Caution : You must re ad this before you proceed
ARMLESS SOFA
Label P
A Backrest 1
B Seat Cushion 1
C Chaise Seat Frame 1
icture Description QTY
D Back Cushion 1
Page 1 OF 8
E Leg 4
Before
Label P
①
②
③
④
⑤
⑥
⑦
icture Description QTY
Bolt(M8*60MM) 3
Bolt(M8*20MM) 2
Washer 4
Allen Key 1
Washer Ring 4
Connecting Piece 1
Gasket 7
Beginning
Assembly:
Page 2 OF 8
Step 1
OVERVIEW
Back Cushion(D)
Chaise Seat Frame (C)
Backrest(A)
Seat Cushion(B)
Leg (E)
FRONT FACING
This Sofa has multiple parts and may require up to 30 minutes to assemble. To give
you an overview of the Sofa parts, the above picture is to help you put the various
Sofa parts into perspective. Please read through the instructions to familiarise
yourself with the parts and steps before assembly.
Chaise Seat Frame (C)
Backrest(A)
Uncover the non-woven Fabric and remove Backrest(A),Hardware Package from
Chaise Seat Frame(C) as shown.
Page 3 OF 8
Step 3
Step 2
Chaise Seat Frame(C)
Backrest(A)
Step2.1 Position Backrest(A) to Chaise Seat Frame(C) as Shown.
Step2.2 Attach Chaise Seat Frame(C) to the Backrest(A) using Bolt(①) , Washer
Ring(⑤) , Washer(③) with Allen Key(④).
Chaise Seat Frame(C)
Attach Connecting Piece(⑥) to Chaise Seat Frame(C) using Bolt(②) , Washer
Ring(⑤) , Washer(③) with Allen Key(④).
Page 4 OF 8
Step 4
Step 5
⑦
Chaise Seat Frame(C)
Cover the bottom of the Chaise Seat Frame(C) with the non-woven fabric.
Smooth down the Magic Tape on all four sides of the Seat by hand.
Leg (E)
Gasket (⑦)
Chaise Seat Frame(C)
Install the Legs(E) into the bottom of Chaise Seat Frame(C) by placing a Gasket(⑦)
onto the threaded stem of the Legs.
And then insert the threaded stem into the threaded mounting position at each
Corner of Chaise Seat Frame(C).
Tighten by turning the Legs clockwise.
Note: The usage of Gaskets(
) are OPTIONAL and are especially useful to help
alleviate slight wobbles. Some Legs may need more than one Gasket whilst
some Legs may not need any.
Position Sofa right side up and test for stability on a Level Surface.
Add or remove Gaskets(⑦) where needed to achieve stability.
Page 5 OF 8
Step 6
Step 7
Seat Cushion(B)
Back Cushion(D)
Chaise Seat Frame(C)
Step 6.1 Put the Seat Cushion(B) on the Chaise Seat Frame(C) as shown.
Step 6.2 Put the Back Cushion(D) on the Chaise Seat Frame(C) as shown.
Your Armless Sofa is ready for use.
Your Armless Sofa can only be used on a flat, level surface.
Page 6 OF 8
If you already purchased 2 or more than 2 products, Please read on
Step 8
Connecting the two sofas by using the pre-fixed Connecting Piece(⑥) as shown in
above picture.
Page 7 OF 8
Page 8 OF 8
Loading...