Alera Lighting NVS - Arch Sensors User Manual

R

A

U

L

T

S

C

E

E

N

T

I

S

H

O

C

R

R

S

A

Installed Architectural Sensors Technical Installation Data

NeViS

sections

Bottom View

single mounting

12"

Solid Bottom

End Cap Options

2"

2"

5/16"

Connection SectionCross Section

Sensor

Location

Sensor

Location

Perforated Bottom

D

A

Sensor

Location

row mounting

data chart

Nominal

Length

4' 17 lbs . 17 lbs . 19 lbs. 47 ¼" 48" 192 ⅝" 48 ⅝"

8' 28 lbs. 28 lbs. 31 lbs . 95 ¼" 96" 384 ⅝" 96 ⅝"

Note: Suspension data is computed using the standard aircraft cable assembly. The use of rigid stems will yield dierent data. Please consult factory for stem data.

A

B

Approx. Weight

1-lamp 2-lamp 3-lamp

4', 8'

C

B B

Sensor

Location

4', 8'

A B C D

Limitations exist for rows containing Installed Architectural Sensors; contact factory for assistance.

Page 1/2 Rev. 08/28/12 curves / NVS architectural SeNSorS tiD

See technical downloads for appropriate sensor manufacturer detail.

© 2012 Ale ra Lighting, a division of Hubbell Lighting, Inc. Because of continuin g product improvement programs , Alera Lighting reserves the ri ght to change specifications
without notice. 701 Millennium B lvd. Greenville, SC 2 9607 / Tel [phone] / Website www.aleralighting.com

Connection Instructions:

1. Install rst xture of rows with two hangers.

2. Slide inner die cast plates together

3. Secure xture joints with two bolts and nuts and
attach hanger at opposite end.

4. Repeat steps 2 and 3 until row is complete.

5. At each end of the row, attach and align endcap with
two screws.

R

A

U

L

T

S

C

E

E

N

T

I

S

H

O

C

R

R

S

A

Installed Architectural Sensors Technical Installation Data

NeViS

Suspension Instructions:

1. Set bottom nut to desired xture height.

2. Adjust upper nut for a minimum of 3/8" between
upper and lower nuts.

3. Slide cable hanger into hanger slot.

4. Secure and tighten upper nut.

Page 2/2 Rev. 08/28/12 curves / NVS architectural SeNSorS tiD

© 2012 Ale ra Lighting, a division of Hubbell Lighting, Inc. Because of continuin g product improvement programs , Alera Lighting reserves the ri ght to change specifications
without notice. 701 Millennium B lvd. Greenville, SC 2 9607 / Tel [phone] / Website www.aleralighting.com