- 1 -
ASSEMBLY INSTRUCTIONS
Description : CHAIR WITH WOOD SEAT
Dimension : W.17”1/2xD.20”xH.36”
Cube Size : 37.7”x18.8”x9” NW: 28.6 LBS
GW: 33 LBS
CHAIR WITH WOOD SEAT
- 2 -
BEFORE ASSEMBLY
NO Description
Qty
Sketch
NO Description
Qty
Sketch
A
Chair back
1
B Wood Seat
1
C
Front frame
1
D-L
Side
Rail
1
E
Side
stretcher
(L-R)
2
D-R
1
Thank you for purchasing this quality product. This product has been designed for easy assembly and constructed for
durability. Please take the time to read and follow the assembly instructions carefully.
Be sure to check all packing material carefully for small parts which may have come loose inside the carton during shipment.
Please separate, identify, and count all parts and metal hardware. Compare with part list to be sure all parts are present.
If hardware is missing or you have difficulty assembling this product, please call for us.
IMPORTANT NOTE:
- Place all wooden parts on a clean and smooth surface such as a rug or carpet to avoid the parts from being
scratched.
- Remove all wrapping material, including staples & packing straps before you start to assemble.
- DO NOT tighten all screws and bolts until completely assembled.
- Keep all hardware parts out of reach of children.
ASSEMBLY TOOLS
REQUIRED
NOT
INCLUDED
PART LIST
When unpacking, please be careful not to discard any parts with the packaging. Before continuing, please make
sure you have the following parts:
CHAIR WITH WOOD SEAT
- 3 -
HARDWARE LIST
NO Description
Qty
Sketch
NO Description
Qty
Sketch
1
Bolt
(M6x50mm)
6
2
Flat Washer
(ɸ6.5x13mm)
4
3
Lock Washer
(ɸ6.5x9mm)
4
4
Curve
Washer
2
5
Allen
Key
(4mm)
1
6
Short Screw
(M4x30mm)
10
A
When unpacking, please be careful not to discard any parts with the packaging. Before continuing, please make
sure you have all of the following hardware:
STEP 1
Attach Side Rail (D-L) and (D-R) to the Back (A) with Bolts (1), and Washers (2) and (3). Tighten with the Allen
Key (5)
Note: DO NOT fully tighten any of the bolts, until the chair is assembled, then put on a flat level surface
to make sure the chair is level and then tighten the bolts.
CHAIR WITH WOOD SEAT
- 4 -
STEP 2
x6
Attach Front frame (C) to Side Rail (from Step 1) with bolts (1) and Curve Washers (4). Tighten with the Allen
Key (5). Place side stretchers (E) between front and back legs use the screw driver to tighten the screws (6).
Note: DO NOT tighten any of the bolts, until Place side stretcher (E) between front and back legs the chair is assembled, then
tighten the bolts and the screws.
STEP 3
Attach the Seat (B) to top of the seat frame (from Step 2) by using Screws (6). Tighten with a screw driver.
CHAIR WITH WOOD SEAT
Loading...