Alchemist AC-1 Owners manual

ALCHEMIST

AC1

Compact

Disc

INSTRUCTION
MANUAL

POSITIONING

The AC1 Compact Disc, for best results, should be mounted on a solid flat surface. At all times this
surface should be level. The AC1 should also be placed in a position free from direct sunlight, dust,
heat and any source of humidity.

MAINS POWER CONNECTION

The AC1 comes with an IEC mains lead fitted with the relevant plug type for the country of use. If
there is any need to change this then follows the relevant instructions for the plug type used.

There is an external replaceable fuse on the rear of the unit: refer to specifications for fuse value.

Never replace with a different value.

Be sure that your system is switched off whilst connecting / disconnecting any leads.

OPEN/

AC1 ALCHEMIST COMPACT DISC PLAYERAC1 ALCHEMIST COMPACT DISC PLAYER

PLAY/

PLAY/

PAUSE

PAUSE

STOP

OPEN/

CLOSE

CLOSE

RANDOM POWER

CONTROLS

The controls on the fascia of the AC1 are: Track Up/Down, Play/Pause, Stop, Open/Close, Random
and Power. All functions are duplicated on the AA range system remotehandset.

Track Up/Down: This function is controlled by the central knob. When rocked to the left once the
track number will decrease by one. If it is held over to the left then the track number will decrease
rapidly. The opposite is true for rocking the knob to the right.

Play/Pause: When this function is depressed for the first time it will set the AC1 in the play mode. If it
is done before any track numbers are selected then it will begin from the first track of your CD disc.
When this function is pressed for a second time the play mode will be paused . To return back to the
play mode press once again.

Stop: Pressing this function will cancel any function or command that the AC1 is currently
performing. Pressing this function twice will also cancel any programsequencethatis outstanding.

Open/Close: This function, when pressed for the first time, will open the CD drawer and allow you to
load your CD disc. Pressing this function again will load the CD disc into the AC1. Once loaded the
AC1 will read the contents of your CD disc and display the number of tracks available.

Random: This function, when selected, will play the available tracks on your CD disc in a random
order. Please note that on subsequent uses of this function the order that the tracks are played in may
differ.

Power: This will either fully power up the AC1 or be completely switched off.