
30 MINUTES
( A ) ( D )
FRONT PANEL
( B )
( E )
BACK PANEL 1 PC TOP PANEL 1 PC
( C )
SIDE PANEL 2 PCS
ASSEMBLY TIPS:
1. Remove hardware from box and sort by size.
2. Please check to see that all hardware and parts are present prior start of assembly.
3. Please follow attached instruction in the same sequence as numbered to assure
fast & easy assembly.
Warning!
1. Don't attempt to repair or modify parts that are broken or defective.
Please contact the store immediately.
2. This product is for home use only and not intended for commercial
establishments.

Z
NO Q' TY
1 14PCS
2 14PCS
3 14PCS
4 6PCS
5 2PCS
6 30PCS
7 2PCS
8 1PC
9 1PC
10 2PCS
CMA-BOLT
∮7mm x 35mm - SR
CAM-LOCK
∮25mm x 11mm - SR
BOLT AND SCREW
1/4" x 11mm - BLK
LID SUPPORT
160mm x 30mm x 16mm
LATCH FOR TOP LID
45mm x 13mm x 18mm

Close the top panel and press
down forcefully.
STEP 8
Place the latch top (9) at the center marked location of the top panel
(E), then use screw (6) to secure the latch top (9).

CHEST LOCK INSTRUCTIONS
Press the lock button to open the chest.
To secure the top in the closed position, press the lock button and hold while
closing the top. This will secure the top and it cannot be opened without
pressing the lock button.
If closing the top without pressing the lock button it does not secure the top
in the closed position and it can be opened without touching the lock.
To lock your chest, rotate key counter clockwise to unlock your chest,
rotate key lockwise.