Alchemist Product 8 Transport Owners manual
ALCHEMIST
PRODUCT
EIGHT
Transport
8
INSTRUCTION
MANUAL
POSITIONING
The Product 8 Transport, for best results, should be mounted on a solid flat surface. At all times this surface should
be level. The Product 8 Transport should also be placed in a position free from direct sunlight, dust, heat and any
source of humidity.
MAINS POWER CONNECTION
The Product 8 Transport comes with an IEC mains lead fitted with the relevant plug type for the country of use. If
there is any need to change this then follows the relevant instructions for the plug type used.
There is an external replaceable fuse on the rear of the unit: refer to specifications for fuse value.
Never replace with a different value.
Be sure that your system is switched off whilst connecting / disconnecting any leads.
PRODUCT 8 TRANSPORT
POWER
STOP
DOWN
PLAY
UP
OPEN/CLOSE
FASCIA C ONTROLS
The controls on the fascia of the Product 8
Transport are: Up, Down, Play, Stop,
Open/Close and Power. All functions
(except Power) are duplicated on the
Product 8 Transport remote handset.
U
P: This function will increase the track
number by one.
D
OWN: This function will decrease the
track number by one.
P
LAY: Pressing this will set the Product 8
Transport in the play mode.
S
TOP: Pressing this function will cancel
any function or command that the
Product 8 Transport is currently
performing. Pressing this function twice
will also cancel any program sequence
that is outstanding.
O
PEN/CLOSE: This function, when
pressed for the first time, will open the CD
drawer and allow you to load your CD
disc. Pressing this function again will load
the CD disc into the Product 8 Transport.
OWER: This will either fully power up the
P
Product 8 Transport or be completely
switched off.
CONTROLS
displ
prog
clear
check
a+b
scan
1
4
7
time
vol-
2
5
8
0
mute
shuffle
repeat
3
6
9
space
vol+
REMOTE H ANDSET
The Product 8 Transport supplies with a full
function handset. It needs two R03 AAA
1.5V batteries to operate and the functions
are as follows:
Power Standby (not used on the
Product 8 Transport)
Toggles the LCD display brightness,
displ
on/medium/off
prog
Program button
Delete a programmed track
clear
Check programmed tracks
check
Repeat a session of a track from a
a+b
specific point to another
Random play
shuffle
Open/Close the CD drawer
KEYPAD
Search up
Search down
Stop
Track up
Track down
Play
Pause
Scan all the tracks on the CD with
scan
10 sec. intro
Repeat all the tracks or a single
repeat
track
Toggles between the elapsed or the
time
remaining time of a track or the CD
space
Add 4 sec. in-between tracks
(not used on the Product 8
vol-
Transport)
(not used on the Product 8
vol+
Transport)
(not used on the Product 8
mute
Transport)
Loading...