Alemite 4035 Service Manual
Service Guide
Lever-Operated Oil Gun
Description
This model oil gun is designed with Buna-N (Nitrile)
seals to dispense oil.
The gun delivers slightly more than 1 fluid ounce
(30.8 cm
[2-strokes per cycle - one upward and one downward].
Operation
Fill the Gun
1. Unscrew Cylinder (13) from Head Assembly (3). See
2. Pull Rod and Handle Assembly (10) fully to the back
3
) of product in seven cycles
Figure 2.
of the Cylinder and allow it to latch.
4035
3. Fill the Cylinder with fluid.
4. Screw the Head Assembly onto the Cylinder.
• Tighten the Head Assembly securely.
5. Release the Rod and Handle Assembly from Latch (11).
6. Push the Rod and Handle Assembly into the Cylinder
until it seats on the Latch.
Specifications
Reservoir Capacity Delivery/Cycle
Fluid Ounces Liter Fluid Ounce
26 0.77 0.15 4.4 1800 124
Ta ble 1 Lever-Operated Oil Gun Specifications
cm
3
Maximum
Operating Pressure
psi Bars
Figure 1 Lever-Operated Oil Gun Model 4035
Alemite LLC
167 Roweland Drive, Johnson City, Tennessee 37601
This document contains confidential information that is the property of Alemite Corporation
670733 and is not to be copied, used, or disclosed to others without express written permission. Revision (9-09)
www.alemite.com
Copyright © 2009 by Alemite LLC
SER 4035
SER 4035 Lever-Operated Oil Gun
#AVITYIN
0ACKING
POINTSFORWARD
/2ING
!PPLY
4HREAD3EALANT
(ERE
!PPLY
4HREAD3EALANT
(ERE
Figure 2 Lever-Operated Oil Gun - Exploded View
Revision (9-09) 2 Alemite Corporation
Loading...