Label Picture Description QTY
A
Table Top 1
B Table Leg 4
Label Picture Description QTY
① Allen Key 1
② Bolt (M6*20) 17
③ Washer 17
Caution : You must read this before you proceed
Table
Step 1
This Table has multiple parts and may require up to 30 minutes to assemble.
To give you an overview of the Table parts, the above picture is to help you put the various parts
into perspective. Please read through the instructions below to familiarise yourself with the parts
and steps before assembly.
Open the carton and place all the parts onto a clean, non-marring surface.
Place the Table Top(A) facedown, as shown in picture above.
Before Beginning Assembly:
Overview
FRONT FACING
Table Leg (B)
Table Top (A)
Step 2
2.1: Align Table Leg(B) to mounting positions on the Table Top(A). Attach Table Leg(B) to Table
Top(A) using Bolts(②) and Washers(③) with Allen Key(①).
2.2: Attach the remaining Table Legs(B) to Table Top(A) using Bolts(②) and Washers(③) with Allen
Key(①).
Do not fully tighten the Bolts.
Step 3
Place the Table on a LEVEL SURFACE to check for wobbles.
If it wobbles lift the Table to some 30cm to 50cm high from the ground.
Keep your feet and toes well away from the drop zone.
Drop the Table freely and vertically with the four legs, hitting the ground, all at the same time.
This Drop Test will help to ensure that all the Bolts and gaps reach full alignment status.
Test again for evenness on a LEVEL SURFACE.
If no wobbles are found, slowly and steadily, turn the Table upside down.
Then, proceed to tighten all Bolts in a sequential manner.
When tightening these Bolts, tighten sequentially.
DO NOT tighten any Bolt fully and then move on towards the next one.
This could cause the frame to warp.
If there are still wobbles, loosen the Bolts and execute this same drop test.
If the Table is not Stable, it could lead to damage to the product.
Your Table is ready for use.
This Table can only be used on a flat, level surface.
What is Proposition 65?
Proposition 65 is a California law that requires warning labels on products that may contain one of
more than 800-plus chemicals or ingredients that the California Office of Environmental Health
Hazard Assessment (OEHHA) has deemed to cause cancer or other reproductive toxicity.
Chemicals and elements on this list include wood dust, brass, and other everyday substances,
which can be found in very common household items, such as: lamps, tableware, jewelry, crystal
glasses, electric cords, beauty products, automobiles, and furniture.
Why Did I Find a Proposition 65 Warning on My Home Goods Product?
We include Proposition 65 warnings on all of our products because there is always a chance that
one of the 800-plus common chemicals and ingredients listed under this law could potentially be on
our furniture or packing materials. We risk large fines under this law, if we don't include this
warning.
Should I worry?
We realize you may be worried finding this warning on our products, but we want to reassure you
that the hazardous exposure limits for any of these chemicals have never been found on furniture
products that we’ve shipped to our customers. Additionally, this warning label is very common and
can be found on almost every piece of furniture sold in the state of California.
Just How Common Are Proposition 65 Warnings?
Proposition 65 warnings have become so common in California that it is hard to take a trip to a local
bank, grocery store, or restaurant without finding at least one warning. In fact, even the Disney
Land Resort has a Proposition 65 warning:
Loading...