Alcatel Vacuum Technology Adixen ATP 150, Adixen ATP 100, Adixen ATP 900, Adixen ATP 80 C, Adixen ATP 150 C User Manual

ATP SERIES

POMPES TURBOMOLECULAIRES

TURBOMOLECULAR PUMPS

Réalisation/Publication: Alcatel Vacuum Technology France - Manuel Utilisateur - Ed 11 - Date : 03/2007 - Référence : 102710 *102710*

Manuel utilisateur

User’s manual

Alcatel Vacuum Technology, as part of the
Alcatel-Lucent Group, has been supplying
vacuum pumps, helium and hydrogen leak
detection systems, plasma sensors, vacuum
measurement for several years.
Thanks to its complete range of products, the
company has become an essential player in
multiple applications : instrumentation, Research
& Developement, industry and semiconductors.

Alcatel Vacuum Technology has launched Adixen,
its new brand name, in recognition of the
company’s international standing in vacuum
position.
With both ISO 9001 and 14001 certifications, the
French company is an acknowlegded expert in
service and support, and Adixen products have
the highest quality and environmental standards.

With 45 years of experience, AVT today has a
worldwide presence, through its international network
that includes a whole host of experienced subsidiaries,
distributors and agents.
The first step was the founding of Alcatel Vacuum
Products (Hingham- MA) in the United States, thirty
years ago, reinforced today by 2 others US
subsidiaries in Fremont (CA) and Tempe (AZ).
In Europe, AVTF-France headquarters and its
subsidiaries, Alcatel Hochvakuumtechnik (Germany),
Alcatel Vacuum Technology UK (Scotland), Alcatel
Vacuum Technology Benelux (Netherlands), Alcatel
Vacuum Systems (Italy) and more recently Adixen
Sensistor AB in Sueden (in 2007) form the foundation
for the European partner network.
In Asia, our presence started in 1993 with Alcatel
Vacuum Technology (Japan), and has been
strengthened with Alcatel Vacuum Technology Korea
(in 1995), Alcatel Vacuum Technology Taiwan (in

2001), Alcatel Vacuum Technology Singapore, Alcatel
Vacuum Technology Shanghai (China) (in 2004)
This organization is rounded off by more than 40
represensatives based in a variety of continents.

GB 02834 – Ed 04 – March- 2007

Thus, whatever the circumstances, the users of Adixen
products can always rely on quick support of our
specialists in Vacuum Technology.

ATP Series Turbomolecular Pumps

1/1

GB 00393 - Edition 10 - March 00

Welcome

Dear Customer,

You have just purchased an
Alcatel turbomolecular pump.
We would like to thank you
and are proud to count you
as one of our customers.

This product has benefited
from Alcatel's many years
of experience in the field of
turbomolecular pump design.

In order to ensure the best
possible performance of
the equipment and your
complete satisfaction in
using it, we advise you to
read this manual carefully
before any intervention
on your pump and to pay
particular attention to the
equipment installation and
start-up section.

APPLICATIONS:

• INDUSTRY
Cryogenics, Freeze drying, Vacuum drying, etc.

• I

NSTRUMENTATION

Mass spectrometry, surface analysis, etc.

• R

ESEARCH AND DEVELOPMENT

Ultra-high vacuum systems, Particle accelerators, etc.

• V

ARIOUS SEMICONDUCTOR PROCESSES

A

DVANTAGES:

The reliable and sturdy design of ATP pumps ensures perfor­mance suited to the fields of application concerned.

Alcatel Vacuum Technology France - ATP User’s Manual

MANUAL REFERENCE: 102 710

DITION: 11 - April 2007

E

GB 00394 - Edition 10 - March 00

Contents

ATP User’s Manual

Introduction

■

Introduction to the ATP range and

its associated ACT controllers . . . . . . . . . . .

■ A 10

■ Turbomolecular pump operating principle . . . . ■ A 20

■ The differents versions . . . . . . . . . . . . . . . ■ A 30

■ ACT controllers control modes. . . . . . . . . . . ■ A 40

■ Accessories. . . . . . . . . . . . . . . . . . . . . . ■ A 50

■ Integrable controllers . . . . . . . . . . . . . . . . ■ A 60

■ Technical characteristics of pumps . . . . . . . . ■ A 70

■ Dimensions of pumps . . . . . . . . . . . . . . . . ■ A 80

■ Controller technical characteristics. . . . . . . . . ■ A 90

■ Integrable controller technical characteristics

type Board and Brick. . . . . . . . . . . . . . . .

■ A 100

■ Integrable controller technical characteristics

type OEM Board . . . . . . . . . . . . . . . . . .

■ A 110

Alcatel Vacuum Technology France - ATP User’s Manual

1/4

GB 00394 - Edition 10 - March 00

Contents

ATP User’s Manual

Alcatel Vacuum Technology France- ATP User’s Manual

2/4

Start-up

■

Safety instructions . . . . . . . . . . . . . . . . . . ■ B 10

■ Pump connections to an installation . . . . . . . . ■ B 20

■ Mechanical connections. . . . . . . . . . . . . . . ■ B 30

■ Water cooling connection . . . . . . . . . . . . . ■ B 40

■ ACT 200 T and 600 T electrical connections. . ■ B 50

■ ACT 200 T and 600 T «Remote Control»

connector wiring . . . . . . . . . . . . . . . . . . .

■ B 60

■ ACT 200 T and 600 T controller start-up . . . . ■ B 70

■ ACT 1000 T electrical connections . . . . . . . . ■ B 80

■ ACT 1000 T «Remote Control»

connector wiring . . . . . . . . . . . . . . . . . . .

■ B 90

■ ACT 1000 T controller start-up. . . . . . . . . . . ■ B 100

■ RS 232 or RS 485 serial link wiring . . . . . . . ■ B 110

■ Detailed description of RS commands

ACT 200 T and 600 T . . . . . . . . . . . . . .

■ B 120

■ Functions of integrable controllers

type Board and Brick . . . . . . . . . . . . . . . .

■ B 130

■ Functions of integrable controller

type OEM Board . . . . . . . . . . . . . . . . . .

■ B 140

GB 00394 - Edition 10 - March 00

Contents

ATP User’s Manual

Alcatel Vacuum Technology France - ATP User’s Manual

3/4

Operation

■

First pump start-up / Safety instructions . . . . . . ■ C 10

■ Turbomolecular pump operation

in a pumping application. . . . . . . . . . . . . .

■ C 20

■ Controlling the pump using the controller

front panel . . . . . . . . . . . . . . . . . . . . . .

■ C 30

■ Displaying the data concerning

ACT 200 T and 600 T pumping . . . . . . . . .

■ C 40

■ ACT 200 T and 600 T «Remote Control»

connector «Ext. safety» contact operation. . . . .

■ C 50

■ Controlling the pump using

communication software. . . . . . . . . . . . . . .

■ C 61

Maintenance

■

Diagnosis and troubleshooting

ACT 200 T and 600 T . . . . . . . . . . . . . .

■ D 10

■ Diagnosis and troubleshooting ACT 1000 T. . . ■ D 20

■ ATP 80/100/150/400

Maintenance frequency . . . . . . . . . . . . . . .

■ D 30

■ ATP 900 Maintenance frequency . . . . . . . . . ■ D 40

GB 00394 - Edition 10 - March 00

Contents

ATP User’s Manual

Alcatel Vacuum Technology France- ATP User’s Manual

4/4

Operation sheets

■

Precautions before maintenance . . . . . . . . . . ■ E 10

■ ATP 80/100 Pumps lubrication . . . . . . . . . . ■ E 20

■ ATP 150/400/900 Pumps lubrication . . . . . . ■ E 30

■ ATP 80/100 bearing replacement . . . . . . . . ■ E 40*

■ ATP 150/400/900 bearing replacement . . . . ■ E 50*

■ Cleaning parts . . . . . . . . . . . . . . . . . . . . ■ E 60*

■ Pump running-in for ATP 80/100/150/400 . . ■ E 70

■ Maintenance counters for

ACT 200 T and 600 T controllers . . . . . . . .

■ E 80

■ ATP 900 pump running-in . . . . . . . . . . . . . . ■ E 90

■ Maintenance counters for

ACT 1000 T controllers . . . . . . . . . . . . . .

■ E 100

Appendix

■

Pumping curves. . . . . . . . . . . . . . . . . . . . ■ G 10

Maintenance

components

■

Maintenance parts. . . . . . . . . . . . . . . . . . ■ F 10

* These chapters are included into the ball bearing replacement manual delivered with
the specific tool.

G 00396 - Edition 09 - February 99

1/1

Chapter A

Alcatel Vacuum Technology France- ATP User’s Manual

ATP User’s Manual

Introduction

■ Introduction to the ATP range and

its associated ACT controllers . . . . . . . . . . . . . .

■ A 10

■ Turbomolecular pump operating principle . . . . . . ■ A 20

■ The differents versions. . . . . . . . . . . . . . . . . . . ■ A 30

■ ACT controllers control modes . . . . . . . . . . . . . ■ A 40

■ Accessories . . . . . . . . . . . . . . . . . . . . . . . . . ■ A 50

■ Integrable controllers . . . . . . . . . . . . . . . . . . . ■ A 60

■ Technical characteristics of pumps . . . . . . . . . . . ■ A 70

■ Dimensions of pumps . . . . . . . . . . . . . . . . . . . ■ A 80

■ Controller technical characteristics . . . . . . . . . . . ■ A 90

■ Integrable controller technical characteristics

type Board and Brick . . . . . . . . . . . . . . . . . .

■ A 100

■ Integrable controller technical characteristics

type OEM Board . . . . . . . . . . . . . . . . . . . . .

■ A 110

A 10

Introduction to the ATP range and
its associated ACT controllers

Alcatel Vacuum Technology France - ATP User’s Manual

GB 00397 - Edition 02 - February 99

1/2

- Ceramic ball bearings lubricated with grease;

- Adjustable rotation speed between 6000 and 27000 rpm;

- Natural convection, air or water cooling;

- "C" version for corrosive application with nitrogen purge;

- "HPC" high pressure version for semiconductor applications.

ATP turbomolecular

pumps

ACT Controllers

Main characteristics

- Alphanumeric display;

- Membran keyboard;

- Monitoring of testing and
troubleshooting parameters;

- Dry contact interface for
status signals;

- Optocoupled control inputs;

- RS 232/485 serial links;

- Operation at all voltages
between 85 and 264 V,
50/60 Hz.

The range of ACT controllers offers flexible use and
interfacing:

5 turbomolecular pump models from 80 to 900 l/s

3 controller models type ACT

A 10

Introduction to the ATP range and
its associated ACT controllers

Alcatel Vacuum Technology France - ATP User’s Manual

GB 00397 - Edition 02 - February 99

2/2

The different products

available

The pumps ATP 80 ATP 100 ATP 150 ATP 400 ATP 900

ATP 80 C ATP 100 C ATP 150 C ATP 400 C ATP 900 C

Intake flange

DN 63 ISO-K DN 100 ISO-K DN 100 ISO-K DN 160 ISO-K DN 200 ISO-K

DN 63 CF-F DN 100 CF-F DN 100 CF-F DN 160 CF-F DN 200 CF-F

natural convection

xx

Cooling type

air x x x x x

water x x x x x

The pumps

ATP 400 HPC ATP 900 HPC

Intake flange

DN 100 ISO-K DN 200 ISO-K
DN 160 ISO-K DN 200 CF-F

Water cooling x x

The controllers ACT 200 T ACT 600 T ACT 1000 T

Cable length 1 m / 1,5 m 1 m / 1,5 m 3.5 m / 5 m

3.5 m / 5 m 3.5 m / 5 m 10 m

10 m / 20 m 10 m / 15 m / 20 m

Electronic boards to be

inserted in a rack x x

A 20

Alcatel Vacuum Technology France - ATP User’s Manual

GB 00398 - Edition 01 - March 97

1/1

Turbomolecular pump operating
principle

The turbomolecular pump in
an installation

Functional diagram

In molecular operation, the gas molecules of the vacuum
system arrive at the pump intake. They are trapped
between the rotating disks of the rotor and the stationary
disks of the stator and carried to the exhaust of the pump.

At the turbomolecular pump exhaust, the gases are
evacuated to the atmosphere by a primary pump.
Since the ATP compression rate is set by the design, the ATP
limit pressure is given by that of the primary pump used.

The ceramic ball bearings

lubricated with grease enable

the pump to be fitted in any

position.

Inlet

Rotor

Stator

Dynamic

seal

Exhaust

Motor

INLET

PRESSURE

Secondary
pumping

Chamber

to be

pumped

Secondary vacuum

Primary
pumping

Primary vacuum

ATMOSPHERIC
PRESSURE

A 30

The different versions:
Standard, "C" Corrosive, etc.

Alcatel Vacuum Technology France - ATP User’s Manual

GB 00399 - Edition 01 - April 97

1/2

Standard Version

Pumping of clean, non-

corrosive gases

As for the entire range, the pump rotation speed is
adjustable, making it possible to produce the optimum
pumping characteristics for the customer's application.
There are two different types of speed:

- the nominal speed which corresponds to the maximum
rotation speed of the pump, or 27000 rpm;

- the reduced speed, or STANDBY speed, adjustable
between 6000 and 27000 rpm.

The inverted dynamic seal creates a high compression rate
between the bearings and the pump exhaust and thus
minimizes the quantity of corrosive gases in contact with
the bearings.

When used with a gas purge for high flow rate
applications, the dynamic seal can, on its own, provide
excellent protection for ultravacuum applications.

"C" Version

Corrosive applications

Inlet

Exhaust

N

2 Purge

A 30

The different versions:
"HPC" High Pressure Corrosive

Alcatel Vacuum Technology France - ATP User’s Manual

GB 00399 - Edition 01 - April 97

2/2

These pumps are specially designed for high flow rate
applications in semiconductor applications. They provide:

- increased bearing protection;

- effective bearing protection when the purge is stopped
during equipment calibration;

- a reduction in the purge gas flow rate;

- a long bearing service life in the presence of corrosive
gases.

The pumps can be heated by the water circuit to prevent
condensation of the process gases (water circuit
temperature ≤ 65°C).

"HPC" Version

Corrosive version for

semiconductor

applications

Inlet

Exhaust

Water circuit

N2 Purge

A 40

ACT controllers control modes

Alcatel Vacuum Technology France - ATP User’s Manual

GB 00400 - Edition 02 - February 99

1/2

Local mode control

The front panel of the unit
comprises:

Remote controls

The remote control

The remote control with the
REMOTE CONTROL connector

is used:

- for the remote control of
the START, STOP, STANDBY
functions;

- to replicate the monitoring
parameters available in
the form of dry contacts.

The RS232 serial link is used to control and monitor
the pump using a computer.

The RS485 serial link allows many pump installation in
a network.

The wiring characteristics are given on B 110.

Parameter selection and
configuration keys

Manual control keys

Parameter and message
LCD display

Pump status indicator lights

START

STOP

ENTER STAND BY

PREVIOUS

ACT 200 T

FAULT

0

1

RS 232 / 485

TURBO PUMP CABLE

REMOTE CONTROL

1

1

RS 232 serial link

RS 485 serial link

2

2

2

A 40

ACT controllers control modes

Alcatel Vacuum Technology France - ATP User’s Manual

GB 00400 - Edition 02 - February 99

2/2

The ACT 600 T and

ACT 1000 T controllers are

1/2 rack units

START STOP

STATUS STAND BY

ENTER

PREVIOUS

ACT 600 T

FAULT

A 50

Alcatel Vacuum Technology France - ATP User’s Manual

Accessories

This filter protects the pump against solid particles.
Mesh size 6 mm.

This filter stops particles ≥ 20 microns and is used in the
event of high densities of dust or risks of implosion when
pumping tubes or lamps.

Bake-out collar

Compact filter

Screen filter

Air refill

electrovalve system

This accelerates degassing and reduces the pressure
lowering times.

This is used to refill the pump with air after stopping
pumping or for a power supply cut.

GB 00401 - Edition 02 - February 99

1/2

Pump accessories

Exhaust

Venting valves

DN 25 DN 40

Powered and controlled by the ACT

101923*

Powered by the mains and

controlled by the ACT

240V 50/60Hz 063177 063478
220V 50/60Hz 056994 063191
200V 50/60Hz 063176 063480
115V 50/60Hz 063089 063099
100V 50/60Hz 063175 063479

* ATP 900 only

Filter Inlet flange

P/N DN 63 DN 100 DN 160 DN 200

ISO-K 063000 056844 056942 063158

CF-F 063115 056845 056928 063159

Filter Inlet flange

P/N DN 63 DN 100 DN 160 DN 200

ISO-K 063214 063215 063216 062911

P/N

Pump type

ATP 80 ATP 100 ATP 150 ATP 400 ATP 900

200/240V

056934 056934 063028 101926 063324

50/60Hz

100/115V

063180 063180 063181 101927 063323

50/60Hz

A 50

Accessories

Alcatel Vacuum Technology France - ATP User’s Manual

GB 00401 - Edition 02 - February 99

2/2

Reduction flanges

Power supply cable

Connection cable between the pump and the controller.

Cable length

ACT 200 T

P/N

1 m

1.5 m

3.5 m
5 m
10 m
15 m
20 m

105185

A458759

101956
101957
101958

-

A458477

ACT 600 T

105086

A458885

101812
101810
101811
105303

A458478

105086

A458885

101812
101810
101811

-

A458478

ACT 1000 T

Flange DN 1 / DN 2 P/N

S.S.**ALU*

Material

●

●

●

●

●

●

●

●

●

●

●

●

●

●

●

●

●

●

●

●

063268
063269
063270
063267
062900
068912
062901
068911
062902
062904
062905
062906
062903
062725
062907
062909
062908
062910
066659
066660

63 ISO-K / 25 ISO-KF
63 ISO-K / 40 ISO-KF
63 ISO-K / 50 ISO-KF
63 ISO-K / 63 CF-F
100 ISO-K / 40 ISO-KF
100 ISO-K / 40 ISO-KF
100 ISO-K / 50 ISO-KF
100 ISO-K / 50 ISO-KF
100 ISO-K / 63 ISO-K
160 ISO-K / 50 ISO-KF
160 ISO--K / 63 ISO-K
160 ISO-K / 100 ISO-K
160 CF-F / 100 CF-F
200 ISO-K / 63 ISO-K
200 ISO-K / 100 ISO-K
200 ISO-K / 100 ISO-K
200 ISO-K / 160 ISO-K
200 ISO-K / 160 ISO-K
200 ISO-K / 250 ISO-K
200 CF-F / 250 CF-F

* ALU: Aluminium ** S.S.: Stainless Steel

A 60

Alcatel Vacuum Technology France - ATP User’s Manual

GB 00402 - Edition 03 - March 00

1/2

Integrable controllers

ACT 200 T Brick

ACT 200 T Board

Electronic boards can be
substitued to the box version
of the controller
ACT 200 T when the pump
has to be integrated in a
complex installation or
equipment.
They provide the functions of
speed variator, logic control
(controlled by serial link or
dry contacts) and power
supply (ACT 200 T Brick
only) and all the necessary
securities.
The Board version must be
supplied with DC.

ACT 200 T Board

ACT 200 T Brick

ACT 600 T Brick

ACT 600 T Board

Also, theses electronic
boards can be substitued
to the box version of
the controller ACT 600 T.

ACT 600 T Board

ACT 600 T Brick

Connect the integrable controllers to the pump by ordering
separately the connection cable (see A 50 page 2).

Controller

ACT 200 T

Part Number

Board
Brick

101933
103517

ACT 600 T

102018
103997

A 60

Alcatel Vacuum Technology France - ATP User’s Manual

2/2

GB 00402 - Edition 03 - March 00

Integrable controllers

OEM Board

The integrable controller
“OEM Board” (derivated
from CFV 100 former
controller range) is a simple
PC Board which can easily
integrated in an installation.
It can drive both ATP 80 and
ATP 100 pumps, in local or
by remote control.

OEM Board: P/N. P0022E4

Power supply cable

OEM Board / ATP 80-100

To connect the PC Board ,
it is necessary to separately
order specific connection
cable.

Cable lenght

P/N

0,5 m
2,5 m
3,5 m
5 m
10 m

A458755
A458369
A458425
A458423
A458424

Accessories

Some accessoiries can be connected to the OEM Board
to extand some functions.

OEM Board accessories

P/N

Time meter 5 V
Time meter 10 V
Outside light kit
Interface kit

062761
062320
062939
062969

A 70

Alcatel Vacuum Technology France - ATP User’s Manual

GB 00403 - Edition 03 - February 99

1/3

Technical characteristics of pumps

Model characteristics 80 100 150 400 900

Inlet flange DN 63 ISO-K 63 CF-F 100 ISO-K 100 CF-F 100 ISO-K 100 CF-F 160 ISO-K 160 CF-F 200 ISO-K 200 CF-F

N2 l/s 80 100 140 400 900

Pumping speed He l/s 50 60 100 300 540

H2 l/s 40 40 80 250 300
N2 8x10

+7

8x10

+7

7x10

+8

7x10

+8

1x10

+9

Compression rate He 2500 2500 1.2x10

+4

1.5x10

+4

2x10

+4

H2 300 300 1x10

+3

1x10

+3

2x10

+3

Rotation speed rpm 27000
Reduced speed rpm from 6000
Sound level

dBA ≤ 53

Start-up time

(0 to 27000) 1min45s 1min45s 2min 3min 3min

Exhaust flange ISO-KF DN 25 DN 25 DN 25 DN 40 DN 40

Standard version characteristics ATP 80 ATP 100 ATP 150 ATP 400 ATP 900

Limit pressure* measured acc.
to Pneurop standard mbar 5x10

-9

5x10

-9

5x10

-10

8x10

-10

5x10

-10

Maximum pressure at inlet
in continuous operation**

mbar 1x10

-1

1x10

-1

1x10

-1

2x10

-2

1x10

-2

Maximum permissible
pressure at exhaust** mbar 2x10

-1

3x10

-1

4x10

-1

2x10

-1

3x10

-1

Maximum ambient temperature*

°C 50

Flange drying temperature

°C 120 120 100 100 100

natural cooling kg 3 4.3 3 4.3

Weight air cooling kg 4 5.3 4 5.3 6.5 9 17.5 18.5

water cooling kg 3.4 4.4 3.5 4.7 6.5 9 17 18

Recommended primary pump Pascal 2005 Pascal 2005 Pascal 2005 Pascal 2015 Pascal 2021

* For a water-cooled pump with CF-F flange and exhaust pressure < 1.10-2mbar.
** The two maximum pressures cannot occur at the same time

Standard version

A 70

Alcatel Vacuum Technology France - ATP User’s Manual

GB 00403 - Edition 03 - February 99

2/3

Technical characteristics of pumps

Model characteristics 80 100 150 400 900

Inlet flange DN 63 ISO-K 63 CF-F 100 ISO-K 100 CF-F 100 ISO-K 100 CF-F 160 ISO-K 160 CF-F 200 ISO-K 200 CF-F

N2 l/s 80 100 140 400 900

Pumping speed He l/s 50 60 100 300 540

H

2 l/s 40 40 80 250 300

N

2 8x10

+7

8x10

+7

7x10

+8

7x10

+8

1x10

+9

Compression rate He 2500 2500 1.2x10

+4

1.5x10

+4

2x10

+4

H

2 300 300 1x10

+3

1x10

+3

2x10

+3

Rotation speed rpm 27000
Reduced speed rpm from 6000
Sound level

dBA ≤ 53

Start-up time

(0 to 27000) 1min45s 1min45s 2min 3min 3min

Exhaust flange ISO-KF DN 25 DN 25 DN 25 DN 40 DN 40

Corrosive version «C»

Corrosives versions Characteristics ATP 80 C ATP 100 C ATP 150 C ATP 400 C ATP 900 C

Limit pressure* without purge meas.
according to Pneurop standard

mbar 5x10

-9

5x10

-9

5x10

-10

8x10

-10

5x10

-10

Limit pressure* with purge meas.
according to Pneurop standard

mbar 5x10

-8

5x10

-8

1x10

-7

1x10

-7

1x10

-7

N2 purge flow rate SCCM 50
Maximum pressure at inlet

in continuous operation** mbar

1x10

-1

1x10

-1

5x10

-1

2x10

-2

1x10

-2

Maximum permissible
pressure at exhaust**

mbar

2x10

-1

3x10

-1

4x10

-1

2x10

-1

1x10

-1

Maximum ambient temperature*

°C 40 40 40 40 50

Flange drying temperature

°C 120 120 120 100 100

N2

purge flange

ISO-KF DN 16

Weight

air cooling kg 4 5.3 4 5.3 6.5 9.1 17.7
water cooling kg 3.4 4.4 3.5 4.7 6.5 9.2 17.2

Recommended primary pump 2005 C2 2005 C2 2021 C2 2033 C2 2063 C2

* For a water-cooled pump with CF-F flange and exhaust pressure < 1.10-2mbar.
** The two maximum pressures cannot occur at the same time

A 70

Alcatel Vacuum Technology France - ATP User’s Manual

GB 00403 - Edition 03 - February 99

3/3

Technical characteristics of pumps

«HPC» version

HPC version characteristics ATP 400 HPC ATP 900 HPC

Inlet flange DN

100 ISO-K 160 ISO-K 200 ISO-K 200 CF-F

N2

l/s 325 380 700

Pumping speed Ar l/s 365 430 785

SF

6 l/s 365 430 785

N2 7x10

+6

1x10

+7

Compression rate Ar 700 2x10

+3

SF6 100 200

Limit pressure without purge meas.
according to Pneurop standard

mbar 5x10

-8

5x10

-8

Limit pressure with purge meas.
according to Pneurop standard

mbar 8x10

-6

5x10

-5

N

2 purge flow rate SCCM 50

Maximum pressure at inlet
in continuous operation*

mbar 1x10

-1

2x10

-2

Maximum permissible
pressure at exhaust* mbar 6x10

-1

4x10

-2

Rotation speed rpm 27000
Reduced speed rpm from 6000
Start-up time (0 to 27000) 2 min
Maximum ambient temperature °C

50

Water circuit temperature °C ≤ 65
Noise level

dBA ≤ 53

Weight kg 9 8.5 17.7
Recommended primary pump 2063 C2 or ADP81
Exhaust flange ISO-KF DN 40
Purge flange ISO-KF DN 16
Max N2 flux with 2063CP+

SCCM

340 400 450

* The two maximum pressures cannot occur at the same time

A 80

Dimensions of pumps

ATP 80, ATP 100

Alcatel Vacuum Technology France - ATP User’s Manual

GB 00404 - Edition 03 - March 00

1/6

65°

10

20

80,6

R

H

16

20

11

Ø 129,5

N equidistant

holes diam. 8,6

on diam. D

A°

95,4

Ø 12,1

13

119,9

1,8

24,1

118

102

H

Ø 55,8

49,5

C

67,7

77,3

C

73,6

Ø 113

45,3

Ø F

Ø 113

12

R

26,2

Ø F

Inlet flange R H C F N D A°
DN 63 ISO-K 130 151,5 102 95 - - ­DN 63 CF-F 145 166,5 117 113,5 8 92,1 7,5°
DN 100 ISO-K 103 124,5 75 130 - - ­DN 100 CF-F 123 144,5 95 148,5 16 130,2 18,75°

DN 25

ISO-KF

Water Inlet/Outlet

(Any direction)

For tube diam. 4/6

Electrical connector

DN 25

ISO-KF

N

2

PURGE

DN 16 ISO-KF

CF-F

ISO-K

A 80

Dimensions of pumps

ATP 150

Alcatel Vacuum Technology France - ATP User’s Manual

GB 00404 - Edition 03 - March 00

2/6

30°

86,6

Ø 149,7

60°

123

210,7

28

Ø 132

49,8

87,4

85,4

91,5

Ø 12,1

26,2

18,75°

175,9

97 122,1

16

116

35,5

13,4

103,2 134

15,5

221,7

Ø 132

Ø 148,5 Ø 130

12

17,2

20°

45°

Grease

DN 25

ISO-KF

N

2

PURGE

DN 16 ISO-KF

DN 25
ISO-KF

DN 100 ISO-K

DN 100 CF-F

Water Inlet/Outlet

(Any direction)

For tube diam.4/6

105

16 equidistant

holes diam. 8,6

on diam.130,2

A 80

Dimensions of pumps

ATP 400

Alcatel Vacuum Technology France - ATP User’s Manual

GB 00404 - Edition 03 - March 00

3/6

30°

45°

20°

86,6

R

C

H

26

60°

ø 189,5

106,1

H

C

E

A°

R

E

83

13,4

122,1

15,5

81,3

97

175,9

91,5

Ø 12,1

26,2

17,2

Ø 189,5

Ø F

Ø F

Inlet flange R H C F E N T D A°
DN 100 ISO-K 181,6 247,4 146,9 130 12 - - - ­DN 100 CF-F 183,1 248,9 148,4 148,5 16 16 8,6 130,2 3,75°
DN 160 ISO-K 151,1 216,9 116,4 180 12 - - - ­DN 160 CF-F 168,1 233,9 133,4 198 16 20 8,6 181,1 6°
ASA 6" 161,1 225,9 125,4 279,4 19 8 20,6 241,3 22,5°

DN 40
ISO-KF

DN 40
ISO-KF

Grease

ISO-K

CF-F - ASA

Water Inlet/Outlet

(Any direction)
For tube diam. 4/6

N equidistants

holes diam. T

on diam. D

A 80

Dimensions of pumps

ATP 900

Alcatel Vacuum Technology France - ATP User’s Manual

GB 00404 - Edition 03 - March 00

4/6

30°

45°

20°

R

H

C

E

Ø 240

60°

118,2

26

Ø F

235,1

134

A°

124,2

Ø 12,1

26,2

Ø F

E

C

R

83,6

81,3

13,4

168

17,8

15,5

H

Ø 240

Inlet flange R H C F E N T D A°
DN 200 ISO-K 145,8 211,5 118,5 240 12 - - - ­DN 200 CF-F 165,8 231,5 138,5 253,2 20 24 8,6 231,9 7,5°
ASA 6" 177,8 243,5 150,4 279,4 19 8 20,6 241,3 22,5°

DN 40
ISO-KF

N

2

PURGE

DN 16 ISO-KF

DN 40
ISO-KF

Grease

ISO-K

CF-F - ASA

Water Inlet/Outlet

(Any direction)
For tube diam. 4/6

N equidistant

holes diam. T

on diam. D

A 80

Dimensions of pumps

ATP 400 HPC

Alcatel Vacuum Technology France - ATP User’s Manual

GB 00404 - Edition 03 - March 00

5/6

30°

45°

20°

86,6

114,4

114,9

A°

90

11,5 85,1

Inlet flange R H C F E N T D A°

DN 100 ISO-K 181,6 247,4 148,4 130 12 - - - ­DN 100 CF-F 183,1 248,9 148,4 148,5 16 16 8,6 130,2 3,75°
DN 160 ISO-K 151,1 216,9 116,4 180 12 - - - ­DN 160 CF-F 168,1 233,9 133,4 198 16 20 8,6 181,1 6°
ASA 6" 161,1 225,9 125,4 279,4 19 8 20,6 241,3 37,5°

DN 40

ISO-KF

Grease

CF-F - ASA

60°

E

C

R

H15,5

Ø 189,5

Ø F

106,1

DN 40

ISO-KF

ISO-K

81,3

Water Inlet/Outlet

(Any direction)

For tube diam. 4/6

N equidistant

holes diam. T

on diam. D

A 80

Dimensions of pumps

ATP 900 HPC

Alcatel Vacuum Technology France - ATP User’s Manual

GB 00404 - Edition 03 - March 00

6/6

30°

45°

20°

60°

150,1

A°

70,811,5

76

C

R

H

E

8,5

Ø 260

Ø 240

Ø F

118,2

15,5

81,3

86,6

149,6

Inlet flange R H C F E N T D A°
DN 200 ISO-K 145,8 211,5 118,5 240 12 - - - ­DN 200 CF-F 165,8 231,5 138,5 253,2 20 24 8,6 231,9 7,5°
ASA 6" 177,8 243,5 150,4 279,4 19 8 20,6 241,3 22,5°

DN 40
ISO-KF

N

2

PURGE

DN 16 ISO-KF

N

2

PURGE

DN 16 ISO-KF

DN 40
ISO-KF

Grease

ISO-K

CF-F - ASA

Water Inlet/Outlet

(Any direction)
For tube diam. 4/6

N equidistant

holes diam. T

on diam. D

A 90

Alcatel Vacuum Technology France - ATP User’s Manual

GB 00405 - Edition 03 - February 99

1/2

Controller technical characteristics

Electrical characteristics

ACT 200T and ACT 600T

Dimensions

ACT 200T

ACT 600T

Characteristics ACT 200T ACT 600T

Weight kg 2.6 4
Dimensions HxLxP mm 128.4x107x220 128.4x213x245
Nominal voltage 85-132 V et170-264V 48/63 Hz
Maximum current 5.8 A / 3 A
Maximum power W 100 300
Ambient operating temperature T ≤ 50°C

Customer mains circuit breaker rating

10 A

122.4

128.4

PREVIOUS

START
STOP

107

91.4

FAULT

ACT 200T

+

STAND BYENTER

Ø 3

217 3

112,5

Ø3

ACT 600T

198.1

PREVIOUS ENTER

START

+

FAULT

213

112,5

242

122.4

STAND BYSTATUSSTOP

128.4

3

A 90

Controller technical characteristics

Alcatel Vacuum Technology France - ATP User’s Manual

GB 00405 - Edition 03 - February 99

2/2

Electrical characteristics

ACT 1000T

Dimensions

ACT 1000T

Characteristics ACT 1000T

Weight kg 8.5
Dimensions HxLxP mm 132.5x219x453
Power supply

100-120 V 200-240 V

50/60 Hz

Maximum power W 800
Ambient operating temperature T ≤ 50°C

Customer mains circuit breaker rating 16 A

112.5

100

54.75

5

122.4

453

408

109.5

M 4

219

132.5

STARTSTART

PREVIOUSPREVIOUS

ACT 1000 TACT 1000 T

STATUSSTATUSSTOPSTOP

--

FAULTFAULT

STAND BYSTAND BY

++ ENTERENTER