Alctron RS19-6U User Manual [ru]

RS19 STUDIO RACK

RS19-4U/6U/8U is a studio rack which is suitable for 19’’ equipment. Its alum tube combination with 19’’ hole
rack strips which make the construction more sturdy and stable. Insert the thumbscrew into thumbscrew holes
to lock the devices on the rack. According to device’s height, you can move the device up and down flexible,
arranging the devices in one line, also featuring better diffusion. One rack can arrange 4/6/8 devices. When at
stage performance, EVA reduces the thrill in a way.

A.Rack
B.Support bar

C

D

E

C.Locking thumbscrew X4
D.Locking thumbscrew X16
E.Hexagon wrench

F

178mm

A

Support bar

Put support bar(B) into related thumbscrew hole, use
locking thumbscrew(C) to lock RS19.

5

Device ear hole
aim to the cage
nuts position

Put the 19’’ device into rack and device ear hole aim to
the cage nuts position. If device’s hole has a little
difference with cage nuts position, please adjust the
cage nuts position until holes aim to each other.

B

Unfolded the studio rack(A).

Cage nuts

According to your 19’’ devices height, use hexagon
wrench(E) to position rack cage nuts in relative height.

6

Locking thumbscrew D

Via device ear hole and cage nuts, using hexagon
wrench(E) to lock locking thumbscrew (D) .

RS19-6U/8U follow the same installation instruction.

Angle adjustable function

Loosen the locking thumbscrew you can adjust the angle 65°，75°，85°(many other adjustable angles) allows
you to set devices in a better performance angle.

RS19-4U

Length*width*height:
Usable height F:
Net weight:
Material:

RS19-6U

Length*width*height:
Usable height:
Net weight:
Material:

RS19-8U

Length*width*height:
Usable height:
Net weight:
Material:

511mm*334mm*247mm
178mm
2500g
alum

511mm*334mm*337mm
268mm
2650g
alum

511mm*334mm*426mm
358mm
2900g
alum