Alertegps G100 User Manual

100

Thank you for choosing the GPS PREVENT G100 speed camera detection system, the ideal
partner to guarantee full serenity on the road!

The G100 features sound alerts: it warns you as you approach a control zone – fixed, mobile, red
light – or even a dangerous zone (dangerous curves, intersection or frequent accidents) .

The G100 speed detection system is a driving assistant: it works with the well known satellite
network Global Positioning System (GPS). It allows you to know the speed of your vehicle, and
the distance between your vehicle and the control zone. It also features a speed limiter
function, and an internal memory to save your own points of interest.

Please read this manual carefully so that you can feel familiar with all functionalities of the G100.

Have a good trip!

CONTENTS

DESCRIPTION

PAGE 2 PAGE 7

INSTALLING

THE G100

PAGE 3

FEATURES

PAGE 4 - 5

UPDATE

PAGE 6

GENERAL NOTICES

AND WARNINGS

Description & Features

2

2

1

Digital Screen

- the speed of your vehicle

- the speed limit in a control zone

- the distance between your vehicle and the control or danger zone

- the moment when the vehicle is passing near the zone

2

VOL ON / Brightness Button

[ Short pressure ] : Use to turn the volume on
[ Long pressure ] : Use to adjust display brightness

3

Speed Limiter Button

6

[ Short pressure ] : Use to turn the speed limiter on
[ Long pressure ] : Use to turn the speed limiter off

1

SPEED OF YOUR VEHICLE

The G100 indicates the exact speed of
your vehicle, calculated by the GPS
system.

Speed = 92Mph

3

4

5

SOUND ALERT OVERSPEED BEEP OTHER...

As you approach a control
zone, the G100 will warn you

with one or repeated sound
alerts, depending on the type of
control.

4

VOL OFF / Save Button

[ Short pressure ] : Use to turn the volume off
[ Long pressure ] : Use to save a user’s point of interest

5

USB / Power Connector

Use to connect the G100 to a PC or to connect it to the cigar-plug in a car.

6

External Antenna Connector (optional)

As you approach a fixed speed
camera, the G100 will emit
“beeps” if you are driving over

the speed limit.

As you approach a control or a danger
zone, in addition to the sound alerts, the
display of the G100 shows different
indications.

Frequency

Speed limit

Installing the G100

1

Remove the protection from the magnet

2

Fix the magnet on the dashboard of your vehicle, in a
horizontal position.

3

Place the G100 on the magnet when you want to use
it in your vehicle

4

Connect the device to the cigar-plug with the power
cable

3

Your vehicle may have an athermic windscreen which
may affect the satellite connection. In that case, you
will need to use an optional external antenna.

Installing the G100 with an external antenna:

- fix the external antenna on the roof of your vehicle and
make sure to place the cable inside the cabin of the vehicle.

- connect the antenna to the external antenna connector of
the G100.

Important...

- in order to work properly, the device must be fixed in a horizontal position and
as close as possible to the windscreen

- remove the device from the magnet before you leave your vehicle to avoid
degradations and thefts

- climatic conditions may influence the satellite connection.