Alcott Hill W000498987 Installation & Assembly

PARTS #

PARTS NAME

QTY

P1

Front Legs

2

P2

Back Legs

2

P3

Backrest

1

P4

Chair Seat

1

Hardware#

PARTS NAME

QTY

H1

Plastic Washer

4

Assembly Instruction---Recliner Chair

DRAWING

DRAWING

1.Place chair(P4) upside down onto a protective cloth. Remove legs and plastic washer
from the chair bottom.

4.Smooth down the fabric flap on the Chair Backrest.Run your hands down both sides of
the flap,from top to bottom,allowing the velcro tape to adhere to the flap under the seat of
the chair.Assembly is complete.

3.Insert the small metal arms on the sides of the Chair Backrest(P3) into the prefabricated
slide lock gadget on the Chair Seat(P4) as shown below.

2.Place washers(H1) on legs(P1,P2) and attach to base by screwing clockwise into
corresponding holes.

P1

P2

P1

H1

P4

P3

P4

P4

P4

PAGE 1 OF 1