Alemite 7350 Service Manual
Hand Crank Reel
7350
SER 7350
Revision (2-05)
670875
Copyright 2005 by Alemite, LLC
This document contains confi dential information that is the property of Alemite, LLC
and is not to be copied, used, or disclosed to others without express written permission.
Alemite, LLC
Johnson City, TN 37601
www.alemite.com
Alemite, LLC
Revision (2-05)
2
SER 7350
IMPORTANT
READ THIS MANUAL CAREFULLY BEFORE INSTALLING,
OPERATING, OR SERVICING THIS EQUIPMENT
Fig. 1
Ensure that the reel has been properly installed before connecting supply line (see installation instructions).
Bleed fl uid/gas pressure from system before servicing reel.
Before connecting reel to supply line ensure that supply line pressure does not exceed maximum rated working pressure of
reel.
Do not play pranks on other personnel. Even low pressure is very dangerous and can cause irrepairable damage or death.
Do not wear loose fi tting clothing while operating reel.
Be aware of other personnel in work area.
Be aware of other machinery in work area.
If a leak occurs in the hose or reel, remove supply line pressure immediately.
If the reel is power driven check for loose, frayed, and/or broken wires before operating.
Treat and respect a hose reel as any other piece of machinery, observing all common safety practices.
Personnel injury and/or equipment damage may result if proper safety precautions are not observed.
11.38”
(28.9 cm)
9“
(22.9 cm)
12.69”
(32.2 cm)
17.75”
(45.1 cm)
20.25”
(51.4 cm)
19”
(48.3 cm)
6.63”
(16.8 cm)
6”
(15.2 cm)
1/2 NPTF (f )
9.75”
(24.8 cm)
11”
(27.9 cm)
11.38”
(28.9 cm)
9“
(22.9 cm)
12.69”
(32.2 cm)
17.75”
(45.1 cm)
20.25”
(51.4 cm)
Loading...