Agitator Shaft Bearing

The above parts are sold by Alfa International as replacement parts for Hobart Mixers. Alfa is not affiliated with Hobart.

914.273.2222 / 800.327.ALFA (2532)

www.alfaco.com Fax 914.273.3666 / 800.328.ALFA (2532)

61

PARTS FOR HOBART MIXERS

TRANSMISSION UNIT

Model D300

HM3-232

HM3-941

HM3-026

HM3-174

HM3-526

HM3-653

HM3-034

HM3-049

HM3-130

HM3-174

HM3-166

HM3-331 Assembly

HM3-179

HM3-818

HM3-830

HM3-260

HM3-022

HM3-161

HM3-055

HM3-833

HM3-187

HM3-334

ALFA # HOBART # DESCRIPTION

HM3-022 BN-2-2 Transmission Shaft Needle Bearing HM3-026 70026 Pusher Bearing HM3-034 70034 Bronze Gear Worm (29T / 60HZ) HM3-049 12430-49 Worm Gear Shaft Key HM3-055 12430-55 Middle Planetary Shaft Key HM3-130 291130 Worm Gear Shaft HM3-161 12430-161 Upper Planetary Shaft Key HM3-166 70166 Worm Shaft Spring Washer HM3-174 BB-17-4 Transmission Drive Shaft Bearing HM3-179 BB-17-9 Upper Transmission Shaft Bearing HM3-187 71187 Planetary Shaft and Bushing Assembly HM3-232 NS-32-32 Stop Nut - Transmission LH Thread. “Flexloc” HM3-260 70260 Lower Transmission Shaft Key HM3-331 270533-1 Worm Gear Shaft and Bearing Assembly (60HZ), includes HM3-174 (2), HM3-653, HM3-526, HM3-130, HM3-049, HM3-034 and HM3-166 HM3-334 110334 Planetary Shaft Seal HM3-526 270526 Worm Gear Shaft Step Spacer HM3-653 124765-3 Long-Worm Gear Shaft Gear Spacer HM3-818 89818 Transmission Shaft HM3-830 89830 Upper Transmission Shaft Key HM3-833 BB-8-33 Lower Planetary Bearing HM3-941 BB-9-41 Upper Planetary Bearing with Groove and Snap Ring

The above parts are sold by Alfa International as replacement parts for Hobart Mixers. Alfa is not affiliated with Hobart.

914.273.2222 / 800.327.ALFA (2532) www.alfaco.com Fax 914.273.3666 / 800.328.ALFA (2532)

62

PARTS FOR HOBART MIXERS

PLANETARY UNITS

Models H600, L800, M802 and V1401

HM6-058

HM6-270

HM6-021

HM6-651

HM6-156

H600 / l800

HM6-692

HM6-636

HM6-739

HM6-137

HM6-744

M802 / V1401

Pl a n e t a r y

HM6-058

HM6-021

HM6-651

HM8-749

HM8-288

HM8-424 HM6-636

HM6-739

HM8-717

HM6-744

HM6-723

Alfa # Hobart# Description H600 L800 M802 V1401 HM6-021 67500-21 Agitator Shaft “O” Ring x x x x

HM6-058 RR-5-8 Agitator Shaft Retaining Ring x x x HM6-137 64137 Complete Planetary Agitator Shaft Assembly x x HM6-156 111156 Planetary Agitator Shaft Pin x x HM6-270 24270 Internal Steel Pinion x x HM6-636 BB-6-36 Upper Agitator Bearing x x x HM6-692 437692 Internal Gear (59T) x x HM6-651 24651 Planetary Seal x x x HM6-723 64723 Agitator Shaft Plug Screw x x x x HM6-739 BB-7-39 Lower Agitator Bearing x x x HM6-741 SC-47-41 Set Screw x x x x HM6-744 7744 Cone Point Set Screw x x x x HM8-288 74288 Internal Pinion Key x x x HM8-424 RR-4-24 Retaining Ring x x HM8-717 65717 Planetary Agitator Pin x HM8-749 65749 Agitator Shaft Assembly includes

HM6-723, HM6-741, HM6-744 and HM8-717 x

The above parts are sold by Alfa International as replacement parts for Hobart Mixers. Alfa is not affiliated with Hobart.

HM6-741

HM6-723

HM6-741

Fi t s Mo d e l s

914.273.2222 / 800.327.ALFA (2532)

www.alfaco.com Fax 914.273.3666 / 800.328.ALFA (2532)

63

PARTS FOR HOBART MIXERS

Models H600, P660, L800, M802 and V1401

HM6-347

HM6-948

HM6-127

HM2-322

HM6-219

HM6-222

HM6-019

HM6-526

HM6-195

fi t s Mo D e l s

Transmission Unit

H

p 6 0 0

l

6

8

6

0

HM6-826

HM2-181 (13")

HM2-811 (10-1/4")

HM6-731

HM8-318

HM14-317

HM2-972 (1-1/2")

HM2-198

HM8-107

HM14-043

HM6-022

Al f A # Ho b A r t# De s c r i p t i o n

HM2-181 78182 Handwheel and Handle Assembly x HM2-198 24198 Nut-Bowl Lift Screw - Brass x x x HM2-322 68322 Nut-Bowl Lift - Brass x x HM2-811 78181 Handwheel and Handle Assembly x x HM2-972 108197-2 Thumb Screw 1-1/2" (#22 Hub) x x x HM6-019 67500-19 “O” Ring-Bevel Gear x x HM6-022 110222-2 Mixer Base - New Style for Older Machines x x x HM6-102 67500-102 Chimney “O” Ring x x HM6-127 WL-12-7 Planetary Shaft Lock Washer x x HM6-195 12430-195 HM6-210 12430-210 HM6-211 12430-211

Lower Planetary Key Upper Planetary Key Planetary Shaft Key

x x x x x x

HM6-219 65922-19 Mixer Bowl Clamp x x x x HM6-222 24222 HM6-347 NS-34-7

Planetary Shaft Planetary Shaft

HM6-526 BB-15-26 Lower

Planetary

x x

Lock Nut

x x

Bearing x x HM6-731 117873-1 Shifter Plate x x HM6-826 291826 Switch (On/Off Switch + Plate) x x x HM6-948 BB-9-48

Upper Planetary Bearing

x x HM8-107 065107 Gear Belt Flex x HM8-318 BV-13-18 Power Bowl Lift Unit Belt x HM14-043 068043 Gear Belt Flex x HM14-317 BV-13-17 Power Bowl Lift Unit Belt x

HM6-210

HM6-211

HM6-102

M

8 0 2

V 1 4 0 1

The above parts are sold by Alfa International as replacement parts for Hobart Mixers. Alfa is not affiliated with Hobart.

914.273.2222 / 800.327.ALFA (2532) www.alfaco.com Fax 914.273.3666 / 800.328.ALFA (2532)

64

B-139

PARTS FOR BERKEL SLICERS

B-032

B-098

B-095

B-013

B-063

808 SS / HC

AlfA # Berkel# DeScriptioN

B-012/808

B-120

B-072 B-781

B-113

Pkg./12

B-114

fitS MoDelS

B-028

8 0 7

–

8 1 7

8 0 8

–

8 1 8

B-008

9 0 9

–

9 1 9

B-031

B-009

2 3 4 0

808 HC 3675-00074 Hard Chrome Blade (Made in Germany) x x x 808 SS 3675-00070 Stainless Steel Blade (Made in Germany) x x x x x

B-008 3875-00029 Bakelite Knife Scraper x B-009 3375-00314 Knife Center Bolt (Old Style) x B-012/808 4575-00289 Center Plate Mounting Bracket (New Style) x x B-013 3375-00310 Center Plate Knob for B-012/808 x x B-028 4575-00281 Knife Scraper Holder (Metal) x x x B-031 3875-00057 Knife Scraper (Plastic) x x B-032 2275-00221 Knife Scraper Knob x x B-063 4722-3A Knife Bolt Fiber Plug Set x B-072 3375-00314 Knife Bolt (Old Style) x B-095 2275-00064 Center Plate Snap Ring x x x B-098 2175-00239 Knife Scraper Bolt x x B-113 3275-00040 Knife Hub Shims (Pkg./12, Metal) x x B-114 3875-00024 Center Plate Spacer Plug (New Style) x x B-120 3375-00107

Knife Washer and Screw Assembly (New Style)

x x B-139 2375-00139 Plunger for Center Plate x B-781 3475-00781 Knife Washer, Stainless Steel x x

2 3 5 0

Note: See page 55 for Knife Sharpening Stones.

The above parts are sold by Alfa International as replacement parts for Berkel Slicers. Alfa is not affiliated with Berkel.

914.273.2222 / 800.327.ALFA (2532) www.alfaco.com Fax 914.273.3666 / 800.328.ALFA (2532)

65

B-030, B-030 SS

PARTS FOR BERKEL SLICERS

B-054

B-096 B-029 B-025

B-581

B-051 B-056 B-023

8

9

0

8

9

–

8

9

1

8

9

fitS MoDelS

0 7

–

8 1 7

2

2 3 4 0

3

5

4

0

B-037

B-040

B-035

B-502

B-026

AlfA # Berkel# DeScriptioN

B-132

B-024

B-023 2275-00042 Meat Table Knob, Female (Round)-Black x x x x x B-024 2275-00043 Meat Pusher Knob, Male (Round)-Black x x x x x x x B-025 2275-00056 Meat Pusher Rod Knob-Black x B-026 2275-00063

Meat Table Support Knob (Star Shaped)-Black

x x x x x B-029 3375-00242 Meat Pusher Rod-Stainless Steel x x x x B-030 4675-00313 Meat Pusher Assembly complete with 2 Prongs (Chrome) x x x B-030 SS 4675-00662 Meat Pusher Assembly complete with 1 Prong (Stainless) x x x B-035 3275-00043 Meat Pusher Hook Kit complete with Prongs x x x B-037 3375-00244 Meat Pusher Knob Spacer x x x x x B-040 3875-00023 Meat Pusher Bumper x x x x x B-051 2175-03277 Meat Table Bolt x x x B-054 3875-00022 Meat Table Shaft Lock Pin x x x B-056 3375-00243 Meat Table Knob Spacer x x x x x B-096 3275-00029 Pusher Shaft Compression Spring x x x x x B-132 2275-00045 Meat Pusher Bushing x x x x x B-502 4675-00962 Meat Table Mounting Bracket x x B-581 4575-00847 Meat Table x x

3 3 5 0

The above parts are sold by Alfa International as replacement parts for Berkel Slicers. Alfa is not affiliated with Berkel.

914.273.2222 / 800.327.ALFA (2532) www.alfaco.com Fax 914.273.3666 / 800.328.ALFA (2532)

66

PARTS FOR BERKEL SLICERS

B-036

B-192

B-130

B-125

B-129

B-043

B-208

B-059

B-022

B-795 B-765

B-097

B-055

B-099

B-027

B-147

B-141B-1099

8

B-126

fitS MoDelS

AlfA # Berkel# DeScriptioN

8

0

7

8

–

8

1

7

8

9 0 9

2

–

3

9

4

1

0

9

2

3

5

4

0

B-022 3675-00061 Rubber Support Shoe x x x x x x B-027 3375-00293 Center Plate Stud - Stainless Steel x x x B-036 4375-00114 Knife Pulley Assembly (New Style) x B-043 3875-00025 Knife Box Cover Seal x x x x x B-055 3275-00030 Center Plate Stud Shim Set (Pkg./12, Metal) x x B-059 3275-00059 Foot Post Hook 817 x x x x B-097 3675-00071 Gauge Plate Support Hole Cover (Large) x x x x x B-099 3675-00072 Gauge Plate Support Hole Cover (Small) x x x B-125 3875-00138 Slicer Deflector (Plastic) x x x B-126 A-3000-1 Rubber Support Foot x B-129 3475-00363 Lower Slicer Deflector Hinge x x x x x B-130 3475-00156 Upper Slicer Deflector Hinge x x x x x B-141 2375-00141 Belt, Knife Pulley x x x B-147 3775-00147 Gauge Plate Support x x x B-192 4375-00192 Knife Pulley Assembly x x x B-208 4575-00208 Foot Post Assembly

808 909 x B-765 3475-00765 Knife Box Cover x B-795 4575-00795 Knife Box Cover x x B-1099 3375-01099 Motor Pulley, 1/2" Hole

   x x x

3 3 5 0

The above parts are sold by Alfa International as replacement parts for Berkel Slicers. Alfa is not affiliated with Berkel.

914.273.2222 / 800.327.ALFA (2532) www.alfaco.com Fax 914.273.3666 / 800.328.ALFA (2532)

67

PARTS FOR BERKEL SLICERS

B-107

B-004

B-045 B-347

B-057

CORD

B-122 B-106

B-038 / B-127 B-121 B-108

B-042

B-033

B-336

B-111 B-109

B-259

AlfA # Berkel# DeScriptioN

B-404

B-753

fitS MoDelS

8

8 0 7

–

8 1 7

9

0

8

9

2

–

8

1

8

3

9

4

1

0

9

3

5

4

0

B-004 2675-00617 Toggle Switch - Quality Cutler Hammer / USA x x x B-033 2175-00106 Carriage Set Screw (Nylon) x x x x x B-038 02646-1H Carriage Rod Bushing (Old Style) x B-042 2375-00025

Motor Pulley

x x B-045 4975-09506 Index Knob - Red Plastic x x B-057 4975-00044 Gauge Plate Shim Set (Pkg./12) x x x B-106 3275-00061 Carriage Extension Spring x x x x x B-107 2275-00060 Rubber Switch Cover x x x x x B-108 4375-00031 Assembled Carriage Bearing (White) x x x x x B-109 2275-00149 Power Cord Clamp x x x x x x x B-111 2641-3K Micro/Unimax Switch x B-121 3275-00046 Rail Bumper x x x x x B-122 3375-00091 Carriage Rod (Stainless Steel) x x x x B-127 2275-00053 Carriage Rod Bushing (New Style) x x x x B-259 3675-00259 Boot for Switch x B-336 4675-00336 Worm Assembly x x B-347 4975-09280 Worm Wheel Assembly x x B-404 4975-00404 On/Off Switch x B-753 2675-00753 Relay Switch x CORD 4175-00031 Power Cord (3 Wire 8 Ft., 16 Gauge) x x x

3 3 5 0

The above parts are sold by Alfa International as replacement parts for Berkel Slicers. Alfa is not affiliated with Berkel.

914.273.2222 / 800.327.ALFA (2532) www.alfaco.com Fax 914.273.3666 / 800.328.ALFA (2532)

68

PARTS FOR BERKEL SLICERS

B-116

B-115

B-104

808 SG, SW

808 T

B-011

B-369

B-101

B-103

(Right Thread)

B-101

B-102

AlfA # Berkel# DeScriptioN

fitS MoDelS

8

8 0 7

–

8 1 7

9

0

8

9

–

8

9

1

8

9

B-105

2 3 4 0

B-011 3675-00165 Aluminum Sharpener Cover Knob x x B-101 3375-01123 Sharpener Spindle with Ball Bearings x x x

B-102 3375-1102 Gear Segment Pin x B-103 3375-01118 Truing Spindle (Right-Hand Thread) x x x B-104 3375-01121 Sharpener Link Screw x x x B-105 3301-03803 Sharpener Link x x x x x B-115 M-0611 Truing Stone Spindle Assembly - Right Hand Thread x x x x x B-116 M-0677 Grind Stone Spindle Assembly - Left Hand Thread x x x x x B-369 4975-00407 Sharpener Cover x 808 T 3375-00075 Truing Stone - Gray, Made in Germany x x x 808 SG 3675-00076

Gray Sharpening Stone (Replaces Brown), Made in Germany

x x x x x

808 SW 3675-0076W White Sharpening Stone, Made in Germany x x x

2 3 5 0

The above parts are sold by Alfa International as replacement parts for Berkel Slicers. Alfa is not affiliated with Berkel.

914.273.2222 / 800.327.ALFA (2532) www.alfaco.com Fax 914.273.3666 / 800.328.ALFA (2532)

69

BELTS FOR BERKEL SLICERS

BB-335 Motor Pulley and Round

Belt Replacement Kit

BB-808S BB-818L

BB-133 Belt Only

fitS MoDelS

2

3

8

9

3

0

1

0

ALFA # BERKEL # DESCRIPTION

BB-133 2375-00133 Round Belt Only (60 BB-141 2375-00141 Knife Pulley Belt x x x x BB-221 2301-5221 Knife Pulley Belt x x

") x x x x

NEW!! NEW!!

BB-335 4975-00335 Motor Pulley and Round Belt Kit BB-807/N 2642-0003A Ribbed Belt (S.N. 1500 and Up) BB-807/O 2642-00003 “V” Belt ( Up to S.N. 1499) BB-808S 2375-00015 Short Knife Pulley Belt (5M 560) BB-818L 2375-00016 Long Belt - Automatic (5M 1850) BB-818M 2375-00017 Medium Belt - Power Drive (7M 1060)

7

8

x x x x

x x

7

8

x x

x x x

x x

1

9

3

4

5

0

3

4

5

0

PARTS FOR BERKEL SLICERS

B-007

B-020 B-021 B-093 B-094 B-019

B-016 B-017*

ALFA # BERKEL # DESCRIPTION

fitS MoDelS

B-005

1 5 0

/ 1 7 0

1

g 8 0 / 1 9 0

g

c

r

B-005 4675-00203 Stainless Steel Upper Stud and Block for Drive Lever x x B-007 S6002-1D Lower Stud and Bearing x x B-016 12346 Table Spring x x B-017* 04700-2 Rubber Support Foot x x B-019 10034-5 Conveyor Feed Screw x x B-020 6004-10F Nylon Roller x x B-021 6004-6D Nylon Bushing x x B-093 6004-8A Wear Link x x B-094 10627-S Conveyor Needle Screw x x

* Note: Available while current stock lasts.

The above parts are sold by Alfa International as replacement parts for Berkel Slicers. Alfa is not affiliated with Berkel.

g

B

914.273.2222 / 800.327.ALFA (2532) www.alfaco.com Fax 914.273.3666 / 800.328.ALFA (2532)

70

PARTS FOR GLOBE SLICERS

G-039

Pkg./25

G-722

G-089

G-020

G-375

G-432

G-552

G-478

G-314

G-017

G-723

G-062 G-972

G-019 G-019B G-019P

G-423

G-369

ALFA # GLOBE # DESCRIPTION

G-017 395 Motor Gasket (Rubber) x x x x x xl x x x x x x x xl x x x xl x x xl x x x x x x x x x x

G-019 747-17 Knife Gear (Fiber) x x x x x xl x x x x x x x xl x x x xl x x xl x x x x x x x x x x

G-019B 747-17B Knife Gear (Bronze) x x x x x xl x x x x x x x xl x x x xl x x xl x x x x x x x x x x

G-019P 1084 Knife Gear (Nylon) x x x x x x x x x x

G-020 373 Motor Gear (Steel) x x x x x xl x x x x x x x xl x x x xl x x xl x x x x x x x x x x

G-039 261

G-046 370 Gear Housing Seal (Felt) x x x x x x x x x x x x x x x x x x x x x x x x x x

G-062 972-P-AS Knife Hub Assembly x x x x x x x x x x

G-089 747-16 Lock Ring x x x x x xl x x x x x x x xl x x x xl x x xl x x x x x x x x x

G-210 972-10P Knife Shaft “O” Ring x x x x x x x x x x

G-314 831-4 Upper Rim Guard Knob x x x x x x x x x

G-369 N/A Center Plate Repair Clip x x x x x x x x x x x x x x x x x x x x x x x x x x x x x x x x x x

G-375 375-A Mator Shaft Woodruff Key x x x xl x x x xl x x xl x x xl

G-423 952-9 Rim Guard Hinge Screw x x x x x x x x x

G-432 942-3 Knife Guard Knob x x x x x x x x x

G-478 747-8 Knife Shaft Nut x x x x x xl x x x x x x x xl x x x xl x x xl x x x x x x x x x x

G-552 955-2 Knife Cover Hub x x x x x x x x x x x x x x x x x x x x x x x x x x x x x x x x x x

G-722 972-2P Knife Hub Shaft x x x x x x x x x x

G-723 972-3P Lock Nut (Stainless Steel)

G-724 972-4P Spacer Bearing x x x x x x x x x x

G-725 972-5P Large Bearing (SS) x x x x x x x x x x x x x x x x x x x x x x x x x x x x x x x x x x

G-726 972-6P Bearing Cover (Stainless Steel) x x x x x x x x x x

G-727 972-7P Retaining Ring x x x x x x x x x x

G-728 972-8P Small Bearing x x x x x x x x x x x x x x x x x x x x x x x x x x x x x x x x x x

G-972 972-P-AS-2 Knife Plate Hub Assy. (Nylon) x x x x x x x

G-046

G-210

fitS MoDelS

Ctr. Plate Screws (Pkg./25, S/S)

All “LR”

Models

All “LR”

Models

All “LR”

Models

G-726

751

5 0

x x x x x xl x x x x x x x xl x x x xl x x xl

G-727

2

3

4

5

8

0

5

0

6

0

1

0

– 5

0 0 l

All “LR” Models

All “LR” Models All “LR” Models

All “LR” Models

x x x x x x x x x x

G-725

6

7

6

8

1

0

5

0

5

7

2

6

0

5

0

5

– 7

2 5 l

G-724

7

8

7

1

0

5

2

5

0

5

0 0

G-728

2

3

4

7

8

5

6

7

8

5

7

0

V

5

0

9

5

7

0

5

V

4

5

7

8

0

5

7

0

5 V

x = Fits Regular Model Version l = “l” Model Version

The above parts are sold by Alfa International as replacement parts for Globe Slicers. Alfa is not affiliated with Globe.

914.273.2222 / 800.327.ALFA (2532) www.alfaco.com Fax 914.273.3666 / 800.328.ALFA (2532)

71

G-066

PARTS FOR GLOBE SLICERS

Solid Knife Hub Components

G-054

G-068

G-051

G-065

G-025D

G-053

G-022

G-025C

G-067

G-022

G-099

G-098

G-056

G-046 G-012C

G-085

G-064

G-089

G-064N

G-019/G-019B/

G-019P

2

3

8

5

7

0

5 V

4

5

7

5

0

5

0

5 1 0

Pkg./25

Stainless

6

1

6

0

G-747

6

7

8

1

5

0

G-156

7

8

2

1

2

6

7

5

0

5

0

5

– 7

2 5 l

1

0

5

– 7

7 5 l

2

5

7

0

5

0

5

–

0

8 2 5 l

G-200

G-105

751

2

3

4

fitS MoDelS

ALFA # GLOBE # DESCRIPTION

G-012C 747-10 Knife Plate Coupling Seal x x x x x x x x x x x x x x

G-019 747-17 Fiber Knife Gear x x x x x x x x x x x x x x x x x x x x x x x x x x x x x x

G-019B 747-17B Bronze Knife Gear x x x x x x x x x x x x x x x x x x x x x x x x x x x x x x

G-019P 747-17N Knife Gear (Nylon) x x x x x x x x x x x x x x x x x x x x x x x x x x x x x x

G-022 747-5 Knife Plate Bearing (2 Req.) x x x x x x x x x x x x x x

G-025C 747-6

G-025D 747-9

G-046 370 Gear Housing Seal (Felt) x x x x x x x x x x x x x x x x x x x x x

G-051 747-19 Knife Shaft Retaining Ring x x x x x x x x x x x x x x

G-053 747-13 Knife Bearing Lock Washer x x x x x x x x x x x x x x

G-054 747-14 Knife Bearing Lock Nut x x x x x x x x x x x x x x

G-064

G-064N N/A Knife Plate Assembly (Nylon) x x x x x x x x x x x x x x x

G-065 747-2 Knife Plate Coupling x x x x x x x x x x x x x x

G-066

G-067 747-4 Plate Bearing Spacer (Lg.) x x x x x x x x x x x x x x

G-068 747-3 Plate Bearing Spacer (Sm.) x x x x x x x x x x x x x x

G-085 –––– Knife Plate Hub - Solid x x x x x x x x x x x x x x

G-089 747-16 Knife Hub Spiral Lock Ring x x x x x x x x x x x x x x x x x x x x x x x x x x x x x x

G-098 747-1SR Knife Shaft (Solid Hub) x x x x x x x x x x x x x x

G-099 747-7 Plate Washer (Solid Hub) x x x x x x x x x x x x x x

G-105 –––– Bearing Tool Set (3 Pcs.) x x x x x x x x x x x x x x x x x x x x x

G-156 747-18 Knife Gear Key x x x x x x x x x x x x x x x x x x x x x x x x x x x x x x

G-200 –––– Lock Nut Wrench (For G-054) x x x x x x x x x x x x x x

G-747 747-15S

932-BB-AS

747-11/12

Knife Plate Metal Shims (Pkg./12)

Plate Coupling Metal Shims (Pkg./12)

Knife Plate Hub Assembly x x x x x x x x x x x x x

Plate Cplg Set Screw and Key x x x x x x x x x x x x

Knife Mounting Screw SS (Pkg./25) x x x x x x x x x x x x x x x x x x x x x x x x x x

5 0

x x x x x x x x x x x x x x x x

x x x x x x x x x x x x x x

5

8

0

5

0

0 –

5 0 0 l

The above parts are sold by Alfa International as replacement parts for Globe Slicers. Alfa is not affiliated with Globe.

4

7

8

5

7

0

5

V

914.273.2222 / 800.327.ALFA (2532) www.alfaco.com Fax 914.273.3666 / 800.328.ALFA (2532)

72

G-056

PARTS FOR GLOBE SLICERS

New Style

G-1094

G-019N

G-237

G-193

G410

G-195

G-1090

G-1085

ALFA # GLOBE # DESCRIPTION

G-083

G-1037

G-1087

G-215 G-221

fitS MoDelS

G-241

3 6 0 0

G-020P

3 8 5 0

G-019N 747-17N Wide Key Slot Nylon Gear x x x G-020P 1059 Plastic Motor Gear x x x G-056 1056 Spring Loaded Cover Knob x x x G-083* 1083 Spacer x x x G-1094 1094 Knife Hub Assembly x x x G-193 1193 Plug x x x G-195 1195 Knife Bolt Assembly x x x G-1090 1090 Knife Locating Hub x x x G-1037* 1037 Upper Bearing Housing x x x G-237 1237 Standoff x x x G-241 1241 Bearing Assembly Gasket x x x G-1085 1085 Knife Shaft x x x G-410 4100020-S Motor Worm Gear x x x G-1087* 1087 Retaining Ring, “C” Style

x x x G-215 1215 Bowed Washer x x x G-221 1221 Thrust Washer x x x

*Note: Available while current stock lasts.

The above parts are sold by Alfa International as replacement parts for Globe Slicers. Alfa is not affiliated with Globe.

3 9 7 5

914.273.2222 / 800.327.ALFA (2532) www.alfaco.com Fax 914.273.3666 / 800.328.ALFA (2532)

73

PARTS FOR GLOBE SLICERS

G-001C

G-031

G-033

G-029 SS

G-028

and G-029

G-032

G-154

G-142

G-030

G-123

G-012B

G-086 Pkg./4

G-021

G-061

G-011

G-090

G-021

G-741-4

G-137

Pkg./25

G-141

G-012A

NEW!!

751

G-741-APC

2

3

2

5

6

0

4

8

0

5

0

fitS MoDelS

ALFA # GLOBE # DESCRIPTION

G-001C 741-1

G-011 306-1 End Weight Rod Spring x x x x x x x x x x x x x x x x x x x x x

G-012A 380 Knife Plate Coupling Seal x x x x x x

G-012B 382-2 Knife Plate Coupling Seal x x x x x x

G-021 377 Knife Plate Bearing (2 Needed) x x x x x x

G-025A 381-A

G-025B 381

G-028 441-PC

G-029

G-029 SS* 741-SS APC Stainless Steel End Weight

G-030 741-3 End Weight Handle and Stud x x x x x x x x x x x x x x x x x x x x x x x

G-031

G-032

G-033 291-312 End Weight Slide Bushing x x x x x x x x x x x x x x x x x x x x x x x

G-061 307-1 End Weight Rod Spacer x x x x x x x x x x x x x x x x x x x x x

G-086 741-4/5A Slide Bumper Set (Pkg./4) x x x x x x x x x x x x x x x x x x x x x x x x x

G-090 487-3 End Weight Rod Clip x x x x x x x x x x x x x x x x x x x x x

G-093 383 Knife Plate Washer x x x x x x

G-123 747-2A+B End Weight Lock Pin (w/Nut) x x x x x x x x x x x x x x x x x x

G-137 375 Knife Mounting Screw (Pkg./25) x x x x x x x

G-141 N/A Bumper Set, 3/16 (Pkg/10) x x x x x x x x x x x x x x x x x x x x x x x x x x x x x

G-142 499 End Weight Lock Button x x x x x x x x x x x x x x x x x x x x

G-154 741-3A End Weight Handle Stud x x x x x x x x x x x x x x

G-741-APC

G-741-4 741-SS4 Prong Set Stainless Steel x x x

741-APC-AS

741-PC2/3

741-PC1/5/6

741-SS-APC End Weight Stainless Steel x x x

Stainless Steel End Weight Rod

Brass Knife Plate Shims (Pkg./12)

Knife Plate Paper Shims (Pkg./12)

End Weight Assembly-Long (Old Style) x x x x x

End Weight

End Weight Prong Set x x x x x x x x x x x x x x x x x x x x x x x x x

Prong Fastener Set x x x x x x x x x x x x x x x x x x x x x x x x x

Assembly

-Long (New Style)

x x x x x x x x x x x x x x x x x x x x

x x x x x x x x x x x x x x x x x x x x x

x x x x x x

x x x x x x x x x x x x x x x x x x

Assembly

x x x x

G-025A

G-025B

riNg kNife huB coMpoNeNtS

5

6

7

0

1

6

8

1

0

– 5

0 0 l

0

1

5

0

5

7

2

6

0

5

0

5

– 7

2 5 l

G-093

7

8

2

3

7

1

2

5

7

8

0

5

0

5

– 7

7 5 l

0

–

0

8 2 5 l

8

5

7

0

5 V

4

5

6

5

0

*Available while current stock lasts.

The above parts are sold by Alfa International as replacement parts for Globe Slicers. Alfa is not affiliated with Globe.

914.273.2222 / 800.327.ALFA (2532) www.alfaco.com Fax 914.273.3666 / 800.328.ALFA (2532)

74

G-081

PARTS FOR GLOBE SLICERS

G-122

G-112

Pkg./4

G-121

G-084

G-096

G-097

G-101

G-004S

G-118

G-004

G-113

G-042

G-091

G-023

G-161

G-087

G-006A

G-110

G-059

fitS MoDelS

ALFA # GLOBE # DESCRIPTION

G-088

751

2

3

4

5

6

7

8

5

8

0

1

6

8

1

2

6

7

0

5

0

5

0

5

0

5

– 5

0 0 l

0

– 7

2 5 l

7

5

0

5 –

7 7 5 l

8

1

2

5

0

5 –

8 2 5 l

G-004 481-1 Chute Support T-Bolt x x x x x x x x x x x x x x x x x x x x x G-004S N/A

T-Bolt Replacement Stud

x x x x x x x x x x x x x x x x x x x x G-006A 796B-685 Chute Support Knob x x x x x x x x x x x x x x x x x x x x x G-023 707-B Chute Arm Knob (Manual) x x x x x x G-042 833-A Chute Chain Slide Stud Assembly x x x x x x G-059 830 Chain Slide (New Style) x x x x x x G-081 766-2B 64 Link Slide Chain x x x x x x G-084 766-5-S

Chain Connector Roller

x x x x x x x x x G-087 703-1 Chute Arm Bushing Sleeve x x x x x G-088 708 Chute Arm Knob Retaining Clip x x x x x G-091 853-1 Hinge Pin Bushing x x x x x G-096 612 Slide Chain Drive Block x x x x x x x x x G-097 821-4 Chain Guard Knob x x x x x x G-101 766-6 Chain Connector Clip x x x x x x x x x x x G-110 791 Chute Arm Bushing x x x x x x x x x x x x x x x x x G-112 762-4 Chain Sprocket Bushing x x x x x G-113 831 Chain Slide Block x x x x x x G-118 482-B Chute Support Handle (SS) x x x x x x x x x x x x x x x x x x x x G-121 740 Chute (Meat Table) x x x x x x x x x x x x x x x x x x x x G-122 439-1/439

Chute Support Screw Kit (Pkg./4)

x x x x x x x x x x x x x x x

G-161 909-1 Chain Slide Knob Assembly x x x x x

The above parts are sold by Alfa International as replacement parts for Globe Slicers. Alfa is not affiliated with Globe.

914.273.2222 / 800.327.ALFA (2532) www.alfaco.com Fax 914.273.3666 / 800.328.ALFA (2532)

75

PARTS FOR GLOBE SLICERS

G-005

285 SS 285 HC

G-007

963-C 963-S

G-822 G-26A

G-038B G-038C G-038D

G-034 G-035

G-002

G-003AN

G-018

G-003N

G-016

G-879

(P

SERVICE TIP: G-822 Knife Guard does not come with G-038B, C, and D Supports or G-039 Mounting Screws.

751

2

3

4

5

6

7

5

8

0

1

6

8

1

2

6

0

5

0

– 7

2 5 l

ALFA # GLOBE # DESCRIPTION

FI T S Mo D E l S

0

5

0

5

0

– 5

0 0 l

5

G-002 386 Knife Center Plate Stud x x x x x 1 x x x x x x x x x x x x 2 G-003AN 799 Center Plate Support Knob Only x x x x x 1 x x x x x x x 3 x x x 4 x x 2 G-003N 879-1 Center Plate Support Knob & Shaft x x x x x x x x x x x x x x x x x x x x x G-005 476-246 Lower Knife Guard Screw 652/817 Head Assembly x x x x x x x x x x x G-007 385-1 SS Center Plate Support Insert x x x x x x x x x x x x x x x x x x x x x G-016 253 Blade Scraper Clamp Assembly x x x x x x x x x x x G-018 215A Blade Scraper Nylon/Steel x x x x x x x x x x x x G-26A 444A Aluminum Knife Guard (Old Style) x x x x x x x x x x x x G-034 829-1,2,3,4 Scraper/Clamp Assy. (New Style) x x x x x x x x x G-035 829-2 Knife Scraper Blade Only x x x x x x x x x G-038B 384-1 Center Plate Support x x x G-038C 384-2 Center Plate Support x x x x x x G-038D 384-3 Center Plate Support x x x x x x x x x G-039 261 Center Plate Screws (Pkg./25) x x x x x x x x x x x x x x x x x x x x x G-822 915-5 Knife Guard w/o G-038D Support x x x x x x x x x G-879 879 Knife Guard Interlock Assembly x x x x 285 HC 746-BP Slicer Blade x x x x x x x x x x x x x x x 285 SS 746SS-BP Slicer Blade x x x x x x x x x x x x x x x 963-C 963-HC Slicer Blade x x x x x x x x x x x x x x x 963-SS 963-S Slicer Blade x x x x x x x x x x x x x x x

7

6

7

5

0

5 –

7 7 5 l

G-039

k G ./25)

8

1

2

5

0

8 2 5

– 8

2 5 l

1 FI T S Mo D E l 500 oN l y 2 FI T S Mo D E l 825 oN l y 3 FI T S Mo D E l 725 oN l y 4 FI T S Mo D E l 775 oN l y

The above parts are sold by Alfa International as replacement parts for Globe Slicers. Alfa is not affiliated with Globe.

914.273.2222 / 800.327.ALFA (2532) www.alfaco.com Fax 914.273.3666 / 800.328.ALFA (2532)

76

PARTS FOR GLOBE SLICERS

B-111

G-528

G-045

G-897

G-044

G-036

ALFA # GLOBE # DESCRIPTION

CORD 132-3 8 ft. Power Cord 16 Gauge x x x x x x x x x x x x x x x x x x x x x x x x x x x

G-017 395 Motor Gasket (Rubber) x x x x x x x x x x x x x x x x x x x x x

G-036 513 Micro / Unimax Switch x x x x x x x x x

G-044 648/329 Gear Motor Switch (Auto) x x x x x x x x x x x x x x x x x x x x x

G-045 785 Main On/Off Toggle Switch x x x x x x x x x x x x x x x x x x x x x

G-048 751-1DK Klixon Relay x x x x

G-049 803-1DR Klixon Relay x x x x x x x x x x x x x x

G-063 965

B-111 855 Limit Switch - Micro / Unimax 1 x x x

G-189 N/A Switch Boot x x x x x x x

G-521 952-10 Switch, On/Off x x x x x x x

G-528 952-8 3 Position Toggle Switch x x x x x x

G-529 952-9 Relay Switch (Main) x x x x x x x

G-834 834-1 Motor (OEM) x x x x x x x

G-897 897 Main On/Off Switch (HD) x x x x x x x x x x x x x x x x x x x x x

Motor Gear Hardware Set

G-048 / G-049

G-189G-521

fitS MoDelS

x x x L x x x L x x L x x L

751

CORD

G-063

G-834

G-529

G-017

2

3

4

5

6

7

8

2

3

5

8

0

1

6

8

1

2

6

7

1

2

5

7

8

0

5

0

5

0

5

0

5

0

5

0

5

0

5

0

– 5

0 0 l

– 7

2 5 l

– 7

7 5 l

5

–

0

8 2 5 l

5

7

0

5

0

V

3

6

7

8

0

5

0

4

3 8 7 5 V

4

3

5

7

9

0

5

7

0

5 V

4 8 7 5 V

1 Fits Model 500 Only L Fits “L” Models Only

The above parts are sold by Alfa International as replacement parts for Globe Slicers. Alfa is not affiliated with Globe.

914.273.2222 / 800.327.ALFA (2532) www.alfaco.com Fax 914.273.3666 / 800.328.ALFA (2532)

77

PARTS FOR GLOBE SLICERS

G-041

G-040

G-092

G-074

G-863

G-463

G-400

G-070

G-069

G-467

751

fitS MoDelS

ALFA # GLOBE # DESCRIPTION

2

3

4

5

6

7

8

2

3

2

5

8

0

1

6

8

1

2

6

7

1

2

5

7

8

6

0

5

0

5

0

5

0

5

0

5

0

5

0

5

0

– 5

0 0 l

– 7

2 5 l

– 7

7 5 l

0

–

0

8 2 5 l

5

7

0

5

0

V

3

6

7

8

0

5

0

4

3 8 7 5

V

4

3

5

7

9

0

5

7

0

5 V

G-040 494-SS Stainless Steel Meat Table with Support (Old Style) x x x x x x G-041 453-AS Table Adjustment Gear Assy. x x x x x x x x x x x x x x x x x x x x x x x x x G-069 436-5NS Slide Bumper (Auto) x x x x x x x x x x x x x x x x x x x x x x x G-070 436-1 Slide Bumper (Manual) x x x x x x x x x x x x x x x x x x x x x x x x x G-074 407-1 Table Adjusting Knob x x x x x x x x x x x x x x x x x x x x G-092 349-A Slide Shim Set (12 Assorted) x x x x x x x x x x x x x x x x x x x x x x x x x G-400 N/A

Spacer Ring Adjustable Wrench x x x x x x x x x x x x x x x x x x x x G-463 463-AS Grind Stone Spindle x x x x x x x x x x x x x x x x x x x x x x x x x x x x x x x x x G-467 467-AS Truing Stone Spindle x x x x x x x x x x x x x x x x x x x x x x x x x x x x x x x x G-863 863 Table Slide (New Style) x x x x 075 SG 214A Grinding Stone - Grey x x x x x x x x x x x x x x x x x x x x x x x x x x x x x x x x x x x 075 SW 214-1 Grinding Stone - White x x x x x x x x x x x x x x x x x x x x x x x x x x x x x x x x x x x 075 T 213 Truing Stone x x x x x x x x x x x x x x x x x x x x x x x x x x x x x x x x x x x

4 8 7 5

V

The above parts are sold by Alfa International as replacement parts for Globe Slicers. Alfa is not affiliated with Globe.

914.273.2222 / 800.327.ALFA (2532) www.alfaco.com Fax 914.273.3666 / 800.328.ALFA (2532)

78

G-739

PARTS FOR GLOBE SLICERS

G-861-L

G-047

G-856

G-128-1

ALFA # GLOBE # DESCRIPTION

G-711 G-856-2

751

fitS MoDelS

G-014

2

3

4

5

6

7

5

8

0

1

6

0

5

0

– 5

0 0 l

8

0

5

7

1

2

0

5

0

G-015

7

8

2

6

5 –

7 2 5 l

7

0

5

0

8

7

1

2

5

0

– 7

7 5 l

G-014 817 Rubber Support Foot (Screw) x x x x x x x x x x x x x x x x x

G-015 263 Rubber Support Foot (Plain) x x x x x x x x x x x x

G-047

526/758 P

Waste Bucket (Plastic) x x x x x x x x x x x x x x x

G-128-1 710-1 Pilot Light Bulb x x x x x x x

G-711 711 Pilot Lens Cap x x x x x x x x x

G-739 739-3 Deflector Hinge Pin (Each) x x x x x x x x x x x x x x

G-856 856 Stainless Steel Receiving Tray x x x

G-856-2 856-2 Receiving Tray Retainer Knob x x x

G-861-L 861-L-AS Deflector with Light Hole x x x x x x

8 2 5

– 8

2 5 l

The above parts are sold by Alfa International as replacement parts for Globe Slicers. Alfa is not affiliated with Globe.

914.273.2222 / 800.327.ALFA (2532) www.alfaco.com Fax 914.273.3666 / 800.328.ALFA (2532)

79

PARTS FOR GLOBE CHEFMATE SLICERS

ALL NEW!!

CM9 HC CM10 HC CM12 HC

GC-33 GC-34

GC9 S

GC12 S

GC-48-A GC-49-A GC-50-A

GC-54 GC-55

GC-41A

GC-76

GC-40

The above parts are sold by Alfa International as

replacement parts for Globe Slicers. Alfa is not

GC9 T

GC12 T

GC-35

GC-12

GC-27

GC-25 GC-26

GC-28

GC-31 GC-32

GC-48 GC-49 GC-50

GC-52

affiliated with Globe.

GC-56-A

GC-59-A

GC-36 GC-38

GC-62 GC-63 GC-64

GC-71 GC-72

GC-65A GC-66A GC-67A

GC-47-B

GC-45 GC-46 GC-47

FITS MODELS

ALFA # GLOBE # DESCRIPTION GC9 GC10 GC12 GC12D

GC9 S 5 Sharpening Stone x x GC12 S 6 Sharpening Stone x x GC9 T 7 Truing Stone x x GC12 T 8 Truing Stone x x GC-12 12 Cover Release Knob x x x GC-25 25 Index Knob x GC-26 26 Index Knob x x GC-27 27 Indexing Cam x x x GC-28 28 On/Off Switch x x x x GC-31 31 Capacitor x GC-32 32 Capacitor x x x GC-33 33 Table Adjustment Assembly x GC-34 34 Table Adjustment Assembly x GC-35 35 Table Adjustment Assembly x GC-36 36 Motor 115V, 60 Hz, 1 PH x GC-38 38 Motor 115V, 60 Hz, 1 PH x x GC-40 40 Rubber Foot (4), Old Style x x x GC-41-A 41-A Foot Screw x x x GC-45 45 Chute Slide Assembly x GC-46 46 Chute Slide Assembly x GC-47 47 Chute Slide Assembly x GC-47-B 47-B Small Bearing x x x x GC-48 48 Slide Rod x GC-48-A 48-A Slide Rod Spring x GC-49 49 Slide Rod x GC-49-A 49-A Slide Rod Spring x GC-50 50 Slide Rod x GC-50-A 50-A Slide Rod Spring x x GC-52 52 Drive Hub Assembly x x x GC-54 54 Drive Belt x x GC-55 55 Drive Belt x CM9 HC 56 Knife x GC-56-A 56-A Knife Mounting Screw x x x x CM10 HC 57 Knife x CM12 HC 58 Knife x GC-59-A 59-A Knife Cover Insert x x x GC-62 62 End Weight Assembly x GC-63 63 End Weight Assembly x GC-64 64 End Weight Assembly x GC-65-A 65-A End Weight Rod x GC-66-A 66-A End Weight Rod x GC-67-A 67-A End Weight Rod x GC-71 71 Chute Knob x GC-72 72 Chute Knob x x x GC-76 76 Bottom Enclosure Nut x x x

914.273.2222 / 800.327.ALFA (2532) www.alfaco.com Fax 914.273.3666 / 800.328.ALFA (2532)

80

PARTS FOR HOBART SLICERS

H-034

H-202

H-601

H-081 H-082 H-083

H-452

H-043

H-041

H-042

H-020

H-124

H-007

1612 T

H-833

1612 SG 1612 SW

H-702

H-979

H-047

H-100 (Sharpener Assembly with Ball Bearings for smoothness)

fitS MoDelS

AlfA # hoBArt# DeScriptioN 512 1612 1712 1812 1912

H-007 M-74007 Grinding Stone Assembly with Stone x x H-020 M-75135 Meat Grip Bushing (2 required) x x H-034 M-72579 Meat Grip Retaining Clip x x H-041 M-70386 Meat Grip Washer x x H-042 437006 Meat Grip Handle Washer x x H-043 438280 Meat Grip Bushing (Plastic) x x H-047 M-3404-7 Truing Stone Retaining Screw x x H-081 N/A Meat Grip Assembly (Aluminum) x x x x H-082 437126 Meat Grip Assembly (Cast Steel) x x x x H-083 N/A Meat Grip Assembly (Stainless Steel) x x x x H-100 274926 Complete Sharpener Assembly with Stones & Ball Bearings for smoothness x x x H-124 437124 Meat Grip Arm Bearing x x H-202 70202 Meat Grip Handle x x H-452 70344, 45 Handle Retaining Screw and Washers x x H-601 70360-1 Meat Grip Bumpers (5 per Pkg) x x H-702 B-109702 Sharpener Thumb Screw x x H-833 M-74833 Grinding Stone Retaining Screw x x H-979 M-73979 Truing Stone Assembly with Stone x x 1612 SG M-73851 Grinding Stone-Gray (Made in Germany) x x x 1612 SW M-73851W Grinding Stone-White (Made in Germany) x x x 1612 T M-13201 Truing Stone (Made in Germany) x x x

The above parts are sold by Alfa International as replacement parts for Hobart Slicers. Alfa is not affiliated with Hobart.

914.273.2222 / 800.327.ALFA (2532) www.alfaco.com Fax 914.273.3666 / 800.328.ALFA (2532)

81

H-037

PARTS FOR HOBART SLICERS

H-097

H-494

NEW!!

H-014

NEW!!

H-096

H-027

H-214

H-022

H-029

H-948

H-530A

H-310

H-015

H-023

H-036

H-025

H-035

H-681

fitS MoDelS

H-028

H-024

H-019

AlfA # hoBArt# DeScriptioN 1612 1712 1812 1912

H-014 C-108197-5 Carriage Thumb Screw x x H-015 A-107364 Carriage Mount Washer x x H-019 B-18682-1 Rubber Support Foot with Threaded Stud x x H-022 M-86260 Carriage Adjusting Screw with “Nylok” x x H-023 BB-4-11 Carriage Rod Bearing x H-024 V-21046-1 Carriage Washer Bumper x x H-025 M-88921 Carriage Bushing x x H-027 M-83416 Slide Rod Plug x x H-028 RR-9-15 Retaining Ring x x H-029 M-88298 Index Worm Washer x x H-035 V-12734 Slide Rod End Spring x H-036 M-20622 Bumper Spring x x H-037 P88740-2 Gauge Plate Support Assembly x x H-096 118175 Slicer Thickness Index Dial (Ring only) x x H-097 87493/4/5 Index Shaft and Worm Assembly without Knob x x H-214 114214 Indexing Knob x x x x H-310 SC-23-10 Stainless Steel Screw (5 per Pkg.) x x x x H-494 87494 Index Shaft only - with Pin x x H-681 M-83681 Support Foot x H-530A M-70425 Indexing Plate and Spring Assembly with Roller

x x

H-948 76948 Index Disc x x x x

The above parts are sold by Alfa International as replacement parts for Hobart Slicers. Alfa is not affiliated with Hobart.

914.273.2222 / 800.327.ALFA (2532) www.alfaco.com Fax 914.273.3666 / 800.328.ALFA (2532)

82

PARTS FOR HOBART SLICERS

H-030 H-031

H-098

H-747

H-016

H-038

H-039 CORD

H-934

H-018

H-984

H-021

H-032

H-017

H-147

H-148

H-845

fitS MoDelS

AlfA # hoBArt# DeScriptioN 1612 1712 2612 2712 2812 2912

CORD B-117542-37 Cord and Plug-3 Wire, 16 Gauge x x H-016 M-70241 Knife Guard Center Stud x x H-017 P-70198 Center Stud Lock Knob x x H-018 P-70196 Back Knife Knob and Stud-Top x x H-021 P-118-484 Back Knife Knob and Stud-Center x x H-030 BB-18-12 Motor Bearing-Small x x H-031 BB-15-41 Motor Bearing-Large x x H-032 S-82952-2 Knife Guard-Back x x H-038 N/A Stud Correcting Kit (Replaces H-016) x x H-039 BB-5-30 Motor Bearing-Medium x x H-098 B-8711-148 On/Off Toggle Switch x x H-147 N/A Switch Rod Yoke x x H-148 N/A Indicator Light x x H-747 478747 Truing Stone x x x x H-845 438845 Poly “V” Belt x x x x H-934 M-82934 Retaining Ring x x H-984 290984 Fence Thumb Screw x x x x x x

The above parts are sold by Alfa International as replacement parts for Hobart Slicers. Alfa is not affiliated with Hobart.

914.273.2222 / 800.327.ALFA (2532) www.alfaco.com Fax 914.273.3666 / 800.328.ALFA (2532)

83

PARTS FOR HOBART SLICERS

1612 SS 1612 HC

H-066

H-914

H-322

H-011

H-003

H-882

H-008

H-104

H-004

H-033

H-012

H-740 H-324 H-622

H-005

H-348

H-435

H-848

f

H-010

H-013

i t S Mo D e l S

Al f A # Ho b A r t# De S C r i p t i o n 1612 1712 1712r 1812 1912 2812

H-003 WS-8-9 Worm Gear Washer x x H-004 BB-18-43 Lower Main Bearing x x H-005 BB-16-22 Upper Main Bearing x x H-008 M-70302 Knife Shaft Worm Gear (Bronze) x x H-010 P-111154 Knife Shaft Ring x x H-011 M-70406 Motor Gear (Steel) x x H-012 NS-3223/WS750/V1777/8 Motor Gear Hardware Set x x H-013 73356 Knife Screw and Plug Assembly x x H-033 P-70348 Knife Shaft Hub Assembly x x H-066 70314-1 Knife Shaft Hub Insert (Steel) x x H-104 V-104001 Worm Gear Thrust Washer x x H-322 NS-32-29 Knife Shaft Nut x x H-324 45324 Truing Stone Spring x x H-348 73348 Woodruff Key x x H-435 P-70435 Knife Shaft x x H-622 RR-6-22 Retaining Ring for Truing Arm x x H-740 PG-7-40 Truing Stone Pin, SS x x H-848 437848 Stone Repair Kit x x H-882 119882 Truing Stone Assembly x x H-914 113914-3-4 Carriage High Fence Assembly x x x 1612 HC N/A Slicer Blade (Chrome) x x x x x x 1612 SS 439870-1 Slicer Blade (Stainless Steel) x x x x x x

The above parts are sold by Alfa International as replacement parts for Hobart Slicers. Alfa is not affiliated with Hobart.

914.273.2222 / 800.327.ALFA (2532) www.alfaco.com Fax 914.273.3666 / 800.328.ALFA (2532)

84

PARTS FOR HOBART SERIES

ALL NEW!!

2000

SLICERS

H-320 H-345 H-354

H-579

H-357

H-471

H-058

H-370

H-555

H-158

H-118

H-373

H-623 H-658

H-152

H-375

H-851

H-417

H-420

H-668

H-432

H-890

H-438

H-691 H-708 H-741 H-747

H-450

H-897

fitS MoDelS

AlfA # hoBArt# DeScriptioN 2000 SerieS e MoDelS

H-058 WS-30-58 Index Cam Washer x H-118 295118 Low Fence Carriage* x H-152 438915-2 Knife Shaft Assembly x H-158 BB-15-08 Knife Shaft Bearing x x H-320 875320 Meat Grip Handle x H-345 875345 Carriage Handle x H-354 875354 Slide Rod and Knob Assembly x H-355 875355 Product Deflector x H-357 875357 Meat Grip Hanger x H-370 875370 Dial Assembly x H-373 875373 Large Hole Plug x H-375 875375 Small Hole Plug x H-417 WL-4-17 Knife Shaft Lockwasher x H-420 478420 Transport Roller Assembly x H-432 478432 Index Backlash Spring x H-438 439085 Indexing Knob x H-450 875450 Tray Assembly Knob x H-463 479463 Meat Grip Handle Washer x H-471 873847-1 Sharpener Assembly x H-555 477555 Bumper x H-579 875039 Carriage Nut x H-623 RR-6-23 Roller Transport Retainer Ring x H-658 875658 Bearing Transport x H-668 875668 On/Off Knob x H-691 439691 Grinding Wheel/Stone Service Kit x H-708 435708 Stainless Steel Back Up Washer x x H-741 NS-17-41 Knife Shaft Nut x H-747 478747 Truing Stone x H-851 873851 Plunger and Bearing Assembly x H-890 438890 Cam Shaft x H-897 438897 Plate Pivoting Spring x

Fits Models with Stainless Steel Carriages

*

The above parts are sold by Alfa International as replacement parts for Hobart Slicers. Alfa is not affiliated with Hobart.

H-355

H-463

914.273.2222 / 800.327.ALFA (2532) www.alfaco.com Fax 914.273.3666 / 800.328.ALFA (2532)

85

BAND SAW BLADES

Alfa’s Band Saw Blades redefine the cutting edge. These are the highest quality Band Saw Blades available and they provide the following features & benefits:

Material: Premium quality hardened steel for sharp edges and long life.

Teeth: Consistent profile for straight smooth cuts, producing a more saleable product. Ideal

sizing, curvature and spacing for fast cutting.

Welds: Fully guaranteed against breakage. Computer controlled welded to be extremely strong,

uniform, smooth and nearly invisible.

Wrapping: Individually wrapped in moisture resistant paper & imprinted with length.

Quality: Tested at each step of the manufacturing process to ensure uniform strength and

consistency.

Excellent All-Purpose Blades at Economical Prices!

AlfA # teeth per iNch Size uSe

420-(length) 4 .022" x 5/8" General Use - Fresh Meat 320-(length) 3 .022" x 5/8" General Use - Fresh Meat

For example: #420-069 is our part number for a blade 69” long.

Lengths of Available ALFA Stock Sizes (All sizes are in Inches)

63 69 71 72 74 78 79 82 87 91 96 98 102 106 108 110 112 116 118 122 124 126 128 135 142

Note: Additional Sizes & Styles along with Coil Stock available via Special Orders. Please call for details.

If your blade speed is less than 4000 sfpm (1220 smpm) a 4TPI band is recommended. If your blade speed is greater than 4000 sfpm (1220 smpm) a 3TPI band is recommended.

4TPI 3TPI

2000 4000 6000 8000

SFPM (square feet per minute)

Blade Profile

4 Teeth Per Inch

Blade Specifications:

Height - 5/8"

Thickness - .022"

4 Teeth per inch

Blade Profile

3 Teeth Per Inch

Blade Specifications:

Height - 5/8"

Thickness - .022"

3 Teeth per inch

Note: Please refer to the cross-reference chart on the following page to determine the proper blade length you need to order.

914.273.2222 / 800.327.ALFA (2532) www.alfaco.com Fax 914.273.3666 / 800.328.ALFA (2532)

86

BlADe MAke

BERKEL

V-12, Jim Vaughn 102" GB-16, V-16 126 5, Junior 135

BIRO

A, 11 78" AA, AA-1, 22 91 1433 108" Super BB 112 33 116" 34 118" 3334, 3336 124 44 135"

BIZERBA

FK30, FK31 96"

BUTCHER BOY

B-12, SA-12 98" B-14, SA-14, 1435 112 Easy Speed, Senior 118 B-16, SA-16 126

Note: Other sizes available by special order. Note: We recommend a 3 teeth per inch blade for the newer,

BAND SAW BLADE CROSS REFERENCE GUIDE

AND MoDel leNgth

" "

"

" " "

BlADe

AND MoDel leNgth

MAke

GLOBE - STIMSON

72 66" 79 72" 111 91" 140 110" 160 122"

HOBART

5012, 5212, 5212F 98" 5013, 5213, 5313, 106 5014, 5114, 5214, 5413 112 5414, 5514, 5514HS, 5614 112 6614 126" 5016, 5116, 5216, 5216HS 128 5700, 5701, 5801, 6801 142

HOLLYMATIC

High Yield 16 126"

KENTMASTER

14 112"

TORREY

ST-200-AL and PE 79" ST-295 116

high speed band saws.

" " "

" "

"

!!

NEW

ALFA’S Replacement Reciprocating Blades for Grasselli Slicers are machined from high quality Stainless Steel for long life. Each blade is 435 MM (17.13”) long and guaranteed to be true within .001 MM.

AlfA # DeScriptioN ApplicAtioN

GB-KE 5/8" W x .022" thick – Knife Edge Boneless Cutting GB-6TWS 5/8" W x .022" thick – 6 TPI w/set Bone-in Cutting GB-SC 7/16" W x .022" thick - Scalloped Boneless Cutting

GB-4TWS 5/8

GRASSELLI SLICER BLADES

GB-KE

Boneless Cutting

GB-6TWS

Bone-in Cutting

GB-SC

Boneless Cutting

GB-4TWS

Bone-in Cutting

" W x .022" thick – 4 TPI w/set Bone-in Cutting

Note: These blades ﬁt all equipment models and are Sold in complete sets of 25 blades per package.

The above parts are offered as replacement parts for Grasselli slicers. ALFA is not afﬁliated with this ﬁrm.

914.273.2222 / 800.327.ALFA (2532) www.alfaco.com Fax 914.273.3666 / 800.328.ALFA (2532)

87

PARTS FOR BIRO BAND SAWS

BIS230

BIS193

BIS614

BIS602A Assembly

BIS174

BIS16132

BIS602

BIS131

BIS130

BIS295

BIS179

BIS295A Assembly

BIS130A Assembly

Note: Parts in these

BIS229

Assemblies are also available separately.

BIS014

BIS011 BIS240

fitS MoDelS

AlfA # Biro # DeScriptioN 11 22 33 34 44 1433 3334 4436

BIS011 11 Ratchet Trigger x x x x x x x x

BIS014 14 Door Hinge and Bracket x x x x x

BIS130 130 Rear Scraper Holder x x x x x x x

BIS131 131 Blade Scraper (1 only, 2 included in

BIS130A Assembly) x x x x x x x

BIS130A A130 Rear Scraper/Cleaner Assembly Includes:

1 BIS130 Holder, 2 BIS131 Steel Scrapers

& Screws

x x x x x x x

BIS174 175-2-S Thumb Screw x x x x x x

BIS193 193 Saw Guide Bar Spring x x x x x

BIS230 230 Upper Shaft Seal x x x x x x x

BIS240

240 Trigger Spring x x x x x x x x BIS295 295 Scraper Arm x x x x x x x x BIS179 179 Wheel Scraper / Cleaner x x x x x x x x BIS229 S229 Spring x x x x x x x x

BIS295A A295 Wheel Scraper/Cleaner Assembly Includes:

1 BIS179 Cleaner, 1 BIS295 Arm, 1 BIS229 Spring Assembled with Bolt, Screw, Nut & Washer

x x x x x x x x

BIS602 602B Upper Saw Guide and Carbide Block x x x x x x

BIS602A A602 Upper Saw Guide and Bracket Assembly Includes: BIS602 Upper Guide, Carbide Block and

Bracket with Screws x x x x x x x x BIS614 A16014 Door Hinge and Bracket x x BIS16132 16132 Cleaner Bracket Holder x x x x x x

914.273.2222 / 800.327.ALFA (2532) www.alfaco.com Fax 914.273.3666 / 800.328.ALFA (2532)

88

PARTS FOR BIRO BAND SAWS

PARTS FOR GLOBE SLICERS

BIS265

BIS227

BIS604

BIS363

BIS6159

Note: Most Parts below are sold

separately or as part of the Assembly

BIS177

BIS119

BIS268

BIS415

Sold only as

part of Assembly

BIS119

BIS177

BIS415A Assembly

BIS159

fitS MoDelS

AlfA # Biro # DeScriptioN 11 22 33 34 44 1433 3334 4436

BIS159 159 Table Bearing 1-3/16

" Diameter x x x BIS227 227 Upper Main Bearing x x x x x x BIS265 S265 Gauge Spring x x x x x x x

BIS363 A363 Lower Main Bearing x x x x x x

BIS415A A415/51021 Complete Stationary Bar Assembly Includes:

x x x x x x x x BIS415 415D Stationary Bar x x x x x x x x BIS268 268 Stud for Guide and Filler Block x x x x x x x x BIS119 119 Lower Saw Guide with “V” Front x x x x x x x x BIS177 177 Filler Block x x x x x x x x BIS604 604 Lower Carbide Block x x x BIS3232* 33232 Bone Dust Pan-33 New Style 17-1/2 BIS6159 16159

Table Bearing 1-7/16

" x x x x x x x x

" x 10" x

BIS3232

*Available while current stock lasts.

The above parts are sold by Alfa International as replacement parts for Biro Band Saws. Alfa is not affiliated with Biro.

914.273.2222 / 800.327.ALFA (2532) www.alfaco.com Fax 914.273.3666 / 800.328.ALFA (2532)

89

REPAIR KIT FOR BIRO BAND SAWS

PARTS FOR GLOBE SLICERS

Blade Scraper (2)

(Nyleen)

Blade Scraper (2)

(Steel)

Filler Block (3)

Wheel Cleaner (4)

AlfA # DeScriptioN

BIS-KIT Repair Kit for all Biro Bandsaws Includes all of the parts pictured above

REPAIR KIT FOR BUTCHER BOY BAND SAWS

Lower Saw Guide Saw Guide

Bearing (2)

Upper Saw Guide

Blade Scraper

(2) (Steel)

AlfA # DeScriptioN

BBS-KIT Repair Kit for Models B-12, B-14 and B-16 Includes all of the parts pictured above

Filler Block (3)

End Catch

(Gauge Arm Support)

Bumpers (2) Bearing Thumb

Screw (2)

Blade Scraper

(2) (Fiber)

Wheel Cleaner (2)

PARTS FOR BUTCHER BOY BAND SAWS

BBS241D

BBSLMB

BBS220 BBS353V

BBS258

BBSUMB

BBS023

BBS973D

AlfA # oeM # DeScriptioN

BBSLMB (24) 90300 Lower Main Bearing x x x x BBSUMB (6) 90302 Upper Main Bearing x x x x BBS0120 (20) 10000 Filler Block - White Nylon x x x x BBS100 (20) 1000 Filler Block - Fiber x x x x x x x x BBS023 (23) 10023

Lower Wheel Shaft

x x x x BBS220* (24C) 90200 Lower Shaft Snap Ring x x x x BBS221V (21) 10002 Lower Saw Guide - “V” Front x x x x BBS241D (41D) 90400 Upper Shaft Seal x x x x BBS258* (6A) 10258 Upper Bearing Spacer x x x x BBS353V (53) 10074 Upper Saw Guide x x x x BBS973D* (3D) 10151 Door Pull Guide Knob x x x x

BBS0120

BBS100

fitS MoDelS

BBS221V

B

S

1

-

A

1

2

1

4

6

4

-

3

2

5

0

c

6

o

4

B

0

r A

1 4

c

o B r A

1 6

*Available while current stock lasts.

The above parts are sold by Alfa International as replacement parts for Biro and Butcher Boy Band Saws. Alfa is not affiliated with these firms.

914.273.2222 / 800.327.ALFA (2532) www.alfaco.com Fax 914.273.3666 / 800.328.ALFA (2532)

90

PARTS FOR BUTCHER BOY BAND SAWS

BBS101A

BBS353

BBS914

BBS637A

BBS2439

BBS946A

BBS761A

BBS069A

BBS785

BBSSGB

AlfA # oeM # DeScriptioN

BBS169B

BBS861B

BBS952A

BBS015A

BBS811F BBS811V

BBS574N

BBS574

BBS575N

BBS575

fitS MoDelS

B

1 2

BBS811U

B

-

1

4

6

BBS7016

S A

2 0

BBS027BBS052

1 4 3 5

BBS959

1

c

6

o

4

B

0

r A

1 4

BBSSGB (27) 90301 Saw Guide Bearing W/Neo Seal x x x x x x x x BBS027 27 Bearing Saw Guide x x x x x x x x BBS052 52 Bearing Saw Guide W/Neo Seal x x x x x x x x BBS069A* 69A Rod Liner Pin x x x BBS101A (31J) 10033 Rod and Indicator Assembly x x BBS169B* (69B) 12335 Rod Mount and Locking Pin x x x BBS015A (15A) 10304 Front Scraper Assembly

(New Style) x x x x x x x

BBS353 (53VC) 70353 Saw Guide Upper W/Plug x x x x x x x x BBS574 101574 Shaft Assembly, Upper Wheel x x x x x x x x BBS574N 101574

Shaft Assembly (Upper Wheel W/Neo Seals)

x x x x x x x x BBS575 10575 Shaft Assembly, Lower Wheel x x x x x x x x BBS575N (23) 10023

Shaft Assembly (Lower Wheel W/Neo Seals)

x x x x x x x x BBS637A (37A) 90600 Adjusting Bar Guide Knob x x x x BBS761A* (61A) 10314 Measuring Arm Spring x x x x x x x BBS785 21VC 01 20785 Saw Guide Lower W/Plug x x x x x x x BBS811F (11A) 10065 Table Roller - Flat x x x x x x BBS811U (11H) 10068 Table Roller - “U” x x x x x x BBS811V 11V Table Roller - “V” x x x x x x BBS861B* (61B) 10211 Measuring Arm Pin x x x x x x x BBS914* (39+14A) Adjusting Bar Guide 10366/10717 W/Spring Lock x x x x BBS946A* (46A) 90612 Bumper x x x x x x BBS952A 52A Bearing Thumb Screw x x x x x BBS959 (59) 10277 Wheel Scraper Spring x x x x x x x x BBS2439* (39) 10717 Blade Guard x x x BBS7016 (70) 16069 Bone Dust Pan x x x

c

o

B

r

A

1 6

*Available while current stock lasts.

The above parts are sold by Alfa International as replacement parts for Butcher Boy Machines. Alfa is not affiliated with Butcher Boy.

914.273.2222 / 800.327.ALFA (2532) www.alfaco.com Fax 914.273.3666 / 800.328.ALFA (2532)

91

PARTS FOR HOBART BAND SAWS

HOS122

HOS125-01

HOS124-01

HOS799

HOS121

HOS106

HOS113

HOS861

HOS123

HOS798

HOS447

HOS131

HOS273

HOS126

HOS119

HOS115

HOS127

5 7 0 0

HOS805

5 7 0 1

5 8 0 1

HOS806

HOS114

HOS140

6

8

6

0

1

4

fitS MoDelS

AlfA # hoBArt # DeScriptioN

HOS106 291658 Filler Block x x x x x HOS113 B12170 Blade Cleaner x x HOS114 BB-8-14 Upper and Lower Main Bearing x x x x HOS115 290803 Upper Wheel Shaft x x x x HOS119 N/A Shaft Hardware Set x x x HOS121 291650-1 Lower Guide and Carbide Plug x HOS122 290844-4 Upper Guide and Carbide Plug x HOS123

* 123886 Blade Scraper x

HOS124-01 291670-1 Lower Guide and Carbide Plug x x HOS125-01 290844-1 Upper Guide and Carbide Plug x x x x HOS126 290863 Saw Wheel (Upper and Lower) x x x x HOS127 197713 Wheel Lock Lever x x x x HOS131 A291675 Table Tension Stud x x x x HOS140 292278 Lower Wheel Shaft x x x x x HOS273 292273 Shaft Lock Pin (3/8

" x 3") x x x x HOS447 291447 Lower Cover - Gray Plastic x x x x HOS798 290798 Lower Blade Wiper Assembly x x x x x HOS799 N/A Fibre Blade Scraper Assembly x x x x x HOS805 B-290805 Grease Seal - Upper and Lower Shaft x x x x HOS806 290806 Upper Shaft Spacer x x x x HOS861 290861 Upper Door - Gray Plastic x x x x

*Available while current stock lasts.

The above parts are sold by Alfa International as replacement parts for Hobart Band Saws. Alfa is not affiliated with Hobart.

6 8 0 1

l

o

W

e r

914.273.2222 / 800.327.ALFA (2532) www.alfaco.com Fax 914.273.3666 / 800.328.ALFA (2532)

92

PARTS FOR HOBART BAND SAWS

HOS50A

HOS48A

HOS102A

HOS47

HOS112

HOS45

HOS95

HOS660

HOS137

HOS93

HOS104

HOS147

HOS128A

HOS55A

HOS399

HOS41-16

HOS43

HOS44

HOS56A

fitS MoDelS

5

6

8

6

0

1

4

AlfA # hoBArt # DeScriptioN

1

2

5

6

7

1

4

6

2

4

6

1

4

7

0

1

HOS41-16* M72364-1 Upper or Lower Saw Wheel x HOS43 M20852 Wheel Lock Lever x x x x HOS44* M20851

Lock Lever Stud x x x x x x x HOS45 M681776 Lower Door Spring Clip x x x x HOS47 P-77318 Table Stop Bumper x x x x HOS48A* P-86049 Table Stop Assembly x x x x HOS50A BB102399 Upper Pulley Wiper Assembly x x x x x x x x HOS55A 104786 Rear Wiper Assembly x x HOS56A 104349 Rear Wiper Assembly x x HOS93 A102432-2 Upper Guide Knob and Stud x x x x x HOS95 A103305 Upper Guide Mount x x x x x HOS102A B110254 Fibre Blade Scraper Assembly x x x x x HOS104* M78833-2 Switch Extension Rod (10-1/2

HOS112

123886/M71368

Wheel Cleaner x x x x x

HOS128A 120469-3 Tension Screw Assembly (7-1/2

") x

HOS137 BB-13-1 Thrust Bearing x x x x x HOS147 M78940 Switch Knob x x x HOS399 B102399 Upper Pulley Wiper Assembly x x x x x x x x HOS660 121660 Lower Guide & Cleaner Bracket Assy. x x x x x

6 8 0 1

93

*Available while current stock lasts.

The above parts are sold by Alfa International as replacement parts for Hobart Band Saws. Alfa is not affiliated with Hobart.

914.273.2222 / 800.327.ALFA (2532) www.alfaco.com Fax 914.273.3666 / 800.328.ALFA (2532)

93

HOS108

N.A. separately

PARTS FOR HOBART BAND SAWS

HOS111

HOS109

N.A. separately

HOS110

HOS117

HOS87A Kit

Note: Parts in this Kit except #HOS108

& HOS109 are also available separately.

HOS116

AlfA # hoBArt # DeScriptioN

HOS87A P77846

Worm Bracket Assembly Kit

Includes All Parts Below Bracket with Bearings, Knob, Bushing, Shaft Spacer, Worm and Shaft with Pin, Gauge Plate Spring, Worm, Groove Pin x x x x x HOS019 N/A Screw Assembly SS, Upper Cover x x x HOS138 N/A Upper Shaft and Bearing Assembly x x x HOS142 479142 Upper Wheel Retainer Ring x HOS143 479143 Wheel Bushing x HOS144* 479144 Upper Wheel Shaft x HOS191 N/A Lower Shaft Assembly x x x HOS363 292363 Tension Assembly x x x HOS413 RR-4-13 Retaining Ring x

NEW!!

HOS435 291435 Pusher Plate x x x x x x x x x x HOS501 873501 Rear Shaft Seal x HOS502 873502 Front Shaft Seal x HOS536 BB-15-36 Wheel Bearing x

NEW!!

HOS582 435958-2 Adjusting Knob x x x x HOS611* 873461-1 Rear Wheel Cover x HOS612* 873461-2 Rear Wheel Cover x HOS686* M79686 Friction Catch x HOS706* SC-067-06 Screw Set, 8 Pcs. x

NEW!! NEW!!

HOS789 290789 Table Roller x x x HOS842 290842 Upper Guide Holder x x x x HOS851 M20851 Lock Lever Stud x x x x x HOS998 274998 Upper Baffle Assembly x x

HOS019 HOS138 HOS142 HOS143

HOS706

HOS191

HOS998

HOS789

NEW!!

HOS501

HOS851

HOS842

NEW!!

HOS363

HOS582

NEW!!

HOS536 HOS611

5

0

2

1

4

2

HOS413

HOS435

fitS MoDelS

5

2

1

4

6

HOS144

HOS686

HOS612

HOS502

NEW!!

5

6

7

1

4

7

0

1

6

8

0

1

*Available while current stock lasts.

The above parts are sold by Alfa International as replacement parts for Hobart Band Saws. Alfa is not affiliated with Hobart.

914.273.2222 / 800.327.ALFA (2532) www.alfaco.com Fax 914.273.3666 / 800.328.ALFA (2532)

94

PARTS FOR HOBART BAND SAWS

HOS15V HOS26V

HOS12 HOS27

HOS28V

HOS29

HOS42W

HOS42N

HOS13 HOS31

HOS30

HOS34

HOS33

HOS32

HOS14

HOS49A

HOS37

fitS MoDelS

5

2

5

1

6

4

AlfA # hoBArt # DeScriptioN

0

1

2

1

2

4

6

1

4

6

2

1

2

4

HOS12 M71363 Filler Block (Through Hole) x x x x x x HOS13 M71368 Wheel Cleaner-Fibre x x HOS14 110253 Blade Cleaner x x x x x HOS15V M71369

Lower Saw Guide x x x HOS26V P-101929 Upper Saw Guide x x x x x HOS27 A102653

Filler Block Blind Hole-Threaded x x x x x x HOS28V M71379 Lower Saw Guide-Slot W/V x x x x x HOS29 M86340 Blade Cleaner x x x x x HOS30* M101934 Wheel Cleaner Spring x x x x x HOS31 M71368 Wheel Cleaner x x x x x x HOS32 A101924 Carbide Backup Stud x x x x x HOS33 M101926 Backup Spring x x x x x HOS34* SC-49-22 Back Plug-Nylon x x x x x HOS37* A-113184 Guide - Lower & Cleaning Bracket x x x x HOS42N 122922 Shaft Lock Pin (5/16 HOS42W M77813-1 Shaft Lock Pin (3/8

" x 2-1/2") x x x x

" x 2-1/2") x x

HOS49A 101254 Blade Cleaner + Spring Assembly x x x x x

5 6 1 4

*Available while current stock lasts.

The above parts are sold by Alfa International as replacement parts for Hobart Band Saws. Alfa is not affiliated with Hobart.

914.273.2222 / 800.327.ALFA (2532) www.alfaco.com Fax 914.273.3666 / 800.328.ALFA (2532)

95

Leader

(Single Bevel)

PARTS FOR HOBART FOOD CUTTERS

HFC-371

HFC-311

HFC-312

HFC-831

HFC-398

HM2-972

H-098

HFC-313

HOB 84181D

HOB 84142/5

Follower

(Double Bevel)

HFC-642

HFC-934

BK/SC F.C.

Note: All Blades are solid 420 Series Stainless Steel

HOB 84141

fitS MoDelS

ALFA # HOBART # DESCRIPTION

8 1 4 2

HFC-311 71311 Locking Collar - Threaded x x x x x x x x x x x x HFC-312 71312 Bushing-Knife Retaining x x x x x x x x x x x x HFC-313 71313 Bushing-Knife Retaining HFC-371 77371 Knob-Fluted HFC-398 78398 Insert for Knife Shaft x x x H-098 877711-1481 Toggle Switch x x x x x x x x x HFC-642 116642 Stainless Steel Comb-Fits 14 HFC-831

87711-83-1

Drum Switch x x x HFC-934 123934 Stainless Steel Comb-Fits 18 HM2-972

108197-2/291702

Power Hub Thumb Screw (1-1/2" Shaft)

" Bowl only x x

" Bowl only x x x x x x

HOB 84141 17908/17909 Set of 2 Open End Stainless Steel Knives (14

" Bowl) x x HOB 84142/5 71309/71310 Set of 2 Closed End Stainless Steel Knives (14

" Bowl) x x x HOB 84181D 77372/77373 Set of 2 Closed End Stainless Steel Knives (18

" Bowl) x x x x x

8

1

4

1

8

1

4

1

5

6

5

4

1

4

1

2

4

1

4

8

5

1

8

4

1

8

1

5

D

x x x x x x x x x x x x x x x x x x x x x x x x

All Models with Power Hub

8

4

1

8

6

6 D

AlSo AVAilABle for Berkel AND SchArfeN fooD cutterS

BK/SC F.C. CU-0036 / CU-0038 Set of 2 Closed End Stainless Steel Knives Berkel 1810 / 1850 (18” Bowl)

PARTS FOR HOBART CUTTER MIXERS

HCM-296

HCM-956 (Threaded)

fitS MoDelS hcM hcM AlfA # hoBArt# DeScriptioN 300 450

HCM-294 274661 Stainless Steel Knife (each) x HCM-295 274662 Stainless Steel Knife (each) x HCM-296 122296 Top Knob (Non-Threaded) x x HCM-956 122296 Top Knob (Threaded) x x

The above parts are sold by Alfa International as replacement parts for Hobart and Berkel. Alfa is not affiliated with Hobart or Berkel.

914.273.2222 / 800.327.ALFA (2532) www.alfaco.com Fax 914.273.3666 / 800.328.ALFA (2532)

96

HCM-294

HCM-295

PARTS FOR HOBART FOOD CUTTERS

HFC-503

HFC-482

HFC-382

HFC-321

HFC-012

HFC-752

HFC-398

HFC-310

HFC-025

HFC-115

HFC-208

HFC-522

HFC-814

HFC-374

HFC-168

HFC-704

fitS MoDelS

8

4

1

8

1

5

D

ALFA # HOBART # DESCRIPTION

8

1

8

4 5

8

1

5

4

8

1

6

4 5

HFC-012* 00-087711-201-2 Micro Switch x x HFC-025 PG-3-27 Locking Handle Roll Pins (5 per pkg.) x x x x x x x x HFC-115 67500-115 “O” Ring x x HFC-168 117168 Interlock Bolt x x x x x x x x HFC-208 WL-012-08 Lockwasher x x HFC-310* SL-003-10 Loading Spring x x x x x x HFC-321 BV-013-21 Belt x x HFC-374 77374 Washer x x x x x x x x HFC-382* 87713-28-2 Relay - 2 Pole (115V) x x HFC-398 78398 Insert Knife Shaft x x x HFC-482* 00-087711-148-2 On/Off Switch x x x x x HFC-503 117503 “V” Belt x x HFC-522 BB-15-22 Rear Knife Shaft Ball Bearing x x x HFC-704 291704 Round Belt x x HFC-752 BB-7-52 Attachment Drive Bearing x x x HFC-814 00-116814 Locking Handle x x x x x x x x

*Available while current stock lasts.

8 4 1 8 6

The above parts are sold by Alfa International as replacement parts for Hobart Food Cutters. Alfa is not affiliated with Hobart.

914.273.2222 / 800.327.ALFA (2532) www.alfaco.com Fax 914.273.3666 / 800.328.ALFA (2532)

97

Alfa V71 User Manual

Specifications and Main Features

Frequently Asked Questions

User Manual