ASSEMBLY INSTRUCTIONS
ATTENTION:
1. Please read these instructions carefully before assembly.
2. Aluminum is soft metal over tighten may strip thread or break the part.
3. DO NOT use power tools.
Assembly steps:
1. Turn the table top(A) upside down on the soft clean surface. Loosely attach the legs(C) to the table
top using short bolts(D), big flat washers(E), lock washers(H) and PVC covers(I). Tighten the
bolts at this time. Leave enough play for assembly those table plates.
2. Loosely attach the center plate(B) to the legs. Note that the recessed end of plate goes on the leg
last at each corner. Secure using long bolts(F), small flat washers(G), lock washers (H)and PVC covers(I).
3. Tighten all the bolts and nuts completely. DO NOT over-tighten.
4. Turn the table onto its legs and put glass top on the table top. Use the adjuster feet to level the
tables.
Warning : please not using acid or alkaline washing liquid to clean the product.
11
C
A
Parts list Parts picture Description
A
Table top
33
D
H
E
I
22
B
Q'ty
1
Parts list Parts picture Description
D
E
Short bolt
Big flat washer
I
F
H
G
Q'ty
4
4
B
C
Center plate
Table leg
F
1
G
H
4
I
J
Long bolt
Small flat washer
Lock washer
PVC cover
Wrench
4
4
8
8
1
Loading...