Alera Lighting ALS User Manual
TECHNICAL INSTALLATION DATA
ECTIONS
S
1
/2″
9
CROSS SECTION CONNECTION SECTION
ALS, ALLEGRO DIRECT/INDIRECT
23/4″
IEW
V
OTTOM
B
SINGLE MOUNTING
ROW MOUNTING
8′
D
A
4, 8, 12 ft.
C
DATA CHART
Nominal Approx. Weight ABCD
Length 1-lamp 2-lamp 3-lamp
Note: Suspension data is computed using the standard aircraft cable assembly. The use of rigid stems will yield different data. Please consult
factory for stem data.
A
4, 8, 12 ft.
4′ 12 lbs. 12 lbs. 12 lbs. 471⁄2″ 48″ 1921⁄4″ 481⁄4″
8′ 21 lbs. 21 lbs. 24 lbs. 951⁄2″ 96″ 3841⁄4″ 961⁄4″
12′ 30 lbs. 33 lbs. 36 lbs. 1431⁄2″ 144″ 5761⁄4″ 1441⁄4″
Greenville SC 29607 • (864) 678-1000
Subject to change without notice.
We are architectural fluorescent lighting
BB
A
701 Millennium Blvd
www.aleralighting.com
B
B
CD
15-1.1
C
TECHNICAL INSTALLATION DATA
g
SCREW 10-32 X 1/2″
PART #136710
NUT 10-32
PART #112392
ONNECTIONS
C
IXTURE
F
ALS, ALLEGRO DIRECT/INDIRECT
Diecast Coupler
Connection Instructions:
1. Install first fixture of row with two hangers.
2. Place bolts through openings in internal end cap.
3. Slide diecast coupler over end of fixture with bolts.
Screw bolts through threaded holes in coupler to
retain coupler.
4. Slide other fixture onto bolts and attach nuts.
5. Repeat steps 2, 3 and 4 until row is complete.
6. At the end of the row attach diecast end caps with
appropriate nuts.
Suspension Instructions:
1. Set bottom nut to desired fixture height.
2. Slide cable hanger into hanger slot.
3. Secure and tighten upper nut.
4. Push plunger down to adjust cable to
proper suspension. Cut excess cable.
5. For fine-tuning of fixture balance, slide
knuckle across yoke. Twist cable
gripper to lock in place.
TTACHMENT
A
USPENSION
S
Cable
Gripper
Plunger
Yoke
Nut
15-1.1
C
701 Millennium Blvd
Greenville SC 29607 • (864) 678-1000
www.aleralighting.com
We are architectural fluorescent lightin
AL 09/07
Subject to change without notice.
Loading...