Alera Lighting QST Silver User Manual

Quest silver or white cross baffle tiD
Step 1 Loosen screws on the socket pan at each end and in the center of an 4' xture. Slide clip under socket pan and tighten screws.
Step 2
Slip one side of the louver onto the clips.
Technical Installation Data
Step 3
Attach safety tether to upper housing and to side of the louver.
Step 4
Bring louver across the xture and snap into clips on the other side.
Page 1/1 Rev. 02/13/13 Curves / QUEST SILVER OR WHITE CROSS BAFFLE
© 2013 Ale ra Lighting, a division of Hubbell Lighting , Inc. Because of continuing product improvement pro grams, Alera Lighting reserves the right to ch ange specifications without notice. 701 Millennium Blvd. Greenville, SC 29607 / Tel 864.678.1000 / Website www.aleralighting.com
Loading...