Alera Lighting APCS CCM User Manual
A+CLASS™ CCM MOUNTING/INSTALLATION GUIDE
Technical Installation Data
Use in conjunction with Quick Start Guide and Line Voltage
Wiring Diagram provided with the CCM and included on the
A+Class™ SD Card.
CCM Housing must be located in plenum, electrical closet, or other secure
location. Temperature rating is 0ºC to 40ºC.
Backplate remains attached.
(Refer to gure 1)
3
Housing
fasteners (by others)
1. Use a /" nut driver to remove the four backplate retaining nuts.
2. Remove the whole backplate / circuit board assembly from the
enclosure. Note: Do not remove the circuit boards from the
backplate. (see gure 1).
gure 1
3. Mount the box to the surface.
4. Install the whole backplate / circuit board assembly into the
enclosure.
5. Use a /" nut driver to attach the four backplate retaining nuts
into place.
Circuit Board
fasteners (nuts provided)
6. Wire the unit per instructions. See wiring diagram on back.
(See reverse side for line voltage wiring diagram examples)
PRECAUTION: Installation must be performed by qualified professional electrician in accordance with all local,
state and national codes.
Page 1 /2 Rev. 07/16/13 72-00 432 Integrated Controls / A+CLASS™ CCM MOUNTING/INSTALLATION GUIDE TID
© 2013 Ale ra Lighting, a division of Hubbell Lighting , Inc. Because of continuing product improvement pro grams, Alera Lighting reserves the right to ch ange specifications
without notice. 701 Millennium Blvd. Greenville, SC 29607 / Tel 864.678.1000 / Website ww w.aleralighting.com
US Patent #8,436,542
A+CLASS™ CCM MOUNTING/INSTALLATION GUIDE
Technical Installation Data
A+CLASS™ 4 ROWS, WBD Classroom Control Module (CCM) Wiring Diagrams: Line Voltage
CCM
GROUND
NEUTRAL
277VAC
120VAC
POWER TO CONTROLLER
NEUTRAL
LINE
120\277VAC
INPUT
LIGHTING
BATTERY TYPE BR2032
INSERT
BACK
INSERT SD CARD
CIRCUIT
GENERAL
NEUTRAL
A/V
GENERAL
NEUTRAL
A/V
GENERAL
NEUTRAL
A/V
GENERAL
NEUTRAL
SELECT
A/V
WHT BRD
NEUTRAL
WHITE BOARDROW 4ROW 3ROW 2ROW 1
Main Power Feed
120V
Connect line in to
appropriate voltage
(120 V )
Add jumpers (120V shown)
GROUND
NEUTRAL
277VAC
120VAC
POWER TO CONTROLLER
NEUTRAL
LINE
120\277VAC
LIGHTING
CIRCUIT
INPUT
GENERAL
NEUTRAL
A/V
GENERAL
NEUTRAL
A/V
GENERAL
NEUTRAL
A/V
GENERAL
NEUTRAL
A/V
WHT BRD
NEUTRAL
WHITE BOARDROW 4ROW 3ROW 2ROW 1
For additional A+Class™ wiring diagrams, see www.aleralighting.com
277V
Connect line in to
appropriate voltage
(277V)
Add jumpers
GROUND
NEUTRAL
277VAC
120VAC
POWER TO CONTROLLER
NEUTRAL
LINE
120\277VAC
LIGHTING
CIRCUIT
INPUT
GENERAL
NEUTRAL
1
To dual circuit
A+CLASS™
Lighting Row 1
To dual circuit
A+CLASS™
Lighting Row 2
To dual circuit
A+CLASS™
Lighting Row 3
To dual circuit
A+CLASS™
Lighting Row 4
To A+CLASS™
Whiteboard
Lighting
(277V s hown)
PRECAUTION: Installation must be performed by qualified professional electrician in accordance with all local,
state and national codes.
Page 2 /2 Rev. 07/16/13 72-00432 INTEGRATED CONTROLS / A+CLASS™ CCM MOUNTING/INSTALLATION GUIDE TID
© 2013 Ale ra Lighting, a division of Hubbell Lighting , Inc. Because of continuing product improvement pro grams, Alera Lighting reserves the right to ch ange specifications
without notice. 701 Millennium Blvd. Greenville, SC 29607 / Tel 864.678.1000 / Website ww w.aleralighting.com
US Patent #8,436,542
Loading...