Alera Lighting NPLS - Arch Sensors User Manual

R

A

U

L

T

S

C

E

E

N

T

I

S

H

O

C

R

R

S

A

Installed Architectural Sensors Technical Installation Data

Nevis Plus liso

sections

Bottom View

single mounting

12"

Solid Bottom

End Cap Options

2"

2"

5/16"

Connection SectionCross Section

Sensor

Location

Sensor

Location

Perforated Bottom

D

A

Sensor

Location

row mounting

data chart

Note: Suspension data is computed using the standard aircraft cable assembly. The use of rigid stems will yield dierent data.
Please consult factory for stem data.

4', 8'

C

A

B

B B

4', 8'

Nominal

Length

Approx. Weight

1-lamp 2-lamp

A B C D

4' 17 lbs . 17 lbs . 47 ¼" 48" 192 ⅝" 48 ⅝"

8' 28 lbs. 28 lbs. 95 ¼" 96" 384 ⅝" 96 ⅝"

Sensor

Location

Limitations exist for rows containing Installed Architectural Sensors; contact factory for assistance.

Page 1/2 Rev. 08/28/12 curves / NPLS ARCHITECTURAL SENSORS TID

See technical downloads for appropriate sensor manufacturer detail.

© 2012 Ale ra Lighting, a division of Hubbell Lighting, Inc. Because of continuin g product improvement programs , Alera Lighting reserves the ri ght to change specifications
without notice. 701 Millennium B lvd. Greenville, SC 2 9607 / Tel [phone] / Website www.aleralighting.com

R

A

U

L

T

S

C

E

E

N

T

I

S

H

O

C

R

R

S

A

Installed Architectural Sensors Technical Installation Data

Nevis Plus liso

Connection Instructions:

1. Install rst xture of row with two hangers.

2. Slide inner die cast plates together.

3. Secure and adjust xture joints with two bolts and nuts and
attach hanger at opposite end.

4. Repeat steps 2 and 3 until row is complete.

5. At the end of the row, attach and align endcap with two screws.

Suspension Instructions:

1. Set bottom nut to desired xture height.

2. Adjust upper nut for a minimum of 3/8" between
upper and lower nuts.

3. Slide cable hanger into hanger slot.

4. Secure and tighten upper nut.

Center upper reector and clip directly onto lamps.

Page 2/2 Rev. 08/28/12 curves / NPLS ARCHITECTURAL SENSORS TID

© 2012 Ale ra Lighting, a division of Hubbell Lighting, Inc. Because of continuin g product improvement programs , Alera Lighting reserves the ri ght to change specifications
without notice. 701 Millennium B lvd. Greenville, SC 2 9607 / Tel [phone] / Website www.aleralighting.com