ASSEMBLY INSTRUCTIONS
Made in China
Thank you for purchasing this product. We want to make sure it is complete and to your satisfaction. Please check all
packing material carefully for small parts which may have come loose inside the carton during shipment. Hardware
can be identified by bright red packaging, Separate, identify, and count all parts and hardware to make sure they
match with the illustrations herein and are all present. If any part(s) are missing or defective please contact our
Customer Service. Contact information is given at the bottom of these instructions. If you feel the item is defective
beyond are solution with part replacements, please return this product with your receipt to the place of purchase. If
purchased from an internet retailer, please contact their customer service department. Photo’s and additional
information may be requested to validate the claim. Product is not to be returned to our Company under any
circumstance unless authorized by us or an authorized dealer or representative. Thank you.
ATTENTION: SOME LETTERED PARTS LISTED ON THE INSTRUCTION SHEET MAY NOT BE IN PARTS BAG AS THEY MAY ALREADY
BE ASSEMBLED. CAREFULLY CHECK PARTS AND PACKING MATERIALS PRIOR TO ORDERING REPLACEMENTS.
Tools Required for assembly: Phillips Screwdriver (not included)
WARNING: DO NOT FULLY TIGHTEN SCREWS AND BOLTS UNTIL ALL PARTS HAVE BEEN ASSEMBLED PROPERLY.
TO PREVENT SCRATCHING THE TOP SURFACE, ASSEMBLE PRODUCT ON A SMOOTH SURFACE.
DO NOT OVER TIGHTEN SCREWS AND BOLTS.
(A) TOP
(B) LOWER ARMOIRE
(C) BACK LEGS (2)
(D) FRONT LEGS(2)
(E) RIGHT SIDE DOOR
(F) LEFT SIDE DOOR
(G) CROSS BRACE
(H) UPPER ARMOIRE
(I) FALSE DRAWER
(J) SMALL DRAWER WITH 9 SQUARES
(K) SMALL DRAWER
(L) LARGE DRAWERS (2)
(M) FRONT DOOR
PP
ARTART
P
ART
PP
ARTART
G
F
SS
S
SS
B
H
A
J
K
E
I
M
L
L
HARDHARD
HARD
HARDHARD
WW
W
WW
C
C
AREARE
ARE
AREARE
D
D
N O P Q R S T U V
(8PCS) (3PCS) (4PCS) (3PCS) (5PCS) (8PCS) (2PCS) (8PCS) (1PC)
STEP 1
M
C
B
P
B
P
STEP 2
C
D
B
D
C
S
U
N
B
L
STEP 3
B
H
L
M
STEP 4
B
O
H
B
O
O
F
STEP 5
E
H
E/F
B
H
H
STEP 6
H
G
Q
B
Q
STEP 7
A
A
STEP 8
H
R
WALL
T
R
R
H
H
B
TO PREVENT TIP OVER,
THE PRODUCT MUST
BE ATTACHED TO WALL.
WARNING
!
Serious or fatal crushing injuries can occur
from furniture tip-over. To help prevent tipover:
Place heaviest items in the lowest drawers.
Unless specifically designed to accommodate,
do not set TVs or other heavy objects on the
top of this product.
Never allow children to climb or hang on drawers,
doors, or shelves.
Never open more than one drawer at a time.
Use of tip-over restraints may only reduce,
but not eliminate, the risk of tip-over.
This is a permanent label. Do not attempt to remove !
STEP 9
Made in China
V
WALL
R
Loading...