Alexander HOT Pink User Manual

Hot. Pink. Drive.

The sound of all your neon nights on the Sunset
Strip, now in a convenient and easy-to-swallow
form.

Controls:

Level: Controls the output level of the pedal.

Drive: Adjusts the gain and distortion of the pedal.

Bass / Treble: Passive two-band tone stack, voiced

like a British amplier.

Contour: Active midrange lter, adds mids clockwise

and scoops mids counter-clockwise.

Bypass Switching:

Hot Pink features true-bypass switching using a soft-touch

bypass footswitch. Hot Pink will power on in either by­pass mode or effect mode (useful if you are using the
pedal with a remote bypass switching system.) Hold the
footswitch at boot to toggle between bypass and effect
startup modes. The pedal remembers your settings when
the power is removed.

Great Tones, Doing Good:

Hot Pink 2015 production is limited to only thirty pieces

worldwide. Alexander Pedals will donate a portion of the
proceeds from each Hot Pink to The Pink Fund, providing
short-term aid to breast cancer patients. For more infor­mation please visit thepinkfund.org.

Power Supply:

Hot Pink requires a 9-18V DC power supply
with a 2.1mm pin, center negative. The pedal
will have more headroom and output volume if
powered by a higher voltage supply. Hot Pink
does not use a battery. The pedal should work

ne on a multi-pedal “daisy chain” connector,

but if you encounter excessive noise or hum, try
a separate power supply. The pedal requires
approximately 18mA.

GREAT TONES. DOING GOOD.

404 E. Main St, Garner, NC 27529 [phone] alexanderpedals.com