ASSEMBLY INSTRUCTIONS
Description
(Legs)
NW
: 83.6 LBS
NW
: 26.4
LBS
: SQUARE DINING TABLE 54”x54”x30” WITH 18" BUTTERFLY LEAF :
Dimension
Cube size
(Top)
54"Wx36"/54"Dx30"H
: 56.2”x38”x6.4”
GW : 92.4 LBS
Cube Size
: 30.6”x13.7”x3.7”
GW :28.6 LBS
SQUARE DINING TABLE 54”x54”x30” WITH 18" BUTTERFLY LEAF
- 1 -
BEFORE ASSEMBLY
Thank you for purchasing this quality product. This product has been designed for easy assembly and constructed for durability.
Please take the time to read and follow the assembly instructions carefully.
Be sure to check all packing material carefully for small parts, which may have come loose inside the carton during shipment. Please
separate, identify, and count all parts and metal hardware. Compare with part list to be sure all parts are present.
IMPORTANT NOTE:
- Place all wooden parts on a clean and smooth surface such as a rug or carpet to avoid the parts from being scratched.
- Remove all wrapping material, including staples & packing straps before you start to assemble.
- DO NOT tighten all screws, bolts until all completely assembled.
- Keep all hardware parts out of reach of children
PART LIST
When unpacking, please carefully not to discard any parts with the packaging. Before continuing, please make sure you have all of
the following parts:
NO Description Qty Sketch NO Description Qty Sketch
A Top 1 B Leg 4
HARDWARE LIST
When unpacking, please carefully not to discard any parts with the packaging. Before continuing, please make sure you have all of
the following hardware:
NO Description Qty Sketch NO Description Qty Sketch
Lock washer
( Φ8.5xΦ13mm)
Allen key
(4mm)
8
1
1
(M8x70mm)
Flat washer
3
( Φ8.5xΦ19mm)
bolt
8 2
8 4
SQUARE DINING TABLE 54”x54”x30” WITH 18" BUTTERFLY LEAF
- 2 -
STEP 1
Place legs (B) in position as shown below. Use bolts (1) and washers (2),(3) to attach legs, tighten with the Allen key
(4).
B
STEP 2
Unlatch 2 end pieces of table top by the latches underneath table top. Pull the 2 ends of the
table top apart.
x2
SQUARE DINING TABLE 54”x54”x30” WITH 18" BUTTERFLY LEAF
- 3 -
STEP 3
Unfold the butterfly leaf with the apron at both ends straightened up as shown on the Step 3.
Place flattened butterfly leaf at the center of the table. Then push two end pieces inward
making sure all pins & holes aligned. Latch them together by the 4 latches underneath table top
SQUARE DINING TABLE 54”x54”x30” WITH 18" BUTTERFLY LEAF
- 4 -
Loading...