Alcott Hill W000351409 Installation & Assembly

ASSEMBLY INSTRUCTIONS
Dimension
Cube Size :39.9”x18.6”x9.8”
: 18.5"x21"x38"H
- 1 -
BEFORE ASSEMBLY
NOT INCLUDED
Thank you for purchasing this quality product. This product has been designed for easy assembly and constructed for durability. Please take the time to read and follow the assembly instructions carefully.
IMPORTANT NOTE:
- Place all wooden parts on a clean and smooth surface such as a rug or carpet to avoid the parts from being scratched.
emove all wrapping material, including staples & packing straps before you start to assemble.
- R
- DO NOT tighten all screws and bolts until completely assembled.
- Keep all hardware parts out of reach of children.
ASSEMBLY TOOLS REQUIRED
PART LIST
When unpacking, please be careful not to discard any parts with the packaging. Before continuing, please make sure you have the following parts:
NO Description Qty Sketch NO Description Qty Sketch
Chair back 1
A
C
Front Leg 2
Seat Frame 1
B
- 2 -
HARDWARE LIST
STEP 1
When unpacking, please be careful not to discard any parts with the packaging. Before continuing, please make sure you have all of the following hardware:
NO Description Qty Sketch NO Description Qty Sketch
1
3
5
Long bolt
4
(M6x80mm)
Short bolt
2
(M6x40mm)
Flat Washer
10
(Ф6.5x19)
2
4
6
Medium bolt
4
(M6x60mm)
Lock Washer
10
(Ф6.5x9)
Allen Key
1
(4mm)
Attach frame (B) to the back (A) by using bolts (3) and (1) and washers (4) and (5). Tighten with Allen Key (6). Note: DO NOT tighten any of the bolts, until the chair is assembled, then put on a flat level surface to make sure the chair is level and then tighten the bolts.
X2
- 3 -
STEP 2
Attach front legs (C) to the seat frame. Use bolts (2), washers (4) and (5) .Tighten with Allen Key (6).
.
- 4 -
Loading...