Page 1
CARE AND MAINTENANCE
This item should be assembled on a soft surface to prevent scratching the finish during
Part List and Hardware List
Product Dimensions:
88 W X18.6 DX27.75 H
H1
12X
Spring washer
Always use felt pads under all articles to prevent discoloration or softening of the
lacquer. Plastic and rubber bases on items can discolor wood. Wipe up spills
immediately and avoid common hazards such as hot dishes, harsh solvents and
abrasives. Cleaning should be done with a soft lint free cotton cloth dampened with
water or furniture polish. On highly used surfaces we recommend applying a quality
paste wax which should be used on a regular basis to provide additional protection from
scratches and spills. How often you apply the wax depends on how much wear the
furniture receives.
NOTICE
* Please make sure that you have all parts indicated before you begin assembly of this
item
*
assembly
* This item may require periodic tightening
PIECE QUANTITY
A 1X
B 4X
C 1X
H2 12X
H3 1X
DESCRIPTION PICTURE
Trunk
Leg
Metal shelf
Nut
Spanner
18.
"
"
"
Page 2
PREPARATION
Before beginning assembly of product, make sure all parts are present. Compare parts with package contents list
Put the trunk (A) on the leg (B) and use spanner to tighten spring washer and nut
and hardware contents list.
If any part is missing or damaged, do not attempt to assemble the product.
Estimated Assembly Time: 10 minutes.
Tools Required for Assembly (included): Spanner
Step 1
Assemble the leg(B) with metal shelf (C ) with spring washer and nut and tighten by spanner
Step 2
.
Loading...